Year of construction: 2009, Condition: not inspected (used), Rotary tablet press Horn 30 / EU B 1 Number of station 30 B=25 Dobek E Ha Is Hl T D Uout 2 Max.Tablet dia. Round mm 25 Shaped mm 25 3 Max. tablet Thickness mm 8,5 4 Max. main compression force t 8 5 Machine Dimension mm 1.250 x 1.000 2.000

Year of construction: 1993, Condition: ready for operation (used), This listing is for a 1993 Sinclair mixing vessel. Features include: Deb Hl Tjip Ehqj D Usut - Top mounted propellor agitator - Stainless steel construction - Bottom outlet - Free standing - Approx 16000L capacity

Condition: excellent (used), GSVG Automatic splitting unit with filter Container Dob Heti Dhlol T D Ujut

Year of construction: 2021, operating hours: 100 h, Condition: like new (used), Functionality: fully functional, machine/vehicle number: 210000002, Industrial vacuum cleaner with integrated liquid bath separator Dust class H/Type 22 400 volts, 2,200 watts 60 l dirt container Air volume max: 330 m³/h Vacuum pressure max: 240/300 mbar Filter levels: 1st filter level: liquid bath separator 2nd filter level: demister 3rd filter level: VA filter 1m² 4th filter level: H14 filter cartridge 2mEX-protected for use in zone 22 according to EN 60335-2-69 including appendix AA and EN 62487 as well as ATEX 2014/34/EU incl. 3.5 m ESD-PUR suction hose Ø40mm electr. conductive with VA-Kamlock coupling, crack nozzle Serial number 21000002 LxWxH: 83X68X165cm 1.00 piece 072-0401-ESD ESD extraction arm Ø50mm x length 1,500mm, table mounting 030902 certified according to IEC 61340-5-1, 3 joints Dsbjvt Aghj Hl T D Uout 1.00 piece ESD flat hood Ø50mm, 300x200mm including hood pipe connector, certified according to IEC 61340-5-1 SET: console for extraction arm Ø50mm Material: ST/K

Year of construction: 2008, Condition: excellent (used), Telstar Glove box isolator Dispensing Isolator with the following options: Full stainless steel construction in SS316 3 Gloves 3 wall power sockets 230 Volt (UK plug) Sluice pass box with auto locks Descending bottom with drain and valve light in workspace and sluice 3 x Magnehelic pressure gauge for: sluice , workspace and filter pressure Containment breach alarm Work space L 1300 mm W 640 mm H 800 mm Sluice door opening W 310 mm H 520 mm Built in filtercartridge Built in exhaust fan (frequency controlled) Exhaust pipe 100 mm with flange 230 mm Power 400 V 3 fase+N Dsb Hl T Dopvhkps Ueut On stainless steel frame with casters Fully tested and in excellent condition

Condition: used, machine/vehicle number: 01, space requirement width: 850 mm, overall weight: 562 kg, total length: 1,700 mm, total height: 1,900 mm, GAF bag filter, container capacity 200 liters, double-jacket capacity 30 liters, permissible operating pressure container 10.5 bar, permissible operating pressure double-jacket 5 bar, operating temperature 150 °C, material in contact with the product stainless steel 1.4435 (V4A). The filter is mounted on a galvanized steel trolley with wheels. Duob Hlevt Tg Se T D Uet

Year of construction: 1998, Condition: used, Rotary tablet press Horn 30 / EU B Duob Hl Tok E E T Ej D Uet 1 Number of station 30 B=19 2 Max.Tablet dia. Round mm 16 Shaped mm 14 3 Max. tablet Thickness mm 8,5 4 Max. main compression force t 8 5 Machine Dimension mm 1.250 x 1.000 x 1850 Machine has been revised by Luxner

Year of construction: 2016, Condition: new, machine/vehicle number: NX000ANX, // New Unused 2016 FEDEGARI XFSW7 Eco-Steam Washer This listing is for one of two brand new 2016 FEDEGARI XFSW7 Eco-Steam Washers complete with trolleys, controls and documentation. A high-end two door GMP washing solution, the XFSW7 (part of FEDEGARI’s FSW range) combines impeccable cleaning results with impressively low operational costs over conventional hot-water systems. This offering represents a unique opportunity for investment in a best-in-class machine, unused and in the original packing, at a fraction of the original retail price (over £230,000GBP). Applications include uses in the food, laboratory, bio-pharmaceutical and cosmetic sectors with suggested loads including machine parts, tools and glassware. // Key Information Unit Dimensions (LxWxH): 2300x1690x3000mm Dimensions of Inlet: 1200x1200mm Chamber Depth: 1200mm Door Type: Vertical Sliding Doors Voltage: 400v Three Phase Frequency: 50Hz Protection Rating: IP45 // Features Dsb Hl T Djf Dy Uzs Uout - Built-in steam generator reducing utility and installation requirements - Comes with two original trolleys both new and boxed - Includes 3 additional dosing ports on top of the standard 2 ports - Chamber and hydraulic components made of AISI 316L stainless steel with sanitary finishing. - Doors made of glass with perimeter reinforcements in AISI 316L stainless steel. - Internal trolleys designed to avoid any water stagnation thanks to dedicated draining points. - Thema4 process controller ensuring total control on washing performance and reliability during inspection and validation activities. - Audible and visible alarms in case of emergency, with an internal LED lamp operative during the whole cycle - Packaged as an integrated skid with a separate control cabinet. // Compliant to the following standards: - European directives: 2014/30/EU – Electromagnetic compatibility (EMC), 2014/35/EU – Low tension equipment (LVD), 2006/95/EC – Safety of machinery (MD) - European standards: EN 55011, EN IEC 61000-4-2, EN IEC 61000-4-4, EN 61000-6-2, EN 61000-6-4, EN 60204-1 - Electrical steam generator compliant to: 2014/68/EU – Pressure equipment device (PED) - FDA: compliance for non metallic component in contact with process fluids - GMP - GAMP5 - 21 CFR Part 210, 211 e 11 - UL 508A - NFPA-79 - ASME BPE

Condition: like new (used), Year of construction: 2015, Double-jacketed mobile tank with top agitation. Dsb Hlot Iwf Do T D Usut 2 interchangeable agitators Supplied with lifting jib to change agitator. Model: LMX 500 Year:2015 Max. capacity: 500 Kg Agitation control by SIEMENS Panel

Year of construction: 2014, Condition: good (used), Millipore Flow Cxtometer Guava easy Cyte 8 HT year of manufacture 2014 regularly serviced .with PC and software Location Cologne Dujb Heiv S Arel T D Uot Laboratory closure various equipment available , please request detail list

Condition: excellent (used), Year of construction: 1975, Continuously operating machine for high-grade compaction of dry, powdery and fine crystalline products can process 20 - 150 kg / hour (depending on the type of product) Rollers Ø: 200 mm Working width: 50 mm Dueb Hjvmy E Uol T D Ujt Manufacturer: Hutt Year of construction: 1975 Floor Space: 150 x 95 x 195 cm

Year of construction: 1999, Condition: reconditioned (used), Functionality: fully functional, A used and overhauled blister machine, model UPS1030 ET (94/125) Technical data - Format range Feed width maximum 142 x 255 mm Form depth maximum 10 mm - Output at least 15 cycles/minute - Output maximum 70 cycles/minute PVC - Output maximum 50 cycles/minute ALU Includes: - Form film roll carrier with two tension shafts, for maximum roll diameter 800mm, electromechanically foldable, including cutting and gluing table, painted neutral grey - Continuous conveyance of the form material with a contactless loop - Contact heating with 6 individually controlled heating zones (3 zones per plate) - Forming station prepared for PVC or aluminum form film with 4-column guide system - electr. Preparation for pore and crack detection (Visio-Scan) - Clamping pliers for securing the forming film in the forming station when the machine stops - Servo-controlled feed after the forming station, film shrinkage compensation guaranteed - Contact cooling with servo-controlled feed - Cooling water connection for upper and lower forming tool and lower sealing tool - Deflection with compensation pendulum - Filling section, approx. 1900mm with slanted brush and safety flap - Electrical preparation SimTap 2.i and brush feed - Sealing station for plate sealing and toggle lever drive, with 4 column guide (reinforced version with tuning domes) - Overload protection in the sealing station - Upper sealing plate automatically retracts when the machine stops - Cover film holder mounted on the back of the machine with 2 pneumatic tension shafts core diameter 76mm - Deflection shoulder for cover film with pressure presence control - Stretching station for cover film with touch probe controlled Stretching (print mark on the fly) - Contact cooling station after the sealing station - Feed before the punching station - Embossing station - Perforating station - Punching station, adjustable, including blister lowering - Waste cutter with integrated feed for immediate cutting from the waste grid - Compressed air monitoring - Sliding door panel, protective doors electrically switched for emergency stop when actuated 2-channel, made of plexiglass, hinged hood in the transfer area Dujb Hsr Ii R Uol T D Ust - Switch cabinet hinged on the back of the machine Mains 400/230 volts, 3/N/PE 50 Hz with neutral conductor and separate earthing. The stations were completely overhauled and the discontinued parts were replaced at the time of the overhaul. - Schneider PacDrive3 system with Pac2Touch - Machine paintwork RAL 9007 - Linear translator with: o Lowering unit in the punching station o Good blister outlet below the punch with slide rails o Individual vacuum translator o Individual ejection with ejection counter control o Collection belt with separate drive o Transfer belt o Good blister clearer when the following machine is at a standstill - CE conformity with declaration of conformity - Two sets of operating manuals

Year of construction: 1998, Condition: used, Rotary tablet press Horn 36 / EU BB 1 Number of station 36 BB=19 2 Max.Tablet dia. Round mm 13 Shaped mm 14 3 Max. tablet Thickness mm 8,5 4 Max. main compression force t 8 5 Machine Dimension mm 1.250 x 1.000 x 1850 Deb Hl T Djk E E Hxj Ueut

Condition: refurbished (used), Dear Sir or Madam, we have decided to sell our CoBall mill MSM-50, built in 1983. In 2022, the following was renewed: • All parts powder-coated • All bearings, seals replaced (original Fryma Kuruma parts) • New stator (original Fryma Kuruma) • VEM three-phase motor in Ex tc IIIC T125°C Dc Type: IE3-W43R 225 M4 Ex II 3D TPM VL WE HW 45 kW, 1475 rpm, 400V, Dr., 50 Hz, IP 55, Iso F Duob Hljvvhl Ue T D Ujt • Zirconia grinding balls (ATM-Ceram 2.2 mm) Since the restoration, only around 4 tons of nougat cream have been produced with it. However, it turned out that another machine was more suitable for our application (viscosity too high). We also add a second, rarely used stator and a tested, functioning Danfoss frequency converter 45kW. The control is easy to implement with the Danfoss frequency converter.

Condition: excellent (used), Year of construction: 2012, Stainless steel mixing tank Deb Hl T Dst Iu Sbe Ueut 105 liters -1 +3bars double jacket Bottom agitation / 0.25kW motor

Year of construction: 2015, Condition: excellent (used), Clean Air Workbench Heraguard HPH 15 Thermo Scientific Used Location Cologne Duob Hleiv S Ags T D Ujt regularly serviced Laboratory resolution various microscopes and other equipment gladly

Condition: refurbished (used), Year of construction: 1985, Full Refurbishment in 2015. This is a continuously operating machine designed for high pressure compacting of dry powder and crystalline materials. It has a maximum throughput of ca. 250 kg/hour, depending on product type. All contact parts are manufactured from high-grade 316-L Stainless Steel. The machine is fitted with an updated Siemens SIMATIC OP7 operator panel. Manufacturer: Hosokawa Floor Space: 380 x 240 x 280 cm Debevmy Ehj Hl T D Ueut

Year of construction: 1993, Condition: excellent (used), Scale area: 300 g Temperature range: 10° - 40° C Electrical connection: 220 V, 50 Hz Djb Hl Teip Np Rj D Usut

Year of construction: 2008, Condition: good (used), Double-shell tank, temperature maintenance with electric resistance Capacity: 1000 liters (max. weight 1100kg) Duob Hl T Dot Iup Hs Ust Max. permissible pressure: -1/ 1 bar Test pressure 1.5 bar Max. time allowed: 50 °C Minimum time: 20 °C

Year of construction: 2012, Condition: excellent (used), CyBIO Felix 305015-100-24 Dsb Hjiv S Eqel T D Usut Pipetting robot year of construction 2012

Year of construction: 2004, Condition: excellent (used), Scale area: 1500 g Temperature range: 5° - 40°C Dsb Hl T Dsip Npxo Usut Electrical connection: 220 V, 50 Hz

Year of construction: 2003, Condition: used, Scale area: 1500 g Deb Hsip Nnwsl T D Uout Temperature range: 5° - 40°C Electrical connection: 220 V, 50 Hz

Year of construction: 2006, Condition: excellent (used), The sieve machine is designed for the homogenise seiving of dry and fine products and to the reduction of the oversize particles to the desired size with help of breakers. Size of sieve (cylindrical): different size possible Sieve insert diameter: 80 mm Dusb Hl T Dod H Sdqo Uet Sieve length: 110 mm Output approx.: 20-100 kg/h Motor power: 0,55 kW Motor speed: 3000 rpm Adjustable speed: 500-3000 rpm Breackers are incerted for reduction of oversize particles.

Year of construction: 1988, Condition: good (used), Second-hand stainless steel pressure STAWAG container 30 L (brewing keg) Year of manufacture: 1988 Producer: STAWAG Useful volume: 30 L Total Ø: 400 x 370 mm Duob Hl T Djb Tt I As Ujt Test pressure: 4,5 bar Operating pressure: 3 bar Operating temperature: 130 °C

Year of construction: 1987, Condition: ready for operation (used), Second-hand stainless steel pressure STAWAG container 100 L/26 gallons (brewing keg) Duob Hl T Dedyqacs Uot Year of manufacture: 1987 Producer: STAWAG Useful volume: 100 L Total Ø: 400 x 950 mm Test pressure: 4,5 bar Operating pressure: 3 bar Operating temperature: 130 °C Condition: excellent