Copy Lathe

WINTER KD-1500

Condition: used, Year of construction: 1988, Distance between centres 1200 mm Speed A) 70 - 380 U/min. turning speeds B) 380 - 2000 U/min weight 2,2 t Hodpfxsk Sat Do Ac Tjr +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: used, Planer-thicknesser STÖ310V, very good condition, 2.2 kW, 1800 mm table length, 310 mm table width, 4 knives, 300 kg Hsdox H Uc Tspfx Ac Ter Price changes reserved, errors and typographical mistakes excepted.

Condition: like new (used), functionality: fully functional, Weiler center lathe Model Condor 81 guidance and feed spindle lathe with 3-axis digital display from K&C, NEW Geometrically overhauled with inspection protocol for new machine tolerances Technical data: >> Machine No. 84-121 >> Center height 165 mm >> Center distance 750 mm >> Spindle speeds: from 22 to 2800 rpm >> Spindle bore 40 mm >> Short taper spindle head DIN 55027 size 5 with bayonet lock >> Tailstock MK 3 >> Feeds from 0.015 to 0.46 mm/rev >> Possible threads: metric, imperial, module, and diametral pitch >> Metric thread pitches from 0.18 to 28 mm >> Weight approx. 1100 kg >> Spindle brake switchable >> Length 1.83 m, Height 1.29 m, Depth 0.88 m Hsdpfx Aswrm Dtjc Tor Equipment and accessories: >> 3-axis digital display from K&C, new, 12 months manufacturer warranty with operating instructions Functions: switching mm/inch, coordinate selection ABS/INC, value halving, reference mark, tool programming for 200 pcs., taper calculation, radius/diameter, quick zeroing, count direction switching >> Collet chuck NEW, collets NEW from 3 to 26mm, increments of 1mm >> 160 mm three-jaw chuck with 2 sets of jaws NEW >> Multifix size B NEW with 3 piece steel holders >> Bed stop >> Electric chuck guard NEW >> Rear wall >> Operating manual >> Coolant device >> Machine feet About the machine: A Weiler Condor 81 guide and feed spindle lathe in a very good, geometrically overhauled condition is being offered. The guides are newly ground or newly scraped. Inspected according to test protocol. The accessories collets and chuck are new. For safety: The machine has a brake motor, electronic spindle guard and two emergency stops, making it an absolutely as-new lathe. Even at high speeds, the Weiler runs very smoothly. This newer generation of Weiler lathes is very user-friendly and allows surfaces as if ground to be produced. Take the opportunity to view this machine on site under power and convince yourself of its condition.

Condition: used, Robland NLX1700 panel saw and spindle moulder, very good condition, 2x3 kW, approx. 2000 mm cutting length, approx. 100 mm cutting height, 1700 mm sliding table length, approx. 450 kg Subject to price changes, errors, misprints and typographical mistakes excepted. Hodpfx Acjwzzh Ee Ter

Year of construction: 1988, condition: excellent (used), machine/vehicle number: 3284, (min.) material thickness: 0.65 mm (max.) material thickness: 2 mm Hjdpshbu E Hjfx Ac Tjr Technical Data: Width of film, max./min. 450/350 mm Forming area max. 430 x 160 mm Drawing depth max. negative/positive 6/20 mm (on request 22 mm negative) Top heater max. 10,15 kW Driving motors 3,0 kW Total connected load at 100 % duty cycle 12,7 kW Working air pressure 6 bar Air consumption (dependent on product) max. 1250 I/min Rate of water flow max. 1,0 m3/h COMPACT AND ROBUST - giving continuous high output. Easy and ergonomical operation (e.g. take- off height 1300 mm). QUICKLY CHANGEOVER - from 30° to 90° foil feed giving maximum material utilisation for both square and round lids. Heater changeover problem-free. PRECISION - The accuracy of the form table movement is guaranteed by linear guide bearings and hardened rods. The safe reliable guarantee for precision. OPTIMUM PUNCHING ACCURACY EVEN DURING MAXIMUM OUTPUT Cam controlled function sequence guarantees absolute precision with every cycle.

Condition: used, Year of construction: 2000, used CONDOR AC, partially overhauled Centre height: 165 mm Between centres: 750 mm Spindle bore: 40 mm Spindle speeds: 22–2,800 rpm, infinitely variable - Quick-change tool post size B - WEILER DZ-V digital readout - Hollow spindle stop - Fixed steady rest - 7 Multifix tool holders - Flat splash guard - Electrically interlocked chuck guard - Change gears and various soft jaws Hedpox E Um Nefx Ac Tor The machine is partially overhauled: - Bed slide: guideways re-coated and hand-scraped, gibs and lower guide strips adjusted - Cross slide measured and aligned on bed slide; cross slide dovetail guide newly scraped, gibs adjusted and scraped - Top slide newly scraped and gib matched - All measuring scales overhauled and cables replaced The machine is located in our showroom at 71334 Waiblingen-Beinstein and is immediately available. For details on equipment, please contact us.

Condition: used, OMA 600 Automatic wood lathe, with loader Hjdpferfh D Iox Ac Tsr

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, Universal Milling Machine Deckel FP4M with 3-Axis Active Digital Readout Heidenhain, Excellent Condition, CE Compliant!!! Technical Data: - Year of manufacture: 1992, Machine no. 2203-8449 - Fixed angle table - Spindle speed: 50 - 2500 rpm - Feed rate: 8 – 630 mm/min - Drive power: 3.7 / 4.4 kW - Spindle brake - Rapid traverse: 1300 mm/min - Travel (X/Y/Z): 500/400/400 mm - Vertical milling head traverseable on column Hsdpfxou Tuk Hj Ac Tor - Vertical and horizontal quill - SK40 taper - Vertical quill extendable by 90 mm - Hydraulic drawbar system - Approx. weight: 1600 kg Equipment and Accessories: - 3-axis active Heidenhain digital readout - Coolant system - Chip tray - Central electric lubrication - Operating manual, spare parts drawings About the Machine: For sale is a Deckel FP4M Universal Milling Machine (Active) in very good condition. The machine has minimal backlash, and all slides move smoothly. Even at maximum spindle speeds, the milling machine runs quietly. The machine features hydraulic tool clamping. The FP4M was only occasionally used in a state-run facility for training purposes. On this newer FP4 model, the feed rates are steplessly adjustable in all three axes, and each axis also features a rapid traverse. A major advantage is the active 3-axis digital readout. With the Heidenhain control, you can input measurements that the machine will approach automatically. Oil change has been performed; mechanically and electrically tested. The Heidenhain digital readout makes work easier and even more precise. Take advantage of the opportunity to inspect and test this machine under power on site.

Condition: as good as new (ex-display), DEMONSTRATION MACHINE For sale is an as-new Drechselmeister TWISTER XL woodturning lathe with a center distance of 800 mm. The demonstration machine is in its original condition, so you receive full warranty. Technical data - Center height: 250 mm - Swing over bed: 490 mm (up to 900 mm with optional outboard turning device!) - Center distance approx. 800 mm (extendable!) - Spindle fitting M33 x 3.5 with ASR (Euro) safety groove* - Spindle and tailstock taper: MK2 - Frequency inverter (2 belt speeds): - 60 – 1,350 rpm and 150 – 3,600 rpm - Quill travel 150 mm (with scale), trapezoidal-thread leadscrew - Motor: 2 HP - Weight: approx. 290 kg Hodstpxx Iepfx Ac Ter The machine is located in A-5431 Kuchl and can be inspected during our business hours at any time. Subject to prior sale! Shipping via freight forwarder: Austria: € 125 incl. VAT Germany: € 150 incl. VAT South Tyrol: € 180 incl. VAT Related terms: woodturning machine, lathe, turning lathe, wood lathe, woodturning, woodturning tools, wood spinning, turning, machine Reference: R-A0117

Condition: like new (used), Year of construction: 2002, Stainless Steel Shrink Wrapping Tunnel Hodpfx Acehqfnls Tsr Wrapping Tunnel for packing products with strech foil, Producer: Schur Machine Model: E 340 Year of production: 2002 Complete Stainless Steel Tunnel Opening dimensions 750 x 400 mm. That is not used long time, like new one!