2000 bar 34 l/min Electric HD Unit

Woma EG 250M-P20

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, total width: 2,400 mm, total length: 1,250 mm, total height: 1,150 mm, pressure: 2,000 bar, operating pressure: 2,000 bar, type of input current: AC, overall weight: 3,300 kg, rotational speed (max.): 1,500 rpm, power: 132 kW (179.47 HP), year of last overhaul: 2023, water pressure: 2,000 bar, pump capacity: 34 l/min, Equipment: type plate available, Stationary high-pressure pump unit Woma EG 250M-P20 on base frame. Similar but not Hammelmann, Kamat or Uraca. Pump type: 250M P20 Operating pressure: 2000 bar Flow rate: 34 l/min Drive speed: 1500 rpm Drive power: 132 kW With EMK electric motor, Kdodpfxjxmkiyj Aldop with pressure regulating valve, with safety valve. Dimensions LxWxH: approx. 1,250x2,400x1,150 mm Weight: approx. 3,300 kg Year of manufacture: 2013 Condition: In very good used condition. Pump has been serviced regularly, most recently at the end of November 2023. Documentation available.

Condition: good (used), Year of construction: 1990, machine/vehicle number: 5211, Offer 24289 Technical data: - max. cutting width 3060 mm - max. cutting capacity at 45 Kp/mm² 4 mm - Cutting angle 1.50 ° - Cutting gap - adjustment via adjusting screws - Number of hold-down devices 15 pcs - Stroke rate 23 to 43 /min - Front angle stop - Motorized backgauge position-controlled 15 - 850 mm - Cutting line lighting Ksdpst Ucgajfx Aldedp - E - foot switch - Drive 400 V / 7.5 kW - Space requirement approx. W 3900 x H 1600 x D 2400 mm - Weight approx. 4.5 t

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, total width: 2,400 mm, total length: 1,250 mm, total height: 1,150 mm, pressure: 2,000 bar, operating pressure: 2,000 bar, type of input current: AC, overall weight: 3,300 kg, rotational speed (max.): 1,500 rpm, power: 132 kW (179.47 HP), year of last overhaul: 2023, water pressure: 2,000 bar, pump capacity: 34 l/min, Equipment: type plate available, Stationary high-pressure pump unit Woma EG 250M-P20 on base frame. Similar but not Hammelmann, Kamat or Uraca. Pump type: 250M P20 Operating pressure: 2000 bar Flow rate: 34 l/min Drive speed: 1500 rpm Drive power: 132 kW With EMK electric motor, with pressure regulating valve, with safety valve. Kdsdpfoxmkh Aex Aldjp Dimensions LxWxH: approx. 1,250x2,400x1,150 mm Weight: approx. 3,300 kg Year of manufacture: 2013 Condition: In very good used condition. Pump has been serviced regularly, most recently at the end of November 2023. Documentation available.

Condition: used, Year of construction: 2021, operating hours: 3,372 h, travel distance X-axis: 730 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 470 mm, workpiece weight (max.): 200 kg, total height: 2,933 mm, total length: 2,984 mm, total width: 2,300 mm, overall weight: 6,780 kg, spindle speed (max.): 18,000 rpm, operating hours of spindle: 1,114 h, Equipment: documentation/manual, CNC 5-Axis Vertical Machining Centre CNC Control Mazatrol Smooth X Table size Ø 500 mm Table load 200 kg Kjdpfozf Hyrjx Aldjdp Number of pallets 1x Max. Workpiece 500x320 mm Movement X-axis 730 mm Movement Y-axis 450 mm Movement Z-axis 470 mm C-Axis (table rotation) 360° B-Axis travel ±110 (220) ° Spindle speed 18.000 R/min Spindle Taper HSK A-63 Spindle motor 15/11 kW Magazin capacity 48 If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Year of construction: 2008, condition: ready for operation (used), Operating pressure: 13bar, volume flow: 17.07m³/min, motor power: 90kW, motor speed: 3480rpm, weight: approx. 1750kg. The frequency converter of the machine is defective. An on-site inspection is possible. Kdodpsxmkc Tefx Aldjp

Year of construction: 2023, condition: like new (used), functionality: fully functional, Our compact extruder model EX20-25d Manufacturer: PMH GmbH Screw diameter [mm] 20 Screw length [L/D] 25 Screw speed [min-1] 10-192 Screw nitrided Torque 55Nm Drive Three-phase drive with frequency converter Drive power [kW] 1.1kW Barrel material: nitrided Electrical connection values 3 / N / PE Supply voltage [V] 400V at 50 Hz Control voltage [V] 24V Ceramic heating tapes [W] 1200W Number of heating tapes 3 Max. Output approx. 5kg/h Kjdsq R Tkwjpfx Aldodp Max. Processing temperature [°C] 300

Condition: used, System: used piston diaphragm pump / pump Type: HMD-G-50-500 Flow rate: 40.0 m3/h Pressure: 1,6 MPa Kedpfx Aledkdi Tedjdp

Condition: excellent (used), functionality: fully functional, Year of construction: 1994, machine/vehicle number: SN1744271, Overheadcrane ± 11.550 mm x 5.000 kg Kjdpfx Alov Ipvxjdjdp

Condition: like new (used), Year of construction: 2019, Arburg 1200 T 2000-800 (vertical machine with rotary table 1200mm) Clamping unit 2000T Table diameter: 1200mm Angle rotation: 180 degrees Clamping force: 200 tons Opening force max. kN/mm: 115/500 Platen daylight max. : 600 mm Injection unit Screw diameter: 45 mm Shot volume: 318 cm3 Shot weight: 291 g Injection pressure: 2470 bar 1. Model: T model 2. Machine type: 1200 T 2000 - 800 3. Plasticizing unit: Thermoplastics cylinder 45 mm, highly wear-resistant 4. Screw: Reinforced screw coupling for splined coupling geometry 5. Control system: SELOGICA ‘direct’ controller 6. Technology stage: Stage 2 servo-regulated with 2 control pumps 7. Rotary table: Advanced ergonomics special model, 2-station 180° forward/backward alternating 8. Nozzle: Open nozzle 45 mm with nozzle tip 9. In-mould needle nozzles: Electric & hydraulic control for needle nozzle 1, electric & pneumatic control for needle nozzle 2 10. Heating: Heater band for open nozzle, 9 electric heating control circuits for mould heating 11. Clamping platen: Mould mounting platen set, central diameter 125 mm 12. Blow unit: Mould blow unit with pressure reducer at station 1 13. Safety: Optical barrier at loading station, continuous oil cooling and filtration 14. Hopper: Adapter (extension) for feed hopper, machine delivered without 50 L hopper 15. Robot interface: Interface for robot system for station 2 & 3 (based on EM67/1) 16. Electric axes: Basic equipment for electric axes control 17. I/O: 4 programmable inputs/outputs on terminal rail 18. Sockets: Additional socket combination (1 CEE, 1 Schuko) 19. Interfaces: Temperature control device interface (REGLOPLAS), printer USB interface, Compact Flash, EUROMAP 65 chip card user authorisation 20. Acoustic alarm: Error alarm acoustic signal 21. Safety interlock: Interface for safety interlock of door (EUROMAP 73) 22. Cooling circuits: 3 regulated machine-related cooling circuits with flow indicator, 3 manually adjustable cooling circuits for second water manifold 23. Anti-corrosion: Anti-corrosion treatment for rotary table, sealing lip on outer diameter 24. Manual & labels: CD operating manual & spare parts list, Slovak language labels 25. Machine feet: Anti-vibration footplates 26. Other: Hydraulic ejector, external cycle start key, standard equipment packages, new ARBURG colour scheme 27. Display languages: IT/EN/SK Kjdpfswugczjx Aldjdp

Condition: used, We offer BOC Edwards Drystar GV600+EH4200 as a complete package. Kjdpfxjrfw Rbo Aldedp Only together, we do not sell GV600 or EH4200 separately. The pump set is used. If you are interested, just send us a message. We will then get back to you.