Used Beverage production for sale (915)

Condition: used, Year of construction: 2001, Overview  This carbonator from German manufacturer Unitec GmbH was built in 2001. It was installed between flash pasteurizer and filler. The buffer tank, which is included in the scope as used as a sterile buffer tank between carbonator and filler. The juice factory is planning a completely new processing plant and filler, therefore this equipment is available.  Technical Details  Capacity: 13,000 litres per hour Products that can be processed: beer, cider, soft drinks etc. Max. carbonation levels 0-8 g/l CO2 8200 l buffer tank CO2 content can be adjusted on control panel Siemens S7 control panel Level regulation in the buffer tank was done by flash pasteurizer PLC and would need to be integrated into carbonator plc Cob Hhwsvdd Uujnuegt

Condition: used, Year of construction: 2013, Overview  The Linaflex tunnel pasteurizer was built in 2013 by the German manufacturer Krones. The machine has only a few operating hours, was still in use in 2023 and has been partially overhauled. The machine has already been dismantled, stored and is immediately available.   Technical data  Treatment area: 96 m²  Consumption  Maximum temperature of the drain water 80 °C  Steam - design flow rate 1,996 kW  Heat quantity 1st cooling medium 1,099 kW  Main water - design flow rate 47.6 m3/h  Air consumption 1 m3/h  Number of decks: 1  Total number of zones: 10  Number of pairs of regenerative zones: 3  Number of pasteurizing zones: 4  Number of tunnel modules (without inlet and outlet module): 10  Equipment  Main conveyor: Marathon Belt  Filter plug-in sieves  Material side doors: Stainless steel  Nozzle material: Plastic  Various extensions such as container sliding system, consumption measurement, dosing systems, machine insulation  Heating of the machine by means of plate heat exchanger incl. automatic temperature control  Dimensions  Width 5.230 m  Outer width incl. pumps and operating area 7.330 m  Total length without operating platforms 20.606 m  Cob Hhwsvmyuionuogt

Condition: used, Year of construction: 2018, Overview  The offered filling line for pouch bags was designed by a Swiss company and also delivered by them in 2018. The main manufacturer is Linapack. The line was only used for seasonal production only (2 months a year), therefore the working hours are very low. As the sales volumes are not further increasing, the seller decided to sell the line and stop the production. The line is still assembled and can be shown. It is possible to handle different formats of pouch bags and to do hot filling up to 85°C. The current owner used it for Cocktails but it can also be used for various other non carbonated drinks. Tech. Details Capacity: 50 bags/ hour, depending on the volume 750 -900 l/h Bag dimensions Width: 80 - 180mm Height: 100 - 300mm Filling temperature: 71 - 85 °C Siemens PLC Line consists of  1,000 l buffer tank agitator Flow meter Level detection Cleaning spray ball Integrated into pasteurizer control system Flash pasteurizer Kreuzmayr PAS-900 Capacity: 750 - 1,000 l/h Heated with steam Fully automatic Automatic cleaning with Hot water steam acid caustic With tubular heat exchanger Automatic filler Linapack LFS-1000 Duplex with Siemens PLC Seven Station system motorized magazine with pick and place system to supply pouches Opening of the pouches with vacuum gripper Filling unit with flow meter and temperature sensor, automated rejection, if temperature is too low Sealing of pouches Sealing of pouches Cooling of the seal Pouch discharge Check weigher Cooler and dryer for pouches Cooling in water bath With UV lamps for desinfication Drying by blower, five nozzles Conveyors and collection table Cgsbsvptt Rs Hhwnujt

Condition: used, Year of construction: 2013, Overview The brewhouse, including fermentation and storage tanks and a KEG washer, was built in 2013 by the Austrian manufacturer Flecks. The whole equipment is in a very good condition and can be visited. Equipment Mash and brew kettle incl. whirlpool function, agitator, stainless: 1.000 L net Lauter tun, stainless: 1000 L net Calandria system (outdoor cooker), electrical heating, stainless. Integration of existing gas, heating + electrical: 72 kW Vapour-condensation system Whirlpool- system Mash and wort pump: 2,2 kW Hot water tank with electrical heating, stainless: 1000 L, 9 kW Wortcooler GEA 2-stages pT 100, electron. Thermometers Incl. all pipes, fittings, valves in stainless. Full automation upgrade: electrical switch board for full automatic process control switches, fuses: 100 kW Main connection 400 V Emergency switch PC-databus and modem Visualisations and automation software "BRAU-MANAGER" 2x cooling units 2x cooling water pumps 1x 2,000L fermentation tank: 2 outlets, cooling jacket, insulation, stainless cladding (for main fermentation) 4x 2,000L pressure tanks horizontal: 3 bar, incl. cooling jacket, insulation stainless cladding for secondary fermentation and ripening + as serving tanks) 4x 2,000L pressure tanks vertical: 3 bar, incl. cooling jacket, insulation stainless cladding (for fermentation and ripening + as serving tanks) 1x CIP-cleaning agent tank 1x beer- and CIP pump: 0,75 kW 3x beer hoses, food quality 1x malt mill, 2 rollers with motor: 1,5 kW 1x KEG cleaning equipment (10 pcs/hour) 1x Main compressor Csb Hhwjuzbb Djnuegt

Condition: used, Year of construction: 2016, Overview  The MICROMAT M 1/1-F KeyKeg filling machine is a fully equipped solution designed to streamline and automate the filling process for 50-60 KeyKegs per hour. This machine comes with everything necessary for high-efficiency operations, including a complete CIP (Cleaning in Place) system, ensuring that the cleaning process is integrated and automated, maintaining optimal hygiene without the need for disassembly. Technical Data  Capacity: 50-60 KeyKegs per hour Dimensions:Depth: 1,300 mm Width: 800 mm Height: 2,200 mm ± 50 Working station height: 600 mm ± 50 Connections:Product: DN 25 Media: DN 25 Control air: Socket ¾" Electrical connections:Voltage: 230/400 V, 50 Hz / 480 V, 60 Hz Connection power: 1 kW (without tank pumps) Noise level: Below 85 dB A Key Features  Fully integrated CIP system: This allows for internal cleaning of the filling head and pipelines without manual intervention, ensuring hygiene and reducing downtime. Control system: Siemens S7 with a user-friendly interface. Robust construction: Stainless steel base frame and critical components. This machine is ready to use, offering all the equipment needed for fast and efficient KEG filling operations​ Csb Hhwnsu Hbk Aeuogt

Condition: used, Year of construction: 2017, Overview The Crate inspector was built in 2017 by Germany manufacturer Visiontec. It is adjusted for 0,5l glass bottles and twenty modul crates. The inspector comes with a multi camera system. If an external bottle is detected, the crate will be pushed out in another line. Currently the setup is for a long side leeding crate. Cgeb Hhwsl Hx Ibenust

Condition: used, Year of construction: 2022, Overview  The glass bottle filling line was manufactured in 2022 and in use in a brewery in Spain. As the owner is now shifting his production to a contract bottler due to increased volume, this line is for sale. Plant in detail  Robot depalletizer | Kuka (Nownology) | KUKA KR 470 PA | 2022  Capacity: 15,000 bph Weight: 470 kg  Isobarometric Filler | Nagema | 40/10 | 1990 Completely overhauled/modernised and also equipped with a new control system in 2022 Unused since overhauling  Capacity: 9000 bph on 330 ml Number of filling valves: 40 Number of capping elements: 10 Formats: 330 ml and 500 ml Products: beer and CSD Control: Siemens S7 with touch panel Fill level inspection | Heuft | --- | 2022 2x Labeller | ENOS | S5000 | 2022 for self adhesive labels Capacity: 5,000 bph Self-adhesive labels  Number of labelling stations: 3 Length: 2.850mm Width: 1.500mm Height: 2.000mm Weight: 450Kg Electr. connected load: 2 kW Wrap around packer | SMI | WP300 | ---  Modernized in 2022 (unused since then) Robot palletizer | Kuka (Nownology) | KR240PA | 2022  Capacity: 15,000 bph Weight: 240 kg 4 - 14 kg boxes Scope of delivery Conveyors  Cob Hhwnomk I Dpeusgt

Condition: used, Year of construction: 2018, Overview The filler and capper was originally built by the Stork company and was overhauled by the ROBAK company in 2018. The machine can be used to fill still beverages into glass bottles. The machine is in excellent condition, currently dismantled and stored in a well-maintained environment. Technical data  Capacity: 7.000 bph Filler is prepared for 700 ml bottles 31,5mm aluminum cap The machine is missing a cap aligner and a cap slide and feeder. These should be made for a specific cap Cgobomnkhfj Hhwnujt

Condition: used, Year of construction: 2004, Overview  The machine was built in 2004 by the German manufacturer Langguth and is completely overhauled. The pictures do not correspond to the actual machine, but are well comparable and representative.  Technical data  Gluing height up to 210mm Completely overhauled as shown on the pictures, but with base frame made of steel. Including 2 bottle formats+ 2 label formats Optional with take off turntable Cjb Hhem D Ukiownujgt

Condition: used, Year of construction: 2000, Overview  The labeler was manufactured in 2000 by the German manufacturer Krones. It can label up to 22,000 bph and has processed 0.5l so far. The machine can be purchased refurbished and with warranty on request.  Technical data  Rotary labeling machine for the application of a wrap-around label Capacity: max. 22.000 bph  Processed formats: 0,5l Number of plates: 15 Hot glue Label: OPP Roll fed Cgjb Hhom Ip Dkewnust

Condition: used, Year of construction: 2011, Overview  This Heuft Glas InLine reflexx IR is an inspection machine for empty bottles, designed for quality control in filling lines. The machine has a maximum output of 46,000 bottles per hour and was originally delivered in December 2011. It is in very good condition and ready for use at short notice. The flow direction is from left to right and it is equipped with a Secomak blower instead of a compressed air blow-off system. Technical details  Output: Maximum 46,000 bottles/hour Flow direction: Left to right Equipment: Two triggers Secomak blower Transponder recognition for RFID test bottles Rejection monitoring Heuft HLAN network (can be retrofitted as an option) Two-way rejection Delta K to the right Four type licenses Delta K tripods for belt height of 1130 mm Two fluids for lye detection Missing components Infeed control (must be added if required) Thread blow-off (must be added if required) Documentation (not available, can be replaced) Controls  Monitoring of the incoming bottle flow (optional) Output of a stop signal if bottles are too high, too wide or lying down Inspection of the bottle base Inspection of the mouth sealing surface Inspection of the thread Inspection of the inner and outer side wall Detection of conductive liquids (e.g. lye) Detection of residual liquids (e.g. oils, paints) using IR technology Rejection of faulty containers or output of a rejection signal Monitoring of the rejection process Ceb Hhwsu N Snksnusgt

Condition: used, Year of construction: 2020, Overview This automatic fishfilet-skinner, type: Varlet 1258 was built in 2020 in France. The Varlet skinner has been designed for fully automatic skinning of fish fillets (f.e. Thick skin fillet , Fresh salmon , Smoked salmon , Fresh trout , Smoked trout). The V1258 is an easy to use, industrial, single track automatic skinning machine. It is placed on a support on wheels and proposed with an outfeed belt. Specially designed for firm-fleshed fish such as trout or salmon, the V1258 can skin both fresh (water) and smoked (air) fillets. The V1258 is equipped with a notch thickness adjustment system. Its small footprint is achieved by replacing the outfeed belt with a tilting slide that can be removed without tools, to receive the products in boxes. Finally, this automatic machine improves the safety of the user. Technical Details Cutting width: 320mm Height: 1300mm Width: 800mm Length:  1200mm Weight: 140kg  Power: 1,2Kw Scope of delivery Automatic for fish filets | VARLET | 1258 | 2020 Cobsu U Hrxe Hhwnuegt

Condition: used, Year of construction: 2016, Overview  The complete filling line for big size PET bottles is located at a mineral water plant and was used for filling water. The line has been regularly serviced and is in very good condition. Output: 3,000 bph List of machines Blow moulder| Kosme| KSB4RG 2016 | 3600 bph Air Transporters| NTS | 2016      Rinser - Filler - Capper| GyM | MONOBLOC 12/3 PVG| 1995|3000bph Caps Feeding Tolva| GyM | 1995      Handles feeder |TAS| VA-1150/75C | 2009 | 3000bph Handle applicator| And&OR | 50SIA5000R8P2-TL | 2009| 3000bph Labeller| Auxiemba | Gacela R-16/8-HM-12 | 2010 | 4100bph Lot Coder| MACSA | K-1030PLUS| 2008      bottle spinner / rotator| GyM | 2001     Divider | SMI |  DIVIPACK 2000  |2002    Shrink Packer| SMI | LSK 30F | 2002 | 7200 bph (30 packs per minute 2*2 on 2,5L / 2 on 5L) Cjb Hhjtuyq Rswnuegt

Condition: used, Year of construction: 2000, Overview This bottle washer from the German manufacturer Klinger was built in 2000. The washer is made entirely of stainless steel, has a Siemens S7 control, 2-fold heaters and surge pumps for high cleaning performance. Technical details Capacity: 9,600 bph;   20 bottles per row Scope of delivery bottle washer | Klinger | Euro Class-D 20/1/73 | 2000 water treatment plant | Hager + Elsässer | 2000 incl. cation and anion exchanger, incl. salt container, pre-filter and UV probe with a capacity of 5 m3/h and  The water treatment system was designed to operate the bottle washer and the RO system RO reverse osmosis plant | Hager + Elsässer | 2000  with full desalination capacity of 2.5 m3/h Cgsb Hhwnstxd A Soujt

Condition: used, Year of construction: 2016, Overview This brew house was built in 2016 by Spanish manufacturer Prominox Villarobledo and has a wort volume of 30 hectoliters. Fermentation and storage cellars and various accessories are included. All the equipment has already been dismantled and stored. Scope of delivery  Electrical panels for tanks and pumps Stainless steel tank | model DFF99 | 2000 | 25,000 liters Labeler | model MC-220 | 2016 | 1300 bph (up to 1.5 liters) Filler | model AM DPS 811G | 2016 | 1200 bph (0.33 liters) Sealer | model SK2 | 2016 | Semi-automatic box sealer, motor speed: 20 m/min, power: 0.13 hp 2x Horizontal tank | model AD MERKBLATTER | 2016 | Isobaric 3,000 liters 4x Fermentation tank | 3,000 liters 2x Fermentation tank | model PROMINOX | 2016 | 5,000 liters Open tank Low tank | model STORK TGSW Filter | model PSF JB 014 350143 | 2017 Grinder | model OOEHLER OL 6000 | 2016 Silo and feeder Resistance tank | model PROMINOX | 2016 | 3,000 liters 2x Brewing/mashing tank | model PROMINOX | vertical | 2016 | 3,265 liters Filter tank | model PROMINOX | 2016 | 4,500 liters 2x Pump | model MIM GRUP FL31Cl Pump | model CALPEDA MXH 204/A Industrial scale | model GRAM MISSIL F2-60 Pump | model LOWARA HTB 32-125/30 Pump | model ABB INOX MIM GRUO FLUID-102 Industrial sink Refrigeration chamber Pump | model PYD SH2-40 Osmosis system | model HIDROTEC Water treatment system Cooling system | model AIRWELL AQVH,125BLN,R410A,BFC,1P | 2010 Compressor | model INGERSOLL-RAND 11BAR | 2001 Boiler | model ATTSU RL-400/12 Forklift | model NICHIYU FB18PN-55-450 PS PL | 1999 Cgeb Hhwnetzg H Dsujt

Condition: used, Year of construction: 1997, Overview This MAGURIT 052 frozen block cutter the German manufacturer MAGURIT was built in 1997 and is maintained. Suitable for frozen blocks (down to -20 ° C). For small and mid-size producers. Cutting of E2-blocks. The blocks are fed into the cutting area by a pneumatically operated lifting chute. Product is discharged directly into 200 ltr. meat trolleys. Technical Details Height  1750 Width   950 mm Length  1900 mm Voltage Electrical: 400V 50Hz 3N Main material   Stainlees Steel Chamber dimentions     530 x 600 x 280 mm Scope of delivery GUILLOTINE frozen block cutter | MAGURIT | 052 | 1997 Cgsbst Druls Hhwnujt

Condition: used, Year of construction: 2007, Overview This angle meat grinder, type: Laska WW 160 1G was built in 2007 in Austria. It is a 160mm angle grinder, stainless steel machine, with loading device for 200 liters trolleys, hopper capacity approx. 350 liters, 1 speed working worm, 1 speed feeding worm. Designed for practicality and performance, provides seamless operation of food production facilities. Its ability to grind both fresh and frozen products (up to -5 C) The Machine comes in a set with loading device for 200l meat bins and trolley for tools. The machine will be overhault including refitted outfeed protection and circular safety for the hopper. Technical Details Throat diameter: 160 mm Power: 36 kW Efficiency: up to 9.000 kg/h Dimensions: L: 1800 x W: 1650 x H: 1600mm (2850mm with loading)Weight: approx 2000kg Scope of delivery angle meat grinder | LASKA | WW 160 1G | 2007 Cgsbjt Hzkbj Hhwnuet

Condition: used, Year of construction: 2012, Overview This spiral oven, type: Unitherm (Marlen) XS-OV-12-E was built in 2012. The spiral oven convey food upward by contiuous belt that travel in 6 circular tiers within a single oven cover. This sytem is more versatile and have a smaller footprint than linear oven. Aplications: roasting, baking , broiling, steaming, pasteurizing or cooking of f.e. bacon, chicken parts, seefood, kebabs and vegetables. Technical Details Unitherm spiral oven, model: XS, serial number: SPOV-XS08, s/s mesh belt, belt width: 300 mm, clearance: 340 mm x 140 mm (product height max. 100 mm) total dimensions: 2200 mm x 1850 mm x 2300 mm. Steam supply: 200 lbs Water supply: 0,25 gal Electric supply: 68 kW Scope of delivery Spiral oven | Unitherm (Marlen) | XS-OV-12-E | 2012   Cgsb Hhst Tr Siewnujt

Condition: used, Year of construction: 2009, Overview This continously crate washer, type: HOBART FUX-C was built in 2009 in Germany. The crate wahser ensures that all the dirt on the crate, such as proteins, blood residues, fasts and dried-on dirt, is removed in a single wash cycle. Technical Details Capacity: up to 150 crates/ hour width 992 mm length 3.000 mm height 1.474 mm max crate width 612 mm max crate height 440 mm Scope of delivery continously crate washer | HOBART | FUX-C | 2009 Cjb Hhwneub Rqfouegt

Condition: used, Year of construction: 2018, Overview  The crater was used in a Belgian brewery and was stopped in Summer 2024. It was used to put 330ml bottles with mechanical closure into a wooden or plastic crate. Technical Details  Manufacturer: TMG Year of manufacture: 2018 Model: IEC 61439-2 Bottle Format: 330ml Crate format: 4x3 wooden or plastic crate Capacity: 8 cycles per minute Cgjb Hhwouhthtonuot

Condition: used, Year of construction: 2016, Overview  The atmospheric filler was manufactured in 2016 by the Italian manufacturer GAI and used in a Belgian brewery. Technical details  Capacity: 6,000 bottles/h Formats 330 ml Number of valves: 16 Cob Hhwnjuhthyjusgt

Condition: used, Year of construction: 2010, Overview  This SOGECAL steam boiler, model M8KK, was manufactured in 2010 and is available for sale due to the company's relocation, where it is no longer required. It has been used exclusively for beer production, runs on diesel fuel and is available immediately. Technical Data  Model: M8KK Year of Manufacture: 2010 Fuel Type: Diesel Service Pressure: 8 Kg/cm² Test Pressure: 17 Kg/cm² Design Pressure: 11 Kg/cm² Steam Production: 450 Kg/h Thermal Power: 2700 Kcal/x100 Heating Surface: 8.8 m² Operating Temperature: 174 °C Volume of Water/Oil: 0.65 m³ Ceb Hhwsuqrd Tsnusgt

Condition: used, Year of construction: 2011, Overview  The bottle cleaning machine was built by the German company Krones in 2011. It was in operation at a large beverage producer until last and is still assembled.  Technical details  Capacity: 20,000 bph Formats: 0,25l and 0,75l Number of bottles per row: 22 Siemens S7 Equipment Label discharge  Rotary spraying  Continuous machine  Stainless steel body  Documentation  Software backup  Stainless steel pumps  Conductivity measurement  Finger task  Spare parts Bottle cell tips Bottle cell supports Cgjbeu Rindo Hhwnuot

Condition: used, Year of construction: 2012, Overview This tumbler with cooling, type: GERMO KT2000 was built in 2010 in Germany. Technical Details volume: 2000 liter eletrical power: 45 kW main material: stainless steel with integrated cooling aggregate Scope of delivery tumbler with cooling | GERMO | MAXI-TUMBLER KT2000 | 2012 Cgsb Hhwnougpxfsust

Condition: used, Year of construction: 2019, Overview  This canning machine “100FBEV” from British manufacturer, Innovus, was built in 2019. It has been well maintained with regular servicing and is in great condition.  Tech. Details  Capacity: 2000 cans per hour Number of filling heads: 6  Can formats:  330ml 440ml Can end spec: 200 + 202 Dimensions (Floor): 2500mm x 1300mm Machine weight: 600kg Added bonus of UK engineering support (cost at buyer expense)   Cgob Hhwjr A S E Ajnust