Workpartner

+GF+ GF WorkPartner 3

Condition: ready for operation (used), Year of construction: 2016, travel distance X-axis: 1,450 mm, travel distance Y-axis: 1,050 mm, travel distance Z-axis: 600 mm, table load: 600 kg, spindle speed (max.): 8,000 rpm, spindle motor power: 15,000 W, number of axes: 5, This 5s Okuma MU 6300 V L 5 AXIS was manufactured in 2016. It features a generous X-Axis travel of 1,450 mm and Y-Axis travel of 1,050 mm, providing ample workspace for various machining tasks. With a maximum workpiece diameter of 830 mm and a tool magazine capacity of 64 positions, consider the opportunity to buy this Okuma MU 6300 V L vertical machining centre. Contact us for further details. • A-axis rotation: +90° / -120° • C-axis rotation speed: 800 rpm • Distance table–spindle nose: 160–760 mm Gbedpfoyia Tlex Al Ueu • Rapid feed (all axes): 50 m/min • C-axis table diameter: 630 mm • Max workpiece size (D × H): 830 × 550 mm • Tool magazine: 64 positions (expandable to 166) Technical Specification Taper Size HSK 63

Year of construction: 2014, condition: ready for operation (used), Grinding diameter: 6mm-150mm, max. grinding stroke: 125mm, swing diameter over table/with cover: 600mm/260mm, travel X/Z: 500mm/170mm, rapid traverse: 10m/min, feed: 10m/min, resolution X/Z: 0.0001mm, workpiece spindle speed: 850rpm. Machine dimensions X/Y/Z: approx. 2550mm/3100mm/1800mm, weight: approx. 2600kg. Documentation available. An on-site inspection is possible. The machine is located in China. Gbedpfx Aexf Ikfol Uou

Condition: as good as new (ex-display), Year of construction: 2024, functionality: fully functional, Working area Grinding length: 250 mm Centre height: 100 mm Workpiece weight: 30 kg Z-axis: 350 mm Table adjustment: 8 ° degrees X-axis: 190 mm Grinding spindle Godpfjvz Snkex Al Usbu Grinding wheel diameter max.: 500 mm Grinding wheel width max.: 80 mm Grinding wheel bore: 127 (203) Grinding wheel motor power: 5.5 kW Peripheral speed: 50 m/s Grinding wheel protection cover: D500 x 80mm Workpiece spindle Speed: 1 - 2,000 rpm Workpiece spindle mount: MK4 Tailstock Tailstock quill mount: MK3 Tailstock quill stroke length: 30 mm Cylinder fine adjustment range: ± 0.04 Equipment Paper belt filter system Rinse gun Mechanical fume extraction

Condition: new, Year of construction: 2025, Ref. -No.: 10465 Manufacturer: IGREK Type: FR 1000 T Year of construction: 2025 Type of control: CNC-Steuerung Control: Siemens / Heidenhain Storage location: Istanbul Country of origin: Türkiye X-Travel: 1350 mm Y-Travel: 1500 mm Z-Travel: 900 mm B-Axis: ° C-Axis: 360 ° Spindle Taper: HSK-T100 Turntable diameter: 1000 mm Table Load: 2000 kg Tool Piece Magazine With: 48 Pcs./pcs. Spindle Speed: 15000 RPM Rapid Travel X/Y/Z: 48 mm / min Gbjdpfxexmd S Io Al Uou Drive Capacity - Spindle Motor: 35 kW Max Spindle Torque: 220 Nm Machine length: 3200 mm Machine width: 6400 mm Machine Height: 4050 mm Weight Of The Machine Ca.: 40 t Further information: IGREK FR 1000 T – Compact precision for demanding applications The IGREK FR 1000 T is a CNC turning and milling center with 5-axis simultaneous machining that combines state-of-the-art technology in a compact design. Manufactured in 2024, this machine is ready for immediate use and is ideal for the precise machining of medium-sized workpieces in a wide range of industries. Key features: Compact performance: Traverse paths of 1,350 mm (X), 1,500 mm (Y) and 900 mm (Z) and a table load capacity of up to 2,000 kg provide optimal conditions for flexible applications. 5-axis simultaneous machining: With a B-axis (°/°) and a C-axis (360°), even complex geometries can be precisely machined. High-performance spindle: The spindle achieves speeds of up to 15,000 rpm, a maximum torque of 220 Nm and a drive power of 35 kW – ideal for demanding milling work. Extended capacity: A tool magazine with 48 tool spaces and the HSK-T100 holder enable quick changes and efficient processes. Top speed: Rapid feed speeds of 48 m/min on all axes minimize machining times. Technical data at a glance: Traverse paths: X 1,350 mm / Y 1,500 mm / Z 900 mm Rotary table diameter: 1,000 mm Max. table load: 2,000 kg Spindle power: 35 kW Spindle speed: up to 15,000 rpm Machine dimensions (LxWxH): 3,200 x 6,400 x 4,050 mm Weight: approx. 40 tons Additional advantages: Thanks to the latest control systems (Siemens or Heidenhain) and a robust machine concept, the IGREK FR 1000 T is suitable for both single-part and series production. The manufacturer offers international service and comprehensive warranties. Discover the IGREK FR 1000 T as your reliable partner for precise and efficient manufacturing – now available from stock. Contact us for more information!

Condition: excellent (used), Year of construction: 2011, operating hours: 4,450 h, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 240 mm, travel distance Z-axis: 360 mm, feed rate X-axis: 60 m/min, feed rate Y-axis: 60 m/min, feed rate Z-axis: 60 m/min, controller manufacturer: Heidenhain, controller model: iTNC530i, table load: 25 kg, rotational speed (min.): 250 rpm, spindle speed (max.): 42,000 rpm, operating hours of spindle: 4,400 h, coolant supply: 4 bar, number of spindles: 1, number of slots in tool magazine: 66, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, HSC milling machine HSM 400 U LP Milling spindle Steptec 42,000 rpm, 2 years old ITC & ITCX 5-axis thermal control Heidenhain TNC 530i control system Tool magazine 66X HSK40E Gedpozzknxefx Al Usbu Rotary table ITS 148 Minimum quantity lubrication Oil-mist extraction system Chip conveyor, manufacturer Phoenix Metall Water/water heat exchanger Measuring probe, infrared, manufacturer M&H 40.01 TX/RX Pallet magazine, 20 x ITS 148 Coolant and air supply from outside

Condition: used, Year of construction: 2007, MAZAK TURNING CENTRE TYPE INTEGREX 200 IV S - 1000 mm The machine is supplied in standard configuration and equipped with the following options: - Through‑spindle coolant 15 bar - Synchronized tapping with milling spindle - Cylindrical interpolation and polar coordinates - 40‑tool magazine Capto C6 - Preparation for visual tool (visual tool probe) - Form/geometry compensation for rotary axes - 3D coordinate conversion - Management of rapid traverses - Preparation for flash tool (tool‑change flash tooling) - Simultaneous 5‑axis functions - Tool pivot point management - 5‑axis tool radius compensation - Part catcher (automatic part collector) - Double clamp pressure on the secondary spindle - Overload detector Gbedozuy Tdopfx Al Usu Maximum swing 660mm Swing over cross slide 660mm Swing during Y-axis process 660 to 500mm Maximum machining diameter 660mm Through-hole diameter 76mm

Condition: good (used), Year of construction: 2011, Maximum grinding diameter 290mm, Gbedpfx Alotudfds Uju maximum grinding length 800mm, grinding wheel size 290mm x 63mm bore. Control Fanuc 21i-TB, workhead speed 1,000rpm, spindle power 5Kw, table swivel +6/-3.5 degrees, workhead swivel angle 0-90 degrees. internal spindle motor 1.5kw. fitted with coolant.

Condition: excellent (used), Number of paletts 18 Carrying force 25 kg Gbodpfx Aoilp Eusl Uou Max. height of workpiece 350 mm Max. diameter of workpiece 230 mm Misc. accessories MARCELS MASCHINEN AG

Condition: used, Year of construction: 2007, turning length 2500 mm control Sinumerik 840 D spindle head A 11 tool numbers 48 swing diameter over bed slide 750 mm swing over bed 780 mm c-axis 0,1-30 1/min diameter of quill 160 mm taper bore MK 5 tool length - max. 500 mm weight of tools max. 15 kg weight of the machine ca. 27 t dimensions of the machine ca. 8,4 x 4,0 x 2,5 m Technical details: Nominal turning length: 2,500 mm Swing diameter over bed slide: 750 mm Swing diameter over bed: 780 mm Working height: 1,300 mm Spindle head to DIN 55026: A 11 Bore through: 123 mm Diameter in front bearing: 200 mm Oriented spindle stop: 0-359 degrees Drive power at 100/60 % duty cycle: 37/45 kW Total speed range: 10-2,500 1/min Godpfswwaruex Al Uebu Number of speed ranges: 2 Speed range I: 10-775 1/min Speed range II: 20-2,500 1/min Max. torque at 60 % duty cycle: 2,500 rpm. Torque at 60 % ED: 2,083 Nm (up to 186 rpm)

Condition: used, Year of construction: 2010, grinding diameter 350 mm grinding length 1000 mm centre height 175 mm Control Fanuc 310is Completely machanically overhauled with grinding process and setup of one part. Gbjdpfx Asvdk N Esl Usu Original photo taken on the EMO 2010. CNC control GE Fanuc 310is Hand panel for CNC control GE Fanuc Wenger loader optional Turned part with automatic indexing 1° Grinding head UR 1-2-3 Grinding wheel equipment left 500 x 80 mm Grinding wheel equipment right 400 x 63 mm Operating unit for one high-speed internal grinding spindle MFV / MFZ High-frequency internal grinding spindle MFN 1090 Coolant supply through the workpiece spindle Dressing unit on the upper table Swivelling holder for PCD diamond plates Basic module for KEL-TOUCH gate sensor and KEL-BALANCE balancing devices KEL-TOUCH lead sensor for universal grinding head variants R / RS / UR / URS KEL-TOUCH on the workpiece headstock for internal and external grinding Preparations for Movomatic ESZ 400 or Marposs P7 ME measuring controls Preparation for external filters Cooling lubricant switch-off for table devices Full casing emulsion Emulsion sanding mist extraction system Maintenance unit for additional pneumatic functions Preparation for KEL-VITA gantry loader KEL-POS, MOVOMATIC: C25 measuring probe Hydraulic preparation for arobo bezel