Used furnaces for sale (64)

Condition: like new (used), Year of construction: 2014, functionality: fully functional, Offer Plan: No. A8 28 441 Hfedpfjx Dhrmox Aftor Internal dimensions: width 1,500 mm – height 1,740 mm – length 2,500 mm Working temperature: 380 to 420°C. Maximum operating temperature: 450°C / air. TEMPERATURE HOMOGENEITY Homogeneous volume dimensions: width 1,300 mm – height 1,440 mm – length 2,200 mm Temperature homogeneity guaranteed: ±5°C within the homogeneous volume when it is at an average temperature of 420°C. Measurements taken in the empty chamber under stabilized thermal conditions. Slightly higher temperatures are expected near the walls. At floor level, the temperature will be approximately 80°C. A standard concrete floor is sufficient. FLOOR Constructed from aluminized steel sheet placed over 60 mm thermal insulation. This floor is equipped with embedded running rails (supplied by the customer). ACCESS DOOR TO THE INTERNAL VOLUME Number of doors: 1 Type: double-leaf, hinged on the right. DOOR SEAL Refractory fiber gasket. VENTILATION Horizontal air circulation. Number of units: 2. Type: centrifugal fan. Construction: mild steel. Individual air flow: 6,600 m³/h. Drive motor: brand A.B.B. or LEROY SOMER. HEATING Type: natural gas with combustion gas recirculation. Total power: 90 kW. Number of heating zones: 1 Burner type: modulating burner by WEISHAUPT, compliant with EN 746-2 standard. TEMPERATURE CONTROL Number of controlled zones: 1. Controller: EUROTHERM microprocessor-based PID controller. Safety: Torque break safety device. Relay output for contactor control. Cabinet equipment includes: - main switch - multiposition switches to prevent incorrect operation during start-up - transformer for control circuits - fuses for power and control circuits - contactors for the heating system - circuit breakers and contactors for motor control - panel switches - indicator lights - control and regulation instruments - CE marking will be affixed to the machine (subject to compliance with safety instructions) - A certificate of conformity or incorporation will be supplied by SAT.

Year of construction: 2018, operating hours: 200 h, condition: like new (used), functionality: fully functional, machine/vehicle number: 908011821811131, The oven was purchased for annealing aluminium parts but can also be used for powder coating curing. The equipment is lightly used with less than 200 operating hours. Maximum achievable temperature: 350℃ (temperature is adjustable as required). Dimensions: 2x2x2m. The unit is equipped with a hot air collector and exhaust via a ventilation duct. Specially adapted transport trolleys are included. Hfedpfx Afjx H Rxwotjr

Condition: new, ⭐⭐⭐⭐⭐ Rated 5.0 – Trust the professionals! ⚡ Top service – Delivered super-fast – Great customer support! ⚡ ✈️ Delivery in just 4-6 weeks! ✈️ ✅ Energy efficiency class A+++ – Save on operating costs permanently! ✅ Important note: If you would like to receive a quote for an automatic powder coating system, please use the powder coating system configurator on the homepage of our website. 💸 Preserve liquidity – invest wisely! We offer flexible financing options such as leasing, hire purchase, or warranty packages so you can realize your investment without compromise. 📞 Contact us today – we will provide you with personalized, solution-oriented advice! ⏱️ FASTEST delivery time on the market – directly from the manufacturer! Hsdpfx Afegf A Shetsfr ✨ Benefit from our price and quality advantage ✨ Rely on 40 years of experience in surface coating technology 🔥 UML-LINE – Continuous curing ovens for powder coating and liquid paint 🟢 Optimized for automated systems 🟢 Continuous operation for maximum efficiency 🟢 Individually configurable – space-saving design 🟢 Minimal heat loss thanks to air curtains and air breakers 🟢 Heating system available: Gas | Diesel | Electric 🟢 Indirect heating – for maximum safety and perfect curing 🟢 Fast assembly thanks to modular design 🟢 Manufactured according to current EU standards for safety, insulation, and automation 🟢 Optionally with automatic doors (electric/pneumatic) 🟢 Ideal for step-by-step systems ☀️ 2-year warranty – quality you can rely on! Request a quote now and secure a production advantage! 🔧 Made by PROTON Maschinenbau GmbH – Quality that lasts.

Year of construction: 2017, condition: like new (used), Manufacturer: Nabertherm (Germany) Model: NRA 25/06 Year of manufacture: 2017 Serial number: 211983 Condition: Used, in excellent technical condition (has been serviced) Equipment: Fume extraction hood, built-in recirculation fan Technical Specifications Working chamber dimensions (W×D×H): 225 × 500 × 225 mm Usable chamber volume: 25 liters Hfjdpfx Ajx Encwoftor Maximum temperature: up to +650 °C Temperature uniformity: ±5 °C within the working area External dimensions (W×D×H): 750 × 1700 × 1800 mm Control system: Controller P470, with data logging (NTLog Basic, USB) Gas system: Use of protective gas possible (inert/reactive) Vacuum: Operation under vacuum possible, final pressure down to 5 mbar Cooling: Water cooling for door (connection of a system required) Construction: Stainless steel housing, retort made of steel 1.4571, fan for uniform temperature distribution The machine can be inspected near Gießen by appointment. We will load onto your truck. The buyer is responsible for transport. Technical data, accessories, and description of the machine are non-binding.

Year of construction: 1993, condition: good (used), machine/vehicle number: 86317, Offer 25335 Technical specifications: - Nominal / continuous temperature, stepless: up to 1280 °C Hjdpfx Ajx D U Eyeftsfr - Three-sided heating (bottom and sides) - Temperature control via NABERTHERM Controller C 19 - Drive: 400 V / 5.5 kW - Internal dimensions approx.: W 250 x H 140 x D 350 mm - Usable volume: 11 L - Base frame: W 900 x H 900 x D 950 mm - Required space approx.: W 800 x H 600 x D 750 mm - Weight approx.: 80 kg

Condition: like new (used), Used only five times, like new. Hfjdpfox Ena Aox Aftsr Maximum temperature: Tmax = 1100 °C. • Internal chamber dimensions: 230 × 240 × 170 mm (W × D × H). • Chamber volume: 9 liters. • External dimensions of the furnace (with doors closed): approx. 415 × 455 × 515+240 mm (W × D × H – "+240" indicates additional space with the lift door open). • Rated power / supply: ~ 3.3 kW (or 3.0 kW depending on version), single-phase 230 V 1/N/PE (or 400 V 3/N/PE depending on configuration).

Year of construction: 1992, condition: used, max. temperature 1100 Grad Hsdpfx Asw Rrf Ssftefr size of opening ca. 250 x 120 mm depth of chamber ca. 290 / 310 mm heating capacity 2,7 kW control "Thermocomputer TC 5040"

Condition: defective spare-parts repository (used), Year of construction: 2009, operating hours: 2,000 h, functionality: limited functionality, machine/vehicle number: 870420, Electrically heated recirculation oven. Control system is defective. Repair offer is available. The control system needs to be repaired and the seals need to be replaced. Dimensions: width 2700 x length 2500 x height 1200 mm. Usable volume: 7.4 m3. Steam chamber: 10 m3. Heating capacity: 180 kW. Maximum temperature: 600°C. Max. air volume flow: 5000 m3/h. The oven also features a car bottom for loading/unloading and a wide, split door. The oven has seen little use. It is currently dismantled and in storage. Hsdpfxexnx E Ss Aftefr

Year of construction: 2025, condition: new, ⭐⭐⭐⭐⭐ (5.0) 58 ratings ⚡️ Top service ⚡️ Fast delivery ⚡️ Great support! ✈️ shipping : 30-days delivery ✈️ ✅✅✅Energy class A+++✅✅✅ EXCL. VAT & SHIPPING* ►►Buy It Now◄◄ ✳️Keep your liquidity! We offer a variety of financing models to ensure your investment has the best chance of success. Contact us today to learn more about our hire-purchase, warranty or lease programs. ✳️ Hsdpfx Aoghf R Usftefr ➖➖➖➖➖ ►►►⌛⏰ FASTEST delivery time❗ ⌛⏰►►► ✨✨Buy directly from the manufacturer and secure the price and quality advantage!✨✨ Benefit from Proton's 40 years of experience in surface coating technologies. ➖➖➖➖➖ ☘️Eco-Friendly☘️⚡️Green Energy⚡️☘️ ⭐ Powder oven with gas or diesel heating - BOXLINE 15-3025 ✔️Internal dimensions : 1500*3000*2100 ✔️External dimensions: 1780*4000*2500 ✔️ Volume: 9 m³ ✔️ Heating capacity: 90,300 Kcal/h ✔️ Circulating air flow rate (fan) : 6,800 [M³/H] ✔️ Power of the circulating air fan: 2.2 [KW/H] ✔️ Digital heat control Temperature continuously adjustable up to 220°C ✔️ Sandwich panels Inside: 1mm galvanized steel, Outside: 1mm powder-coated steel ✔️ Adjustable air outlet openings and air circulation channels for homogeneous air distribution ✔️ Adjustable curing temperature, curing time and exhaust fan function ✔️ A beep will sound at the end of the curing time ✔️ Insulated door with special locking systems ✔️ Insulation: 140mm Rockwool. Walls: 140mm (50mm rockwool and 100mm fiberglass) ✔️ Type of heating: Indirect heating ✳️Functional principle✳️ This oven is intended for heating powder coated parts. The paint polymerizes at a temperature of around 200ºC (depending on the type of paint used) and forms a film on the surface of the metal. The temperature control in the oven is carried out by the control unit, which receives a signal from the temperature sensor in the oven. ✳️Oven Body✳️ The body of the polymerization furnace consists of heat-insulating panels that are inserted upright into each other and glued together with a heat-resistant sealant. Conveyor distances to the oven door channels can be left if desired. Optionally, it can be made with pivoting double doors. ✳️Heat exchanger✳️ The heat exchanger is installed in the side part of the polymerization furnace body. The internal structure and materials of the heat exchanger are designed in such a way that the temperature in the furnace can be increased to 230 ° C, and the temperature difference at various points is the allowable ones Heat exchanger manufactured from 3 mm. AISI310 Quality STAINLESS STEEL ✳️Circulation fan✳️ Air circulation in the oven is carried out by four circulation fans with insulated chassis. Blade air propellers are often used in circulation fans. ✳️Digital fully electronic temperature controller✳️ ✳️Exhaust fan✳️ It is used to suck in and blow out the gases produced during the polymerisation of the powder in the furnace. If necessary, the exhaust fan can work continuously after a certain period of time or turn on automatically from time to time. ⭐Follow us for new campaigns⭐ ☀️ 2 YEAR WARRANTY ☀️

Condition: used, Year of construction: 2007, functionality: fully functional, machine/vehicle number: 09000014, power: 127 kW (172.67 HP), total height: 3,400 mm, total length: 4,000 mm, total width: 2,470 mm, overall weight: 6,500 kg, Electrically heated chamber oven with air circulation and horizontal air flow. Internal dimensions: width 1500mm x depth 3500mm x height 1000mm Hjdeu H Actspfx Aftjfr External dimensions: width 2470mm x depth 4050mm x height 3400mm Usable oven space: 5.25 m³ Electrical connected load approx. 127 KW Working temperature: 400 c° Oven temperature max. 450 C° High floor loading capacity Temperature recorder for 6 measuring points JUMO Holding time control Electrical temperature controller with digital actual and setpoint display Oven is immediately ready for use

Year of construction: 1966, condition: used, machine/vehicle number: 6498, Article number: MA1020 Manufacturer: Naber Art: 45 S Year: 1966 Machines-Nr.: 6498 Taxes: Naberterm Hfsdpsdd Rw Esfx After Length [mm]: 1000 Width [mm]: 750 Height [mm]: 700 Weight (kg]: CA. 120) Rated power: 380V / 6 KW Table size LxW: Internal dimensions: 230 X 230 X depth 300 mm

Year of construction: 1994, condition: used, max. temperature 1100 Grad Hsdpfx Aethr Nceftjfr voltage 230 V output 3 kw range - high tensile Innen 295x230x125 mm

Condition: not inspected (used), functionality: unexamined, overall weight: 400 kg, inner dimension height: 230 mm, inner dimension length: 600 mm, inner dimension width: 300 mm, No minimum price – guaranteed sale to the highest bidder! The machine is being auctioned due to a business closure. Placing a bid obligates timely collection between 26/01/2026 and 29/01/2026! TECHNICAL DETAILS Internal dimensions: 600 x 300 x 230 mm Hfodpfx Aoxqnzboftor MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 900 x 900 x 1,700 mm Weight: 400 kg

Year of construction: 2019, operating hours: 1 h, condition: as good as new (ex-display), Air circulation oil / gas chamber furnace model SOS 80 O Exhibition machine Technical data: Usable space dimensions: Width approx. 1200 mm Height approx.: 1800 mm Depth approx.: 3000 mm trolley on request material Housing inside: Sheet steel 0,8 mm FAL welded or riveted tightly Outside housing: sheet steel 0.8 mm Base plate sheet steel 1.5 mm Painting: RAL 1013, as standard, powder coated Insulation material: Mineral wool Insulation thickness: walls - 160 mm ceiling: up to 240 mm, 100 kg/m3 dense Performance data: Heating mode: oil Heating capacity: approx. 80 KW Hedpfxsc Nbito Aftefr 1 oil burner a' 80 kW Total connected load: approx. 5,4 KW Temperature range: up to 250°C, infinitely variable Changes and errors in the technical data, and prices as well as subject to prior sale.

Condition: new, fuel type: electric, tank capacity: 1,000 l, continuous power: 14 kW (19.03 HP), total length: 1,000 mm, total width: 1,000 mm, total height: 1,000 mm, ⭐⭐⭐⭐⭐ (5.0) ⚡️ Top Service ⚡️ Fast Delivery ⚡️ Great Support! ✈️ Plus shipping costs – Shipping available upon request. Fast delivery: Only 4 weeks after receipt of payment! ➖➖➖➖➖ ✳️Maintain your liquidity! We offer a variety of financing models to ensure your investment has the greatest chance of success. Contact us today to learn more about our hire purchase, warranty, or leasing programs. ➖➖➖➖➖ Hjdpfowfpp Eex Aftsfr ✨✨Buy directly from the manufacturer and secure the price and quality advantage!✨✨ ➖➖➖➖➖ ⭐ Powder furnace with electric heating - MATOVENB-101010 ✔️ Internal dimensions: 1000 mm L * 1000 mm W * 1000 mm H ✔️ External dimensions: 1500 mm L * 1300 mm W * 1900 mm H ✔️ Electric heating output: 12 kW/h ✔️ Fan: 1,500 m3/h 80 mm SS ✔️ Recirculation fan output: 0.75 [kW/h] ✔️ Total 14 kW/h +- 10% ✔️ Digital heat control with continuously adjustable temperature up to 220°C ✔️ Sandwich panels: Interior: 1.2 mm galvanized steel, exterior: 1.2 mm powder-coated steel ✔️ Curing temperature, curing time, and exhaust fan function are adjustable ✔️ A beep sounds at the end of the curing time ✔️ Insulated door with special locking systems ✔️ Insulation: 150 mm (50 mm rock wool and 100 mm fiberglass) ✔️ Control panel: 1 🔥 MATOVENB-101010 – Your versatile industrial oven for drying and curing processes! 🔥 Whether powder coating, wet paint, plastics processing, or other thermal processes – the MATOVENB-101010 is your reliable solution for professional drying and curing processes up to 230°C! 🌡️ 🚚 Maximum loading flexibility • Use with a mobile workpiece trolley possible • Optionally with a loading rack system for small batches ⚙️ Intelligent control – just the way you need it ✅ PID control (optional) for precise temperature control ✅ Touchscreen control panel & smartphone control 📱 (optional) ✅ Weekly & monthly reports at the touch of a button (optional) ✅ Timer function: freely programmable from 10 minutes to 24 hours ⏲️ ✅ Automatic shutdown after the end of the process ♨️ Ramp heating mode (optional) Precisely control the temperature profile and holding times, e.g. E.g.: • Reach target temperature within a defined time • Maintain desired time • Controlled cooling to target temperature • Automatic notifications of process events 🛡️ Safety is our priority 🟢 Safety sensor to prevent overheating 🟢 Automatic shutdown in the event of a fault 🟢 Acoustic warning signals in the event of errors 🟢 Solvent and fume extraction via automatic venting ⚡ Customized energy and heating system 🔌 Selectable heating systems: Gas, Diesel, Electric, or Hybrid (two combined heating modes) (optional) 🔥 Also available with an extension up to 400°C for high-temperature processes (optional) 🧠 No repeated settings necessary! The furnace saves your process parameters – batch by batch. This saves you time and avoids errors. 📢 And best of all: If you have special requirements – we also build customized furnaces according to your specifications! Contact our team of experts for a personalized consultation! Request now – Make your business fit for the future! ⭐Follow us for new campaigns⭐ ☀️ 2-YEAR WARRANTY ☀️

Year of construction: 2001, condition: good (used), 1 used hardening furnace Manufacturer: Nabertherm, Type N 321 Serial Number: 160897, Year of manufacture: 2001, Max. temperature: 1,200°C, Connected load: 400V, 47 kW Internal dimensions: 750 x 1100 x 400 mm Usable volume: 320 liters Weight: approx. 1.6 t Dimensions: Hedpjxpf I Nofx Aftsfr Length approx. 2 m, width approx. 1.5 m, height approx. 2 m,

Year of construction: 2009, condition: ready for operation (used), functionality: fully functional, empty load weight: 1,400 kg, loading space volume: 2.78 m³, inner dimension height: 1,500 mm, inner dimension width: 1,600 mm, TECHNICAL DETAILS Maximum temperature: 190 °C Interior dimensions Internal usable volume: 2.78 m³ Internal dimensions (H x W x D): 1,500 x 1,600 x 1,100 mm Recirculation fan speed adjustable range min.: 50% Recirculation fan speed adjustable range max.: 120% Minimum exhaust air volume flow (exhaust mode): 360 m³/h Reduced exhaust air volume flow (recirculation mode): 90 m³/h Air change rate: 5 times per 300 sec. Total steam chamber volume: 4.5 m³ MACHINE DETAILS Weight: approx. 1,400 kg Hsdexurx Sopfx Aftofr Filter class: H13 EQUIPMENT S!MPATI software Vacuum connection Cleanroom certification

Year of construction: 2004, condition: excellent (used), functionality: fully functional, industrial oven VMD GRYGOV TKS 300°C 1.95 m x 2.4 m x 1.5 m internal dimensions air-mixed oven drying cabinet manufacturer: HV VMD GRYGOV TKS 080 EKZVO Year of manufacture 2004 Operating dimensions mm 1950 width x 2400 height x 1520 depth Ht Industry Programmable PID temperature controller Hsdpfew Rb Snox Aftefr volume: 7.2 m3 Temperature max. 300 ° C Air circulation: up to 2x 6120m3/h 2pcs heat-resistant radial fans 2x 1.5kw VNG315-4-1.5 Power supply Electric Nominal power 83 kW Voltage 380 V Frequency 50-60 Hz external dimensions: length:3400mm width: 2560+300mm height:3100mm door type: 2 door -Ex lock Warming up time 15-30 minutes (180° C) Homogenity

Year of construction: 2002, condition: not inspected (used), functionality: unexamined, overall weight: 150 kg, inner dimension height: 140 mm, inner dimension length: 320 mm, inner dimension width: 250 mm, temperature: 1,100 °C, machine/vehicle number: 168493, No reserve price – guaranteed sale to the highest bidder! The machine is being auctioned as part of a business liquidation. Submitting a bid obligates timely collection between 26.01.2026 and 29.01.2026! TECHNICAL DETAILS Hsdpfxjxqny De Aftsfr Max. temperature: 1,100 °C Internal dimensions: 320 x 250 x 140 mm MACHINE DETAILS Electrical data Operating voltage: 230 V Frequency: 50 / 60 Hz Rated current: 13 A Connected load: 3.0 kW Dimensions & Weight Dimensions (L x W x H): 600 x 550 x 1,500 mm Weight: 150 kg

Condition: new, ✈️ Plus shipping costs – Shipping available upon request.✈️ Fast delivery: Only 4 weeks after receipt of payment! ✅✅✅Energy class A+++✅✅✅ ✅ Plug & Play system – Delivered fully assembled, ready to use immediately! ✳️ Maintain your liquidity! We offer a variety of financing models to ensure your investment has the best chance of success. Contact us today to learn more about our hire purchase, warranty, or leasing programs. ☘️Environmentally friendly☘️⚡️Green energy⚡️☘️ ⭐ Powder furnace with electric heating - MATOVENB-151830 ✔️ Internal dimensions: 3000 mm L * 1500 mm W * 1800 mm H ✔️ Electric heating output: 42 kW/h ✔️ Fan: 3,000 m3/h 80 mm SS ✔️ Recirculation fan output: 1.5 kW/h ✔️ Total 45 kW/h +- 10% ✔️ Digital heat control with continuously adjustable temperature up to 220°C ✔️ Sandwich panels inside: 1.2 mm galvanized steel, outside: 1.2 mm powder-coated steel ✔️ Adjustable curing temperature, curing time, and exhaust fan function ✔️ An audible signal sounds at the end of the curing time ✔️ Insulated door with special locking systems ✔️ Insulation: 150 mm (50 mm rock wool and 100 mm fiberglass) 🔥 MATOVENB-151830 – Your versatile industrial oven for drying and curing processes! 🔥 Whether powder coating, wet paint, plastics processing, or other thermal processes – the MATOVENB-151830 is your reliable solution for professional curing and drying processes up to 230°C! 🌡️ _____ 🚚 Maximum loading flexibility • Compatible with ceiling rail systems • Can be used with a mobile workpiece trolley • Ground-level rail guide – convenient and safe access • Optionally with a shelf system for small batches _____ ⚙️ Intelligent control – just the way you need it ✅ PID control (optional) for precise temperature control ✅ Touchscreen control panel & smartphone control 📱 (optional) ✅ Weekly & monthly reports at the touch of a button (optional) ✅ Timer function: freely programmable from 10 minutes to 24 hours ⏲️ ✅ Automatic shutdown after the end of the process _____ ♨️ Ramp heating mode (optional) Precisely control the temperature profile and holding times, e.g. E.g.: • Reach target temperature within a defined time • Maintain desired time • Controlled cooling to target temperature • Automatic notifications of process events _____ 🛡️ Safety is our priority 🟢 Safety sensor to prevent overheating 🟢 Automatic shutdown in the event of a fault 🟢 Acoustic warning signals in the event of errors 🟢 Solvent and fume extraction via automatic venting _____ ⚡ Customized energy and heating system 🔌 Selectable heating systems: Gas, diesel, electric, or hybrid (two combined heating modes) (optional) 🔥 Also available with an extension up to 400°C for high-temperature processes (optional) _____ 🧠 No repeated settings necessary! The furnace saves your process parameters – batch after batch. This saves you time and avoids errors. _____ Hfedpewc E Hzofx Aftor 📢 And the best part: If you have special requirements – we also build customized furnaces according to your specifications! Contact our team of experts for personalized advice! _____ ☀️ 2-YEAR WARRANTY ☀️

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, industrial oven VMD GRYGOV TKS 300°C /ct2252b/ 1.95 m x 2.4 m x 1.5 m internal dimensions air-mixed oven drying cabinet manufacturer: HV VMD GRYGOV TKS 080 EKZVO Year of manufacture 2004 Hedpsxhnn Njfx Aftjfr Operating dimensions mm 1950 width x 2400 height x 1520 depth Ht Industry Programmable PID temperature controller volume: 7.2 m3 Temperature max. 300 ° C Air circulation: up to 2x 6120m3/h 2pcs heat-resistant radial fans 2x 1.5kw VNG315-4-1.5 Power supply Electric Nominal power 83 kW Voltage 380 V Frequency 50-60 Hz external dimensions: length:3400mm width: 2560+300mm height:3100mm door type: 2 door -Ex lock Warming up time 15-30 minutes (180° C) Homogenity

Condition: not inspected (used), functionality: unexamined, overall weight: 300 kg, inner dimension height: 300 mm, inner dimension length: 440 mm, temperature: 650 °C, machine/vehicle number: 0001614, No minimum price – guaranteed sale to the highest bidder! The machine is being auctioned due to business closure. Placing a bid obligates timely collection between 26/01/2026 and 29/01/2026! TECHNICAL DETAILS Rated temperature: 650 °C Internal dimensions: 440 x 300 x 300 mm MACHINE DETAILS Electrical Specifications Operating voltage: 380 V Frequency: 50 Hz Rated current: 7 A Hfedpfoxqfwmsx Aftor Dimensions & Weight Dimensions (L x W x H): 1,000 x 700 x 1,600 mm Weight: 300 kg

Year of construction: 2024, condition: new, ⭐⭐⭐⭐⭐ (5.0) ⚡️ Top service ⚡️ Fast delivery ⚡️ Great support! ✈️ Shipping : 30-day delivery ✈️ ✅✅✅Energy class A+++✅✅✅ ►►Buy It Now◄◄ ✳️Keep your liquidity! We offer a variety of financing models to ensure your investment has the best chance of success. Contact us today to learn more about our hire-purchase, warranty or lease programs. ✳️ ➖➖➖➖➖ ►►►⌛⏰ FASTEST delivery time❗ ⌛⏰►►► ✨✨Buy directly from the manufacturer and secure the price and quality advantage!✨✨ Benefit from Proton's 40 years of experience in surface coating technologies. ➖➖➖➖➖ ☘️Eco-Friendly☘️⚡️Green Energy⚡️☘️ Hfedpfx Aoiiwa Doftjr ⭐ Powder oven with electric heating - ELECLINE 12-3019 ✔️ Volume: 5.5m³ ✔️ Electrical heating power : 36 Kw/h ✔️ Circulating air flow rate (fan) : 5,000 [M³/H] ✔️ Power of the circulating air fan: 1.5 [KW/H] ✔️ Digital heat control Temperature continuously adjustable up to 220°C ✔️ Sandwich panels Inside: 1mm galvanized steel, Outside: 1mm powder-coated steel ✔️ Adjustable air outlet openings and air circulation channels for homogeneous air distribution ✔️ Adjustable curing temperature, curing time and exhaust fan function ✔️ A beep will sound at the end of the curing time ✔️ Insulated door with special locking systems ✔️ Insulation: 140mm Rockwool. Walls: 140mm (50mm rockwool and 100mm fiberglass) ✔️ Type of heating: Indirect heating Principle of operation This oven is intended for heating powder coated parts. The paint polymerizes at a temperature of around 200ºC (depending on the type of paint used) and forms a film on the surface of the metal. The temperature control in the oven is carried out by the control unit, which receives a signal from the temperature sensor in the oven. A digital temperature sensor is installed on the furnace control unit. ☀️We have CE certificates for all our machines and ATEX certificates for the necessary machines.☀️

Condition: new, ✈️ Plus shipping costs – Shipping available upon request.✈️ Fast delivery: Only 4 weeks after receipt of payment! ✅✅✅Energy class A+++✅✅✅ ✅ Plug & Play system – Delivered fully assembled, ready to use immediately! ✳️ Maintain your liquidity! We offer a variety of financing models to ensure your investment has the best chance of success. Contact us today to learn more about our hire purchase, warranty, or leasing programs. ☘️Environmentally friendly☘️⚡️Green energy⚡️☘️ ⭐ Powder furnace with electric heating - MATOVENB-101610 ✔️ Internal dimensions: 1000 mm L * 1000 mm W * 1600 mm H ✔️ Electric heating capacity: 18 kW/h ✔️ Fan: 1,500 m3/h 80 mm SS ✔️ Recirculation fan capacity: 0.75 [kW/h] ✔️ Total 45 kW/h +- 10% ✔️ Digital heat control: Continuously adjustable temperature up to 220°C ✔️ Sandwich panels inside: 1.2 mm galvanized steel Exterior: 1.2 mm powder-coated steel ✔️ Adjustable curing temperature, curing time, and exhaust fan function ✔️ An audible signal sounds at the end of the curing time ✔️ Insulated door with special locking systems ✔️ Insulation: 150 mm (50 mm rock wool and 100 mm fiberglass) 🔥 MATOVENB-101610 – Your versatile industrial oven for drying and curing processes! 🔥 Whether powder coating, wet paint, plastics processing, or other thermal processes – the MATOVENB-101610 is your reliable solution for professional curing and drying processes up to 230°C! 🌡️ _____ 🚚 Maximum loading flexibility • Compatible with ceiling rail systems • Optionally with insert shelf system for small batches _____ ⚙️ Intelligent control – just the way you need it ✅ PID control (optional) for precise temperature control ✅ Touchscreen control panel & smartphone control 📱 (optional) ✅ Weekly & monthly reports at the touch of a button (optional) ✅ Timer function: freely programmable from 10 minutes to 24 hours ⏲️ ✅ Automatic shutdown after the end of the process _____ ♨️ Ramp heating mode (optional) Precisely control temperature progression and holding times, e.g. E.g.: • Reach target temperature within a defined time • Maintain desired time • Controlled cooling to target temperature Hodpfx Ajwd Nwasftefr • Automatic notifications of process events _____ 🛡️ Safety is our priority 🟢 Safety sensors to prevent overheating 🟢 Automatic shutdown in the event of a fault 🟢 Acoustic warning signals in the event of errors 🟢 Solvent and fume removal via automatic venting _____ ⚡ Customized energy and heating system 🔥 Also available with an extension up to 400°C for high-temperature processes (optional) _____ 🧠 No repeated settings necessary! The furnace saves your process parameters – batch by batch. This saves you time and avoids errors. _____ 📢 And best of all: If you have special requirements – we also build customized furnaces according to your specifications! Contact our team of experts for a personalized consultation! _____ ☀️ 2-YEAR WARRANTY ☀️

Condition: new, Year of construction: 2025, 🔥 Special Offer: 20% DISCOUNT on all Matoven industrial furnaces! 🔥 Take advantage of our exclusive promotional discount: October 20 to December 19, 2025 – 20% off all Matoven models from Proton Maschinenbau. Top-quality “Made in Germany,” trusted in operation in over 30 countries worldwide. ✅ Key features of Matoven industrial furnaces: Energy Efficiency Class A+++ – maximum efficiency, minimal operating costs Plug & Play system – fully assembled, ready for immediate operation Fast delivery – just 6 weeks after payment receipt Digital temperature control – infinitely adjustable up to 220 °C Optional smart features – touchscreen, app control, timer programs Ramp heating mode (optional) – precise heating, holding, and cooling cycles Optimal insulation – 150 mm for maximum heat retention Flexible heating systems – available as electric, gas, diesel, or hybrid (optional) Environmentally friendly – energy-efficient & sustainable technology Versatile loading – compatible with rail systems and trolleys Maximum safety – overheat protection, emergency shutdown, venting system Process storage – for repeatable results & time savings Hfodpfsxpvbajx Aftjr Custom designs available – we build to your specifications 2-year warranty included ✈️ Shipping costs not included – shipping available on request 📦 Secure your production capacity with a reliable industrial furnace from Proton.