Broach Cutters

WMT Model 2

Condition: new, Year of construction: 2025, Bending machine ZB 70/2 M - with foot pedal - with standard roller set - two driven shafts - mecanical adjusting of the center roller - working position horizontal and vertical - shafts are supported by conical bearings - slide bars on the slide -support are exchangeable - shaft diameter: 40 mm - roller diameter: - shaft rpm: 8,5 U/min Csdpfx Aot Hwfnsagorf - voltage: 400V 50Hz 3Ph - drivingmotor: 1,1 kW - adjusting way: 120 mm - weight: 400 kg - dimensions: 900x600x1100 mm

Condition: new, Year of construction: 2026, Curing ovens shown in the photos can vary in price depending on size, configuration, and optional features. 💡📏⚙️ At ROMER, we manufacture both standard models and fully bespoke solutions, tailored to your process requirements. 🏭✅ Tell us your part size, line capacity, curing profile, and available space - and we will propose the best setup and the options that actually improve daily performance. 🔥🎯 🧠📡 Control and monitoring Live process control for temperature, time, airflow, and modes - with alarms and saved recipes for repeatable cycles. 🔁✅ 🔥🧩 Heating module Fast heat-up and stable temperature thanks to efficient heating elements and quick energy transfer. ⚡🌡️ 🌀💨 Air circulation Uniform airflow reduces temperature differences for consistent coating quality. 🎯✅ 🧱❄️ Insulation and design Smart chamber construction minimizes heat loss - faster reaching setpoint, lower consumption. ♻️📉 🛡️⚠️ Safety and certification Sensors, interlocks, and protection logic increase safety and reliability. 🔒👷 ⚡💰 High efficiency Optimized heat transfer and reduced losses mean real operating savings. 📉🔥 ⏰🤖 Automatic start Programmable schedule - automatic preheating before the shift for smoother production starts. ⏱️✅ 🚪🔒 Self-latching doors + intelligent chimney Prevents accidental opening, chimney activates only when needed for safer operation. 🧯✅ 🌿🔋 ECO mode Low-energy standby when idle - fuel consumption reduction up to 20% (depending on process). 🌱📉 👀💡 View and lighting Inspection without opening the door - fewer temperature drops, easier supervision. ✨👁️ 🛤️🔥 Guide rails + automatic hood Heat hood runs only during loading to reduce temperature loss, automatic rail infeed improves ergonomics and loading speed. 🙌⚙️ Crodpfx Aofy T H Ieagof 🎛️🌡️ MULTI-ZONE HEAT Independent zone control for uniform curing of parts with different mass and geometry. 🧩✅ 🧠♨️ MTS system Heating elements mounted without thermal bridges - higher efficiency and faster time to set temperature. ⚡⏱️ 2-in-1 🧱↔️🧱 Split chamber Movable partition for two independent zones - drying and curing in one unit for maximum flexibility. 🚀🔁 🎚️🌀 VFD ventilation Variable fan speed based on chamber conditions - better control and lower electricity use. ⚙️💡

Condition: good (used), Inert gas welding machine with pulse function, pulse-arc welding system, MIG/MAG pulse welding system Csdsd I U Dwjpfx Aagerf -with: 3 hose packages (1x aluminum, 1x stainless steel, 1x steel) -Max. welding power: 330 A -Equipment: remote control connection, with removable wire feed, including ground cable, gas fitting -Wire feed: 4-roller drive -Cooling: Water-cooled -Dimensions: 655/900/H1490 mm -Weight: 160 kg

Condition: used, Year of construction: 2007, operating hours: 8,570 h, Equipment: all wheel drive, Liebherr Wheel Loader L 538 2 plus 1 VIN: VATZ0433 HZB019019 - No particulate filter - no exhaust gas treatment - no Adblue, etc. Year of manufacture: 2007 Operating hours: approx. 8350 Liebherr 4-cylinder in-line engine, water-cooled with turbocharging and intercooling, 142 hp Hydrostatic drive with 3 driving ranges: Speed range 1: 0-6.0 km/h, Speed range A1-2: 0-16.0 km/h, Speed range A1-3: 0-34.0 (40) km/h Machine width: 2500 mm, Height: 3.28 meters, Length: approx. 7000 mm * 3rd hydraulic control circuit (for silage block cutter, high-dump bucket, etc.) * Air conditioning * Fuel pre-filter * Driver's seat with pneumatic suspension * Ride dampener * Radio (function not tested) * Adjustable steering column * 2 work lights on the rear roof of the cab, LED * 4 work lights on the front roof of the cab Crsdpfx Aaezmprysgsf Road approval - 40 km/h - possible "Load-Sensing" axial piston variable displacement pump Permissible total weight: 16000 kg Brakes: Self-locking of the hydrostatic drive, acting on all 4 wheels, and additionally a hydraulic pump accumulator brake system with wet disc brakes located in the differential housing (two separate brake circuits) Machine width: 2500 mm Tires: 20.5 x 25 VA L3 - 50% Tires: 20.5 x 25 HA L3 - 50% Available at extra cost: * Quick coupler system Liebherr with hydraulic preparation: EUR 3,550.00 * 4-in-1 bucket (grapple-planer bucket) 2 cubic meters: EUR 3,950.00 * Volume bucket 3.5 cubic meters: EUR 3,990.00 * Bucket with retaining arm from 2.0 cubic meters to 3.5 cubic meters: EUR 3,660.00 * High-dump bucket from 2.5 to 5.0 cubic meters: from EUR 5,990.00 * Pallet fork 5 tons: from EUR 1,850.00 Also available with a used scale! Pfreundt WK 50 at a price of EUR 3,900.00 * All prices are net plus VAT or for export Sales only to commercial businesses or for export. Sale in "as is" condition. No guarantee or warranty. The stated mileage or operating hours are taken from the odometer or hour meter; we do not guarantee the accuracy of these figures. Subject to prior sale. The vehicle description does not constitute a binding offer, and the information provided is not to be regarded as guaranteed characteristics. The description and the information contained therein serve only for the general identification of the vehicle and do not constitute a warranty in the legal sense. The information does not claim to be complete. The information/descriptions and images are non-binding and do not constitute guaranteed characteristics. Only the specifications in the order confirmation and invoice apply. The seller assumes no liability/warranty. The advertisement may contain typographical and data transmission errors. The seller has not inspected the machine. Equipment should be checked separately. We will also accept your vehicle in part exchange. We are available to answer any further questions you may have. For our customers from abroad, we will prepare all customs and export documents for a smooth transfer abroad.

Condition: new, Year of construction: 2025, DESIGN VFDK powder booths are designed as an open wall cartridge filtered for manual powder coating use from one side. Powder booths are manufactured of externally powder coated sheet metal structure with castor wheels at the ground. The system consists of filtration system with automatic cleaning, ventilation and electrical control panel. Long lasting 100% polyester cartridge filters are used for high efficiency. WORKING PRINCIPLE Air flow generated by the extraction fan carries overspray powder coating particles to the filter unit and collects them at the outer surface of the filters. Filters are cleaned by pulse valve operated pull-reverse system during the operation. Powder coatings accumulated by this way at the ground of powder booth are collected manually in the drawer and can be reused after sieving. A hopper with vibrated sieve can be added optionally for powder recycling. ADVANTAGES Saves space in the workshop Easy and fast cleaning Made in Türkiye Csdpfevv H Hdex Aagorf CE Mark We offer the best technical solutions and competitive prices Contact us for more information and quotations

Condition: reconditioned (used), Year of construction: 2001, , Basic information Manufacturer TOS SVITAVY Type PKSN 32 B Category Multiripsaws Shipping Delivery to be agreed Terms Technical parameters Maximum Working Width #### mm 400 Machine with simultaneous transport and processing of the element The machine is CE marked Used machine Minimum Working Length #### mm 330 Engine power #### kW 55 Supply voltage #### V 380-400 Safety Guards Completely renovated Electrically Controlled Adjustments Technically efficient Perfect condition Crodpfx Aohixkheagsf Shank Diameter #### mm 70 With one tool spindle With noise reduction housing Cast iron body Feed Speed #### m / min 36 Spindle Lock Maximum cutting height #### mm 160 New Electricity New Mechanics New Pneumatics New Painting Noise Level #### Db 70 Right and Left Rotation Automatic adjustment Very good condition Cutting width #### mm 400 Machine width #### mm 1800 Machining Width Saw blade diameter #### mm 400 Machine weight #### kg 3500 Machine dimensions #### x #### x #### mm 1600x1800x2500 Cutting Height Machining height #### mm 160 With freely adjustable speed With the transport of the element in the machine

Condition: used, sheet width 3200 mm plate thickness 2,5 mm weight of the machine ca. 3,5 t Crodpfx Ajr Ngtfeagof Tools recentely grounded. Bending angle preselection via potentiometer

Condition: good (used), Year of construction: 2013, machine/vehicle number: 011-113081603, Offer 23370 Technical data: - max. load capacity 50 kg - face plate diameter 340 mm - Spindle shaft diameter 25 mm - Face plate can be swiveled by handwheel 0 - 90 ° - Rotation electr. infinitely variable 0.5 - 3 rpm - Right + left rotation - E. - foot switch - Earth cable - Welding current transmission approx. 350 A - Drive 230 V - Table height in horizontal position 760 mm - Space requirement approx. W 650 x H 760 x D 600 mm Crodpfx Ajq Ev R Ssagof - Weight approx. 150 kg

Condition: good (used), Year of construction: 1998, machine/vehicle number: A 2409, Offer 24410 Welding turntable and tilting table - three axes - welding positioner Technical data: - max. load capacity 250 kg - Face plate diameter 400 mm - min. Table height in horizontal position approx. 500 mm - Max. table height in horizontal position approx. 800 mm - Working height manually adjustable in 3 steps - Faceplate can be rotated motorized - Faceplate manually swiveling or tilting + height adjustment - Rotation electr. infinitely variable approx. 0.01 - 2.0 rpm - Right + left rotation - Welding current transmission approx. 500 A - Drive 400 V - Connected load 1.5 kW Cedeur Icuspfx Aagerf - Manual remote control for speed - E- foot switch - Space requirement approx. W 1100 x H 750 x D 700 mm - Weight approx. 500 kg

Condition: as good as new (ex-display), Carbide milling cutter Manufacturer: Prototyp H 4 1200 17 -10 -2 10 x 22 / R 2 Csdpfxsdwbklj Aagjrf 2 pieces available