Clamping cube

1230 x 1230 mm

Condition: used, Year of construction: 2014, JÄCKEL MIG 405 output 400 AP +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. Fjdpfx Ajhl Nndjh Uogi +++++

Condition: good (used), TMZ F-102 76x106cm die cutting machine The machine is fully operational, ready to work. Made in Spain. Format 760x1060mm Weight 3600kg Power supply 380V Installed power 4.5 kW Equipment: – pneumatic clutch – control panel – mounting frame Fgjdpfx Ahewxtcpe Uoi – 3 operating modes: continuous, with time delay, manual – central lubrication – safety guards – operating tools – sheet metal for pressure

Condition: new, 30000 kg length 6000 mm width 2500 mm height 823 mm lenkbar Fgodpfx Ahofrzvzj Uei lenkbar size of tyres 425 x 260 / 2-fach mm weight of the machine ca. 3,2 t dimensions of the machine ca. 7,9 x 2,5 x 0,823 mm Heavy load trailer with - double steering - small turning circle - Tilt-proof due to steering angle limitation - very robust, thus low maintenance - Reversible drawbar, Length 1320mm - impregnated wood support. Would you like other loads and dimensions? Please contact us.

Condition: used, Year of construction: 2009, Spindle head diameter: 75 mm Spindle taper: Morse 5 Spindle stroke: 350 mm Min./max. overhang from the surface of the casing to the spindle axis: 1170/2070 mm Min./max. radius at the extreme positions of the spindle: 1370/2270 mm Min./max. distance of the spindle head in the vertical position (with the spindle retracted) from the floor: 305/1555 mm Min./max. distance of the spindle axis in the horizontal position from the floor: 295/2725 mm Vertical adjustment of the arms (stroke): 1250 mm Horizontal adjustment of the arms (travel): 900 mm Arm rotation: 360° Headstock rotation: 360° Headstock rotation from the horizontal position up/down: 90° / 90° Slide travel along the bed (extended): 2500 mm Fgodpfx Asvwbcceh Uoi Shell diameter: 400 mm

Year of construction: 1981, condition: used, machine/vehicle number: 77-8101, Lg-Nr. 01501, Technical data: - Drilling capacity in steel 28 mm - Thread cutting device - Drilling spindle holder MK 3 - Drilling spindle stroke 160 mm - Table dimension approx. 750 x 500 mm - projection up to approx. 620 mm - Vertical stroke of the boom 600 mm - column diameter 250 mm - spindle speeds in 12 switching steps 80 - 2800 rpm - 3 feeds 0,1 + 0,15 + 0,25 mm/rev - drilling spindle drive 400 V / 5,5 kW Fgjdpfxeb Ennks Ah Uoi - cooling device - space requirement approx. W 1100 x H 1550 - 2150 x D 950 mm - Weight approx. 1200 kg - Instruction manual

Condition: good (used), Clamping plate with T-slots, plate field, welding table, welding table, plate boring machine, T-slot plate, Fgedpfx Aekrgiqeh Uei -T-slot plate: clamping plate with solid base frame -Length: 3000 mm -Width: 2000 mm -Plate: with support ribs -Groove width: 28 mm -Groove spacing: 200 mm -Dimensions total: 3000/2000/H800 mm -Weight: 4500 kg

Condition: good (used), Cast iron marble plate Length: 3500 mm Width: 2500 mm Fgodpsid R Srefx Ah Uei Thickness: 300 mm Height on feet: 900 mm Delivered with 12 leveling feet Weight : 6,3 T

Condition: used, Tool presetter GILDEMEISTER-DE VLIEG Type EGS 5045 / Microset DPS 100 Serial No. 83-10-102 Year of construction 2002 Travel distance X-axis approx. 400 mm Travel distance Z-axis approx. 400 mm Fsdpfx Ajhbal Doh Uegi Tool holder in mounted rotary table: Ø 50 mm Pitch circle diameter of the tool holders in the mounted rotary table Ø 340 mm Inner cone in the mounted rotary table Ø 245 mm Tool mounting plate as rotary table with 8 mounting holes Ø 50 mm Centering diameter of the mounted tool holder plate: Ø 102 mm Swivel-mounted flange holder with centering diameter: Ø 102 mm Swivel-mounted flange holder with outer diameter: Ø 155 mm Swivel-mounted flange holder with 3x M10 mounting holes, bolt circle: Ø 130 mm Mains connection 230 Volt, 50 Hz - Microset DPS 100 measuring electronics - Rotary table with 8 tool positions - Interfaces: 1x RS232, 2x measuring system (X/Z) - Profile projector with screen Ø 100 mm magnification 20x and two circular screens - Fixed focusing screen with crosshairs - Axis movement via manual quick adjustment with pneumatic clamping - Fine adjustment via hand wheels - Rotatable rotary table with pneumatic clamping - Metal substructure with 3 drawers Space requirement L x W x H 1100 x 1000 x 800 mm Weight 400 kg good condition

Condition: new, table height: 650 - 1050messurements (LxWxH): 1950 x 950 x 650 bis 1050table width: 950table length: 1950weight approx.: 475This enables the user to flexibly adjust the height of the work surface to the respective requirements in order to improve economy and ergonomics. The standard height adjustment is carried out by manual hydraulics in the range of 650 - 1050 mm (higher or lower on request). Like the SST fix series, the worktop also has a 100 x100mm Ø 28 grid. Used in combination with processing machines, testing or post-processing devices (deburring, marking, testing to the height of the clamping table of the machine can be adjusted. The table systems can be easily changed by means of a lifting truck. These portable systems, with the different fastening and securing options for the maintenance of injection molding and die-casting tools have already been proven. After removal from the machine, the tools can be safely serviced on site and taken for repairs for maintenance Table 2 below gives an overview of the available standard models. For more information please follow this link: Fgsdpfx Ahsfk E D Ae Uoi

Condition: ready for operation (used), Outer Diameter: 300 mm Fgjdpfxsd H I Syj Ah Uei boring: 90 mm height: 110 mm weight: approx. 59 kg