Tool grinding machine

Wendt SS60

Year of construction: 2007, condition: used, max. wheel diameter 400 mm gear width - mm max. module - workpiece dia. 36-300/400 mm axis distance 135-290 mm spindle turning speed - stepless 3000 1/min dist. between centers 100-550 mm Control weight of the machine ca. 4000 kg dimensions of the machine ca. 2000x3055x2788 mm Test method: - Single flank rolling test - Double flank rolling test - Structure-borne noise test - Heli testing in two-flank contact. Features: Iedpfxegr Haro Agzotr - Use of up to 6 test slides - Highest testing accuracy and repeatability - Machine table with workpiece drive - Swiveling pneumatic unit - Spray oil lubrication (type: Vogel) - Oil mist extraction (type: Elbaron)

Condition: new, Year of construction: 2025, DPF MASTER FLASH STANDARD ™ is a compact device for regenerating diesel particulate filters (DPFs) using a hydrodynamic method. It features a 150-liter tank, a pump with a capacity of up to 133 L/min, and a built-in filtration system. The cleaning process operates in an automatic cycle, restoring 99% of the filter's factory parameters. The device comes with adapters that enable the connection of all DPF filters from passenger cars. To enhance the efficiency of the regeneration process, we recommend purchasing the dedicated DPF Heater Pro+ drying system at a promotional price. TECHNICAL DATA: - Weight: 200 kg - External chamber dimensions (cm): 150 x 80 x 131 - Fluid tank: 150 liters - Operating pressure: 3 bar - Power supply: 3 x 400 V - Maximum power: 6 kW - Frequency: 50 Hz - Fluid temperature adjustable between 30°C and 100°C - Pump capacity: up to 133 L/min - Fluid filtration: 5 - 100 microns Itsdpfx Aogllxgogzjr - Safety features: temperature sensor, fluid level sensor, emergency safety switch - Declaration of conformity: CE EQUIPMENT: - Fluid level sensor - Temperature sensor - Programmable temperature regulator - Programmable controller for automatic cycle operation - 150-liter water tank - Water pump with a capacity of up to 133 L/min - Built-in pressure reducer (0-8 bar) - Built-in filtration system - Adapters for DPF filters With the purchase of our machine, you will receive a starter kit to help you start operating at full capacity. The kit includes: - A set of 3 filter cartridges + 3 replacements - XPOWER DPF Cleaner chemical package (2 x 1 L)

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, turning diameter: 500 mm, DMG CTX Beta 1250 TC 2009 Ijdpfx Agev N Hc Sjzotr

Condition: excellent (used), Year of construction: 2003, 8x Caviete Iodpfx Ash Rwlqegzstr Canister closure Year ca 2003

Condition: excellent (used), Dissolver Schneider SH 07 Vacuum dissolver Ex-protected version with wall scraper Drive power 13 kW power wall scraper 2,5 kW speed range 380-2000 1/min Mixing tank stainless steel double jacket 2 x 100 l usable capacity, 50 l capacity heating chamber Mixing tank stainless steel 1 x 200 l Very good condition, directly from production!!! Itsdpfeimgqmsx Agzsr

Condition: excellent (used), Brand: KENT Model: KGS-250AHD Type : Tangential Work surface 460x200 mm Longitudinal course 540 mm Cross course 260 mm Distance form center to table 490 mm Max. Weight on the table including magnetic chuck 103 for series 250 kg 150 for series 818 kg Slote in T 14x 1 mm/N Longitudinal table speed 5- 23 m/min Crank cords feed 1 gra 0,02 mm - 1 rev 4 mm Itodsh Ha Ipepfx Agzjr Automatic traerse feed per pass 0.1 -5.5 mm Automatic advance 50 Hz- 820 mm /min. - 60Hz 980 mm/min Wheel size 180 x 13 x 31. 75 mm Spindle speed 50 Hz 2850 rpm - 60 Hz 3480 rpm Upright crank 1 gra 0,01 mm - 1 rev 2 mm Automatic feed increment 0,002- 0,02 mm Spindle motor 2 x 2 HP X P Hoist motor NA kg x cm Hydraulic motor pump 1 X 6 HP X P Drain motor 1/8 X 2 HP X P Transverse agace engine 1/5 x 6 HP X P Machine height 1775 mm Machine dimension 3260 x 2460 mm Net weight 1300 kg Gross weight 1500 K

Condition: excellent (used), Year of construction: 2001, operating hours: 47,600 h, machine/vehicle number: 325, System: TX8H Spindle passage: 80 mm Turning length max: 750mm Turning diameter: 340mm Iodpfx Ash Dzqlogzetr Power: 22kw Number of tool holders: 12 Shaft diameter: 40 Powered tools in all positions X axis Z axis C axis Automatic tailstock chip conveyor

Year of construction: 2000, condition: defective spare-parts repository (used), Sell spare parts for a Trumpf TC 600L ram control new / used die acceptance punch holder drive motors this is only a small extract of what I have. Please just ask what you need. Itodpeffyg Hefx Agzor

Condition: new, CATALOGUE NUMBER M0261 TECHNICAL DATA number of spindles 21 distance between first and last drill 640mm distance between the centers of individual spindles 32mm max size of the workpiece 50 x 915 x 3000mm max drilling depth 65mm number of pneumatic clamps 2 height of the drill's working table 860mm max height of clamps above the table 70mm working pressure 6-7bar air consumption 10l/cycle engine power 1.5kW noise level 76.1dB speed 2800rpm dimensions length/width/height 1030/1030/1285mm weight 275kg PRODUCT FEATURES Main features of the machine: - Single-head drill for drilling in the range of 0 - 90 ° - Pneumatically adjustable head angle - Cast iron fences - Spindles adapted to quick connectors - Patented pneumatic material clamps - Cast iron work table - Quick and precise adjustment - Precise drilling - Italian production Standard equipment of the machine: - 2 aluminum rulers 1.5 m long (right and left) with two stoppers - 5 quick connectors - Wooden box securing the machine during transport. ADVANTAGES - vertical/horizontal/angle drilling - multi-spindle - new machine - CE certificate - solid - professional Iodpodpcflsfx Agzotr Net price: PLN 16,400 Net price: EUR 3,950 Net price calculated according to the exchange rate of PLN 4.15/EUR (with larger exchange rate fluctuations, the price may change) - we send machines to every corner of the country - possibility of leaving another machine in the settlement. The prices given are net prices. The net price given for international transactions, customers from the EU with an EU tax identification number. Before placing an order for a new product, please confirm the availability and current price.

Year of construction: 1993, condition: good (used), machine/vehicle number: 03.2370, Arthur Klink - internal broaching machine (WAG 748) Isdpfx Aocc D Ddsgzotr machine type: internal vertical hydraulic broaching machine manufacturer: Arthur Klink type: RISZ 10 x 1000 built in: 1993 stroke: 1000mm pulling force: 10.000KG working stations: 3 PCs drive: hydraulic system equipment: coolant system, magnetic chip conveyer remark: machine under power in stock the machine has an automatic workpiece loading system for 2 workpieces, ideal useable for high production Optional accessories available on request: tools, workpiece holder Information about us: we are specialized for second hand broaching machine and still have anytime about 80 pcs of used broaching machines in our stock, vertical and horizontal machines from 3000kg up 63.000kg pulling force and from 1000mm stroke up to 3500mm stroke.