Used 3D Printers for sale (153)

Condition: like new (used), Year of construction: 2024, operating hours: 200 h, Functionality: fully functional, total length: 2,700 mm, type of input current: three-phase, input voltage: 400 V, I offer a new machine for large format thermoplastic solutions for 3D printing. Control: Stäubli / Cead - Profinet full controll Robot: Stäubli TX200L - reach 2700 mm, load capacity 100kg Extruder: Cead E25 with a flow rate of 12kg/h Dryer VIZMATEC 100l plus automatic dosing for continuous production. G-CODE / NC code is used to generate the robot trajectory. Deln Uourvzrj Rc Teut

Condition: ready for operation (used), Year of construction: 2023, General Data Measurements width 610 mm Measurements depth 650 mm Measurements height 1200 mm Additional Equipment Dusln Uev H E N Se Rc Tot Inert Gas Control System: Yes This SINTERIT lisa x was manufactured in 2023. A compact and efficient plastic 3D printer, it offers advanced printing capabilities suitable for various applications. Ideal for small to medium-sized projects requiring precision and reliability. Consider the opportunity to buy this SINTERIT lisa x plastic 3D printer. Contact us for more information. Application Types 3D Printing

Condition: excellent (used), Year of construction: 2022, operating hours: 1,500 h, Functionality: fully functional, machine/vehicle number: 3PL01PUS5THC1K0001, total length: 2,040 mm, total height: 1,480 mm, total width: 850 mm, type of input current: DC, overall weight: 360 kg, input voltage: 220 V, input current: 32 A, laser power: 30 W, ambient temperature (min.): 16 °C, ambient temperature (max.): 27 °C, worktable width: 230 mm, worktable length: 230 mm, XYZprinting MfgPro230 xS – Used SLS System with Comprehensive Accessory Package For sale is a fully functional XYZprinting MfgPro230 xS SLS system from 2022. The machine was professionally serviced at the end of 2024, during which all wear parts were replaced. Since then, the printer has only logged a few operating hours. Duoln U Rjv S I Ihjc Tot Machine specifications: - Year of manufacture: 2022 - Operating hours: approx. 1500 h - Printing process: SLS (Selective Laser Sintering) - Build volume: 230 × 230 × 230 mm - Materials: PA12, PA11, TPU, and other SLS-compatible powders - Optimized print profile for AM Polymers PA12 White available – for the best print results with this high-quality powder Scope of delivery – Complete package for efficient SLS production In addition to the machine, the package includes the following extensive accessories: ✔ Sinterit ATEX vacuum cleaner including powder separator ✔ Powder handling station including separator for efficient powder management ✔ Blasting cabinet for component post-processing ✔ N2 generator with tank for controlled nitrogen atmosphere ✔ Voxel Dance Additive Premium Sintering – Lifetime license for professional slicing software ✔ Complete accessories for powder storage and rework Condition & Maintenance ✅ The machine was covered by a maintenance contract until the end of 2024 and regularly serviced. ✅ Location: 71154 Nufringen, Germany 🚚 Shipping via freight forwarder required 📞 Interested? Contact us for more details or to schedule a viewing!

Condition: excellent (used), Functionality: fully functional, total length: 775 mm, total height: 1,135 mm, type of input current: AC, overall weight: 110 kg, 3NTR A2 printer, in good working order. We sell because it is not used. Complete with trolley and Hepa filter Motors, nozzles and electrical wiring recently replaced. Additional spare parts and proprietary material (around 8kg) included in the offer Duolnov Td Nkj U Rc Tot 3NTR A2 3D printing machine, in good working order. New engines, cables and hot ends. Trolley and Hepa filter. Included in the offer additional spare parts and proprietary material (around 8KG)

Condition: excellent (used), ProJet 3000 HD 3D Printer Here we offer you an untested ProJet 3D Printer. The ProJetTM HD 3000 prints precise plastic parts for use in functional testing, communication models, rapid manufacturing, rapid tooling and more. Duoln U Rcjg I Iv Re Tst With features such as a wide material selection, multiple resolution modes and ease of use, this office-friendly 3D printer accelerates and maximizes your return on investment (ROI). Print Modes HD - High Definition UHD - Ultra High Definition Net build volume (xyz) HD Mode 298 x 185 x 203 mm UHD Mode 127 x 178 x 152 mm XHD Mode n/a Resolution: HD mode 375 x 375 x 790 DPI (xyz); 32μ layer thickness. UHD mode 750 x 750 x 890 DPI (xyz); 29μ layer thickness XHD mode n/a Accuracy (typical) 0.1 - 0.2 % of part dimension Accuracy depends on build parameters, part geometry, part placement and post-processor settings Email Notification: No Build Materials: VisiJet® EX200 build material Solid material with high durability. VisiJet® SR200 Construction Material Inexpensive multi-purpose material. Available in natural, blue or grey. VisiJet® HR200 construction material Available in blue, specially developed for investment casting applications. Backing material: VisiJet® S100 support material: non-toxic wax material for melting supports without hand application. Power supply: 100-127 VAC, 50/60 Hz, single phase, 15A Dimensions (LxWxH) printer without packaging 737 x 1215 x 1504 mm Weight: Printer without packaging

Condition: ready for operation (used), Year of construction: 2016, operating hours: 1,366 h, General Data Dujln U Rcsurz Ikj Tet Measurements width 1397 mm Measurements depth 927 mm Measurements height 1314 mm Machine weight 325 kg Additional Equipment Printing Modes: HD + UHD RESOLUTION: HD: 800X900X790 DPI (32ΜM LAYERS), UHD: 1600X900X790 DPI (32ΜM LAYERS) This 3D printer was manufactured in 2016. The 3DSYSTEMS ProJet 2500 Plus offers high-definition printing modes, HD and UHD, with resolutions up to 1600x900x790 DPI. It supports a substantial print volume and has a robust frame size of 1397x927x1314mm, weighing 325kg. Ideal for detailed and precise printing tasks, the 3DSYSTEMS ProJet 2500 Plus machine we have for sale is a reliable choice for professional use. Contact us for more information. Application Types 3D Printing

Condition: excellent (used), Stratasys 3D Printer Dimension Here we offer you a Stratasys 3D Printer Dimension. Stratasys Dimension 3D Printer The Dimension 3D printer is part of the Design Series from Stratasys. Manufacturer: Stratasys Type / Printing Technology: FDM (Fused Deposition Modeling) Build volume: 20.3 x 20.3 x 30.5 cm Printable material / filaments: original ABSplus spools or also other ABS or Hips foreign material Dimensions and weight: 68.6 x 91.4 x 104.1 cm; 127 kg Build platform: plastic; reusable Software / file types / operating systems: CatalystEX / STL / Windows 10, Windows 8.1, Windows 8, Windows 7, Windows Vista Special feature: ideal for complex 3D models with a resolution of 0.178 mm or even 0.25 mm layer thickness. Type: Dimension Condition: used / used Scope of delivery: (See picture) (Changes and errors in the technical data, specifications are reserved!) Djln Ujg Nt Tye Rc Tjut Further questions we can answer gladly on the phone for you.

Condition: excellent (used), Here we offer you an Objet Stratasys 3D printer. The Objet Connex 500 is the pioneering multi-material 3D printer from Objet. With a large footprint of 500 x 400 x 200 mm, designers and engineers can quickly prototype, to more closely simulate the intended end product than any other technology. What is unique about the Objet Connex? With Objet's patented simultaneous multi-material molding technology, the Objet Connex 500 can produce print models from up to 14 different materials in a single print job. The system is ideal for designers and engineers who want to effectively highlight the different material components in complex or composite products. Freedom to choose your own materials The Objet Connex500 offers an unmatched selection of over 60 materials, including up to 51 Digital Materials ™. It allows users to simulate various mechanical and physical properties, from rubber to rigid, opaque to transparent; and standard to ABS engineering plastics. Outstanding productivity Deln U Rcsg S A N Te Teut The Objet Connex 500 offers: - Multi-material models - no more designing, printing and gluing together separate model elements. - Different parts. Different materials. Same tray - saves time and serves multiple needs at the same time. - Excellent 16 micron high resolution printing accuracy - 600 DPI X & Y resolution - Thin walls

Condition: excellent (used), Eos Type: EOS M270 Metal laser sintering system Laser sintering system 200 Watt Yb fiber laser Material processed with the system: Tungsten Laser hours: 8018 Usable build volume: 250 mm x 250 mm x 215 mm (incl. build platform) Layer thickness: 20 μm or 40 μm Precision optics: F-theta lens, high-speed scanner System was upgraded to Scanlab hurrySCAN 30 for a more precise print image Focus diameter 100 μm Dimensions (W x D x H) System: 2,000 mm x 1,050 mm x 1,940 mm Weight approx. 1,130 kg For further technical information, please contact the manufacturer. Scope of delivery: Eos M270, cooler and software Dslnsu Ebpce U Rc Teut Condition: used (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have over the phone.

Condition: excellent (used), Stratasys 3D printer Dimensio elite Here we offer you a Stratasys 3D printer Dimensio elite. Stratasys 3D printer Dimensio elite The Dimension Elite 3D printer is part of the Design Series from Stratasys. The Dimension Elite printer is ideal for printing 3D prototypes, and modeling functional components, such as medical devices, mobile electronic equipment or precision instruments. With a simple click on "Print", the CAD file is prepared and the printing process is started. After simply removing the soluble support material, a precise and detailed component is revealed. Manufacturer: Stratasys Type: Professional Material(s): ABS Technology: Melt layering Assembly: Plug&Play Size: 686x914x1041 Weight (kg): 136 Nozzle opening (mm): - Coating thickness (µm): 178 Speed (mm/s): - Precision (µm): - Filament thickness (mm) : - Maximum build volume (mm): 203x203x305 File format: .stl Software: CatalystEX Software Connections: Ethernet Operating system: Windows XP, Windows 7 Dueljk E H Iusn U Rc Tet Required power: 100 to 120 VAC, 60 Hz, at least 15 A in a dedicated circuit or 220 to 240 VAC, 50/60 Hz, at least 7 A in a dedicated circuit Type: Dimensio elite Condition: used / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: used, Objet Stratasys Objet30 Prime V3 + cleaning glovebox Technical data: Machine: 82.5 × 62 × 59 cm; 106 kg Build platform: 294× 192× 148.5 mm Layer thickness: 28 µm; 16 µm for VeroClear material Accuracy: 0.1 mm, may vary depending on model geometry, size, orientation, material and post-processing method Model materials: Transparent, solid (VeroClear) Solid, opaque, white (VeroWhitePlus) Solid, opaque, blue (VeroBlue) Solid, opaque, black (VeroBlack) Solid, opaque, gray (VeroGray) Polypropylene-like (DurusWhite and Rigur) Heat-resistant (RGD525) Resolution: X-axis: 600 dpi; Y-axis: 600 dpi; Z-axis: 1600 dpi Manufacturer: Objet/Stratasys Type: Objet30 Pro Condition: gebraucht / used Dusln U Rcery Uhhj Tet Scope of delivery: (See pictures) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone. Written order possible by email or fax

Condition: excellent (used), Eos Metal Laser Sintering System Here we offer an Eos Metal Laser Sintering System. Material processed with the system: Gold Laser type: Yb-fibre laser, 100 W Scan speed: up to 7.0 m/s Deln U Rsqzgvhoc Tsut Construction volume: Ø80mm x 100mm Dimensions (W x D x H) system: 800 mm x 950 mm x 1,850 mm Installation area: 1000mm x 3000mm x 2500mm Weight approx. 580 kg Software: EOS RP Tools, Offline PSW CAD interface: STL Network: Ethernet Type: EOS M080 External gas connection (nitrogen) Power consumption maximum 2.3 kW 13A Scope of delivery: See pictures Condition: used (Changes and errors in the technical data, information are reserved!) We will be happy to answer any further questions you may have over the phone.

Condition: good (used), German reprap (innovatiq) Type: German RepRap X500 RepRap 3D printer Technical Data: Material: Composite materials (carbon fiber, glass, Kevlar) Technology: Fused deposition molding (FDM/FFF) Dimension: 1120 × 850 × 955 mm Weight: 185 kg Nozzle diameter: 0.4 Ø mm Printing speed: 10 - 150 mm/s mm/sec Precision XY: +/- 0.05 mm µm Max. Volume: 500 × 400 × 450 mm Power: 230 V AC 50Hz 10 A 2.3 kW Further features: Touchscreen Condition: second-hand / used Scope of delivery: (see pictures) + filament rolls (PETG) and printing accessories Djleuif Izsn U Rc Tsut Only PC (WIN 7) available! Screen and input devices not! License for current software to operate the printer must be purchased by the customer (approx. 200 Euro for Simplify3D)! (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), EOS Type: P385 similar to a P390 Laser has been renewed and is unused! Plastic laser sintering system for the direct production of series, spare parts, functional prototypes and samples for investment casting or vacuum casting. Machine description: Condition of the machine/system: Dimensions: System P385 (dimensions 2000x1220x1250) Cooler (dimensions 930x610x600) Control panel (dimensions 1580x950x800) Control cabinet (dimensions 2100x610x950) Technical data: Effective construction volume 340 mm x 340 mm x 620 mm Construction speed (depending on material) up to 31 mm/h Layer thickness (depending on material) 0.06 – 0.10 – 0.12 – 0.15 – 0.18 mm Doleubxkmjn U Rc Tout Support structure not required Laser type CO 2 , 50 W Precision optics F-Theta lens Scan speed up to 8 m/s Power supply 32 A Maximum energy consumption 10 kW / typically 2.4 kW Integrated nitrogen generator (optional) Compressed air supply at least 5,000 hPa; 6 m³/h Voltage: 3/N/PE/ 400 V AC Frequency: 50/60 Hz Modified surface module from a heated nitrogen flood Connection value: 12 kW Rated short-circuit current: 5 kA Fuse: 3x 32 A Current consumption: 18 A Max. laser power (10.6µm) 100 W Laser class open 4 Laser class closed 1 Weight: approx. 1,060 kg Condition: used Scope of delivery: (See image) (Changes and errors in the technical data, information is subject to change!) We will be happy to answer any further questions you may have over the phone.

Condition: excellent (used), 3D systems Here we offer you a 3D printer. Solid-state Nd: YVO4with triple frequency Wavelength: 354.7nm Duolnjnkalgj U Rc Tot Nominal power at the laser head: 1450 mW (1000mW at the resin surface under standard conditions) Zaphyr TM coating system: Process: Replaceable coating agent Adjustment: Self-leveling and self-correcting Production layer: Minimum 0.05mm Maximum 0.15mm ProScan™ scanner Edge detection (diameter at 1/e2): Nominal in standard mode 0.13mm Detection of large lines Nominal: 0.76mm Maximum drawing speed Edge detection: 3.5m/sec. Detection of large lines: 25m/sec. Build volume capacity: RDM 750F: 650mm x 750mm x 550mm; 414l Maximum part weight: 75kg Power supply: 200-240VAC (alternating current), 50/60Hz single-phase, 30A Ambient conditions Temperature range: 20-26°C Max. permissible fluctuation: 1°C per hour Relative humidity: 20-50%, non-condensing Space requirement: Size (WxDxH), unpacked: 1260mm x 2200mm x 2280mm Weight packed (no RDM): 1590kg Type: iPro 8000 Condition: used Scope of delivery: (See pictures) (Changes and errors in the technical data, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: excellent (used), Eos Metal Laser Sintering System Here we offer an Eos Metal Laser Sintering System. Material processed with the system: Gold Deln U Rcsqy Edyj Tsut Laser type: Yb-fibre laser, 100 W Scan speed: up to 7.0 m/s Construction volume: Ø80mm x 100mm Dimensions (W x D x H) system: 800 mm x 950 mm x 1,850 mm Installation area: 1000mm x 3000mm x 2500mm Weight approx. 580 kg Software: EOS RP Tools, Offline PSW CAD interface: STL Network: Ethernet Type: EOS M080 External gas connection (nitrogen) Power consumption maximum 2.3 kW 13A Scope of delivery: See pictures Condition: used (Changes and errors in the technical data, information are reserved!) We will be happy to answer any further questions you may have over the phone.

Condition: used, Formlabs Djln U Rot E Splec Teut Type: Form 3BL Technical specifications: 3D printing technology Low Force Stereolithography (LFS) Minimum dimensions for easy access (W × D × H) 90 × 96 × 104 cm Printer dimensions (W × D × H) 77 × 52 × 74 cm Printer weight 54.4 kg Build volume (W × D × H) 33.5 × 20 × 30 cm Layer thickness (vertical resolution) 25-300 microns XY resolution 25 microns Laser spot size (FWHM) 85 microns Resin cartridges 2 Resin dispensing system Automated Biocompatible materials: Yes Support structures Automatically generated Light touch removal Ambient temperature 18-28 °C Low Ambient humidity Operating temperature Automatically heats to 35°C Temperature control Air-heated pressure chamber Power requirement: 100-240 VAC Maximum 8.5 A 50/60 Hz 650 W Laser specifications IEC 60825-1:2014 | EN 60825-1:2014 Class 1 laser product 2 Light Processing Units (LPUs) Each Light Processing Unit (LPU) contains: Violet 405 nm laser Maximum 250 mW Emissions Information The Form 3BL is a Class 1 laser product. Accessible Emissions are within Class 1 limits. Connectivity Wi-Fi : 2.4 GHz, 5 GHz Ethernet : 1000 Mbit USB : 2.0 WLAN connectivity Protocol: IEEE 802.11 b/g/n Frequency: 2.4 GHz, 5 GHz Supported security protocol: WPA/WPA2 Ethernet connectivity LAN port RJ-45 Ethernet (10BASE-T/100BASE-TX/1000BASE-T). Connection via a shielded Ethernet cable (not included): at least Cat5 or Cat5e or Cat6 for 1000BASE-T USB connectivity USB-B port (Rev. 2.0) with a USB-A-B cable Noise emission Does not exceed 70 dB(A) Printer control Interactive touchscreen Notifications Touchscreen notifications, SMS/email via dashboard, Two LED status lights, speaker for notification sounds Print preparation Desktop software PreForm File format STL or OBJ Accessories: Building platform BP-F3l-01 Cleaning tool CT-F3L-01 Resin tank 2 available (one unused) Condition: used Scope of delivery: (See pictures) (Changes and errors in the technical data, information is subject to change!) We are happy to answer any further questions for you over the phone. Written orders can be placed by email or fax

Condition: excellent (used), Here we offer an Eos EOSINT plastic laser-sintering system. The following things are included in the EOS P380 system Construction space container Powder hopper Overflow container Cooler: Termo TEK Termochiller type: P411-12448-1 3DM 8 zones process chamber heating 250°C Each zone individually adjustable, homogeneous temperature field ± 1°C Kelvin 350mm x 350mm x 610mm Voltage 3/N/PE/ 400V AC Frequency 50 Hz Connected load 8 kW Fuse protection 32 A MAX. Laser power 100 W Laser class open 4 Dslnogqux Ns U Rc Tjut Laser class closed 1 Weight 850 kg Type: EOSINT P 380 Condition: used / used Scope of delivery: (see picture) (Changes and errors in the technical data, details are reserved!) Further questions we can answer on the phone for you.

Condition: excellent (used), Desktop Metal 3D Printer Complete System Here we offer you Desktop Metal 3D printer complete system. Desktop Metal 3D printer studio system Complete system: 3D printer + debinding machine + sintering furnace Desktop Metal The three-part solution includes 3D printer, debinder and furnace Manufacturer Desktop Metal Model Desktop Metal Studio System Operating condition Used (Good) Year of manufacture 2019 Desktop Metal Studio System Includes: 1.1 Desktop Metal Studio 3D Printer Bound Metal Deposition (BMD) Technology. Features: Printed materials metal Technology FDM Use Industry Other features Office X-stroke 30 cm (12 in) Y-stroke 20 cm (8 in) Z-stroke 20 cm (8 in) Description: Unlike laser-based systems that selectively melt metal powders, the printer extrudes bonded metal rods - similar to an FDM printer. This eliminates the safety requirements often associated with metal 3D printing, and it enables new features such as the use of closed-cell fills for lightweight strengths. 1.2 Desktop Metal Studio debinder (delamination machine) fully automatic debinding Cleaning tank: 17.4 L (in process) / 22.5 L (stock) Description: The debinder prepares green parts for sintering by dissolving the primary binder. With a low emission design, it requires no external ventilation and is safe for an office environment. Automatic liquid distillation and recycling means no need to refill between cycles. 1.3 Desktop Metal Studio Sintering Furnace Djln Ujk Hz Nqj Rc Tjut hybrid technology (microwaves & conventional heating elements) Installation space 305x205x205mm Carbon housing Gas supply: 2 x 900 L gas cylinders Heating power: 20 kW Features: Function Sinter Configuration Chamber Heat source gas Other features High temperature, automatic Maximum temperature 1,400 °C (2,552 °F) Description: Fully automated and sized to fit through an office door, the furnace delivers industrial-grade sintering in an office-friendly package. Built-in temperature profiles matched to each design and material provide uniform heating and cooling without the residual stresses associated with laser-based systems. Condition: used / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: excellent (used), Here we offer you a 3D-SYSTEMS 3D printer. The ZPrinter ProJet 660 Pro 3D printer has a large installation space. Thus, even large models can be manufactured without prior cutting. Dsln U Rcshb Dtpo Tjut Furthermore, the large footprint increases productivity when printing many small models in one print run. 3D color printer with enormous productivity and color fidelity. The ProJet ColorJet color 3D printers from "3D Systems", also known as ZPrinter, work layer-forming according to the ColorJet CJP "Binder Jetting" process, directly in a powder bed. This eliminates the need for dedicated support structures, even for complex and detailed prints with these 3D printers. The unconsolidated powder supports the parts during printing and is then recycled semi-automatically. Areas of application Communication of form and design, installation analysis, initial functional testing, variant testing, form finding, design, development, marketing, sales, master models for thermoforming, dental models, presentation... Best ColorJet 3D color printer in its class for applications with the highest demands, it sets new standards in the field of full color 3D printing systems. Technical data: ZPrinter ProJet 660 Pro 3D Printer Size: 254 x 381 x 203 mm Color: 390,000 colors (5 print heads, including black) Resolution: 600 x 540 dpi Minimum detail size: 0.1 mm Automation: Complete (automated set-up and self-monitoring, automated print

Condition: excellent (used), Eos EOSINT plastic laser-sintering system Here we offer an Eos EOSINT plastic laser-sintering system. Dolnoft R Swe U Rc Tout Eos EOSINT Plastic Laser-Sintering-System P380 The EOS P380 system includes the following Installation space container Powder container Overflow tank Cooler: Termo TEK Termochiller Type: 802-18644-3 Unpacking stamp Removal trolley 3DM 8 zone process chamber heating 250°C Each zone individually adjustable, homogeneous temperature field ± 1°C Kelvin 350mm x 350mm x 610mm Voltage 3/N/PE/ 400V AC Frequency 50 Hz Connected load 8 kW Fuse 32 A MAX. Laser power 100 W Laser class open 4 Laser class Closed 1 Weight 850 kg Type: EOSINT P 380 condition: used / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We can answer further questions for you on the phone.

Condition: excellent (used), SLM Solutions Type: SLM 125 Water-water cooler, replaceable Build space (L x W x H): 125 x 125 x 125 mm (minus substrate plate height) Build space reduction (L x W x H): 50 x 50 x 50 mm (minus substrate plate height) 3D optics configuration: Single (1x 400 W) IPG fiber laser Build rate: up to 25 cm³/h Variable layer thickness: 20 µm - 75 µm, 1 µm steps Min. structure size 140 µm Focus diameter 70 µm - 100 µm Max. scan speed: 10 m/s Average protective gas consumption in the build process: 0.6 l/min (argon) Dujln U Rsu Ebt Ujc Tst Average protective gas consumption in the flooding process: 70 l/min (argon) Electrical connection / power consumption: 400 Volt 3NPE, 32 A, 50/60 Hz, 3 kW Compressed air requirement / consumption: ISO 8573-1:2010 [1:4:1] 7 bar Machine dimensions (L x W x H): 1400 mm x 900 mm x 2460 mm Machine weight (without / including powder): 700 kg, 750 kg with Pu Was operated with implant steel! Laser hours: 4954 Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data, information are reserved!) We are happy to answer any further questions you may have over the phone.

Year of construction: 2009, Condition: excellent (used), The Objet Connex 500 is Objet's groundbreaking 3D printer for multiple materials. 500 x 400 x 200 mm in size, designers and engineers can quickly create prototypes to simulate the intended end product closer than any other technology. What's unique about Objet Connex? With Objet's patented simultaneous multi-material spray technology, the Objet Connex 500 can print models of up to 14 different materials in a single print job.The Objet Connex500 offers an unmatched selection of over 60 materials, including up to 51 Digital Materials ™.It allows users to simulate various mechanical and physical properties, from rubber to rigid, opaque to transparent; and standard to ABS engineering plastics.Outstanding Productivity The Objet Connex 500 offers:- Multi-Material Models - No need to design, print, and glue separate model elements- Different parts- Multiple materials models - No need to design, print, and glue separate model elements- No need to design, print, and glue separate parts- No need to select your own materials to effectively highlight different material components in complex or composite products. Different materials. Same compartment - saves time and meets multiple requirements simultaneously - Excellent 16 micron high resolution pressure accuracy - 600 DPI X Duolod Sukxon U Rc Tjt

Condition: excellent (used), Eos Metal Laser Sintering System Here we offer an Eos Metal Laser Sintering System. Dolsqzgvajn U Rc Tsut Material processed with the system: Gold Laser type: Yb-fibre laser, 100 W Scan speed: up to 7.0 m/s Construction volume: Ø80mm x 100mm Dimensions (W x D x H) system: 800 mm x 950 mm x 1,850 mm Installation area: 1000mm x 3000mm x 2500mm Weight approx. 580 kg Software: EOS RP Tools, Offline PSW CAD interface: STL Network: Ethernet Type: EOS M080 External gas connection (nitrogen) Power consumption maximum 2.3 kW 13A Scope of delivery: See pictures Condition: used (Changes and errors in the technical data, information are reserved!) We will be happy to answer any further questions you may have over the phone.

Condition: excellent (used), German RepRap 3D Printer Here we offer you a German RepRap 3D printer. The X1000 from German RepRap is a large capacity 3D printer that produces industrial quality objects. 3D Printer Datasheet: German RepRap X1000 Manufacturer: German RepRap Country: n.a. Material: Standards (PLA, ABS, PP ...) Technology: Fusion layering (FDM/FFF) Pre-assembled: n.a. Dimension: 1725 × 1500 × 1320 mm (67.91 × 59.06 × 51.97 in.) Weight: 400 kg / 881.8 lbs Nozzle diameter: 0.4 / 0.6 mm ( in.) Minimum print density: n.a. Print speed 150 mm/s mm/sec Dolnoivpdwo U Rc Tsut Precision XY: XY : 20 µm µm Max. Volume: 1000 × 800 × 600 mm File format: n.a. Software: Simplify3D Connectivity: Wi-Fi OS compatibility: n.a. Power: n.a. Other features: Touchscreen Type: German RepRap X1000 Condition: used / used Scope of delivery: (See pictures) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.