Condition: good (used), - Electronic 11-spindle edge sanding machine for flat edges and miters, running direction right-left - Edge angle 0 to 45 degrees - Type: TL 11 AV - Serial number 497-01 - Configuration of the machine Duelqsrhilxoucbfot o 2 diamond wheels 150 mm for edges o (2) polishing wheels (150 mm) o (2) polishing wheels (150 mm) o (1) Cerium impregnated disc o (1) Diamond wheel 150 mm for rear seam o (1) Polishing wheel 150 mm for rear hem o (1) Diamond wheel 150 mm for front hem o (1) Polishing wheel 150 mm for front hem

Year of construction: 2021, Condition: as good as new (ex-display), Functionality: fully functional, Vertical infeed transport - Vertical 2600 mm washing machine with drying - Tilting table (behind the washing machine) - Horizontal outfeed transport Pos. 1 Loading station, 250kg With the help of the suction frame, the sheets are taken off the glass rack and they are placed vertically on the tilting table in front of the washing machine. Differences in inclination can be compensated by tilting of the suction frame. The suction frame has a rotating function to collect short formats in upright position and to place them down on the long edge. Light crane Trolley crane with a lift system travelling on rails by hand, which are standing on steel supports. Lift Electrical lifting and lowering, horizontal turning and tilting of loads. Dueletwphwequcbfst Generation of vacuum via vacuum pump system with check and display of the vacuum power. A central operation desk with integrated control buttons allows easy signal activation of the single functions. In case of pressure loss in the dangerous area, it is displayed and acoustical signal is given. Pos. 2 Vertical Inlet Transport WM The vertical transport serves as inlet transport in front of the washing machine. In horizontal position, the glass sheets are placed on Vulcan transport rollers. In vertical position transport rollers with Perumaan rings are driven via screw wheels. The transport rollers are arranged in drag bearings placed on a solid welded frame. Small glass sheets are placed manually on the transport frame. After placing the glass sheet, the transport is activated by push button. Pos. 3 Vertical Washing Machine with Drying The washing machine body, washing chambers, recirculation vats and the drying nozzles are made entirely of stainless steel. The rubber rings of the transport rollers are resistant to cutting oil. Flat jet spraying nozzles in the pre-rinsing section are fed with city water. Coarse dirt particles removed are directly led into the drain. This reduces contamination of the DI-water circuit for the washing machine. The washing machine is equipped with energy and water saving cascade system. Pre-rinsing section with Flat jet spraying nozzles Washing section with 3 pairs of brushes, 3 vats and 3 pumps Acid section with 1 pair of brushes, 1 vat and 1 pump Drying section with 2 pairs of drying nozzles provide dry edges. Pos. 4 Vertical Inspection Transport with glass Activation Section The transport serves as Activation Section for the glass surface and as Inspection and Storage Transport before the Tilting Table. Drive by a geared motor, A.C., frequency controlled. All the rollers are arranged in drag bearings with a single drive operating pairs of spiral-toothed gear wheels. The transport rollers are vulcanized and ground. Pos. 5 Tilting Table with Horizontal Transport and Vertical Inspection

Year of construction: 2020, Condition: like new (used), Functionality: fully functional, Horizontal glass washing machine TRIULZI SY.LE.2200.4.1+2.4 Dolqev Acd Eoucbfeut Year of production: 2020 Maximum glass working width: 2200 mm Minimum glass size: 150 x 300 mm Glass thickness: 3 - 35 mm Working speed 2 - 7 m/min (by inverter) Washing machine consists of: - inlet conveyor 770 mm long, - pre-washing, - 2 pairs of brushes (4 pcs.), - 2 pairs of air drying knifes (4 pcs.), - 3 water tanks (one with heating), - outlet conveyor 770 mm long. Excellent condition, very little used Good working order, tested As new Available immediately

Condition: good (used), Year of construction: 2007, Functionality: fully functional, Lisec glass cutting line consisting of: stationary double sided automatic loading table with racks ATH-37/26D 2x Glass rack LBS Float glass cutting table with edge deletion and upgraded PC GFB-37/26RE Duslquovfyb Tocbfjt Break out table BTS- 37/26 2x Free fall racks LBS

Year of construction: 2017, Condition: ready for operation (used), A Hegla SF 2518 vertical conveyor for the glass industry is available, weight: approx. 2700 kg. Delotvgq Sjqucbfsut

Condition: used, Complete brickyard facility Delqucbeudi Eaefout

Condition: good (used), - Year of construction: 2014 - Very good condition - Glass thickness: 3 - 25 mm Delqucbsu Sm H Hofsut - Min. glass dimension: 80 x 80 mm - Machine length: 6470 mm - Machine height: 2610 mm - Machine depth: 1110 mm - Weight: approx. 2800 kg - Price on request Price 7.500 €

Condition: used, Year of construction: 2004, Lisec Portal Loader Dujlqucorr Tgaobfet PKL-60/30P SBL60/30KR PKL span 19100 - 19560 mm

Condition: new, Year of construction: 2025, Functionality: fully functional, machine/vehicle number: 2022KL2938, total width: 2,400 mm, total length: 3,400 mm, total height: 910 mm, overall weight: 900 kg, warranty duration: 12 months, • Glass cutting table SDRD 2L PU PP Tilted table which supports the process of manual cutting the glass, product designed and manufactured in Poland Length - 3400 mm Width - 2400 mm Height - 910 mm Breaking bar - 2 pieces in cross arrangement Bars steering - by foot pedals Delquceh Nx R Tebfout Air cushion system - installed Power of fans (air cushion) - 2,2 kW Air cushion system steering - by foot pedals and hand button Tilting of the top - pneumatical Stabilization of tilting - by hydraulic speed controller Support of quick tilting - by to gas springs Pull-out cantilevers of glass loading - yes, manually Covering of the top - grey felt Covering of the circumference - ash slats Wheels - 4 rotary, with increased load Levelling feet - 4 pieces installed Steel construction covering - polyurethane covering Filling of the lower beam in stationary construction - vibrated, fibre reinforced concrete Table available from stock. Our company also delivers worldwide.

Condition: ready for operation (used), A Schwalbach high-frequency welding system for dielectric heating for the glass industry is available. Connected load: 17kVA, generator output: 7kW, frequency: 2712MHz, transmitter tube: 2xTB6/4000, high voltage: 7000V DC, overload cut-off from: 2100mA. Documentation available. On-site inspection is possible. Duslet Uh Agsqucbfjt

Condition: used, Brickyard facility with automatized loading Dslquoudav Ascbfsut

Condition: new, Year of construction: 2025, Functionality: fully functional, total width: 2,400 mm, total length: 3,400 mm, total height: 910 mm, overall weight: 900 kg, warranty duration: 12 months, GLASS CUTTING TABLE - MANUAL - New MODEL: SDRD 2L PU PP Manufacturing year 2025 - brand new We manufacture glass cutting tables in various equipment configurations. Our products are characteristic for top functionality and service life because we processed flat glass and we know what customers expect from these machines. Our tables have been operating for a few years in glass processing plants on 3 continents. Our long-term experience enables us to design a machine whose functionality and quality satisfies the needs of our customers to the fullest extent. TABLE EQUIPMENT: - manually slid supports for vertical loading (covered with replaceable ash trees blocks) - 4 swivelling polyamide castors Ø80 for extreme loads of table movement - 4 adjustable feet for levelling the table in the operation place - table top surface - extremely resistant black felt Duslqucbof Sqffefjt - table top surface circumference covered with milled ash tree strips - 2 steel panels screwed beneath facilitating loading by means of a forklift - bottom base beam filled with vibrated concrete with steel reinforcement and dispersed concrete from polypropylene fibres in order to increase the stability and rigidity of the structure - pneumatic pivoting (the vertical and horizontal levelling of the table top surface) by means of an actuator with a hydraulic speed controller - breaking strips (breakers: longitudinal and transversal) controlled pneumatically by means of pedals mounted on the sliding foot panel with automatic return - an airbag with installed high pressure fan enabling the easy manipulation of heavy panes on the top surface (the fan is activated by means of a pedal on the foot panel and two additional switches mounted on the top surface circuit blow in the air under the panes, reducing friction significantly) - adjustable height of breaking strips sliding from the table top surface. BASIC TECHNICAL DATA: - weight: 900 kg - top surface size: 340 cm x 240 cm - height: 91 cm (adjustable +/- 2 cm) - electrical connection: 16 A 5 pin plug - air connection: standard 7.2 NW - air working pressure: 7 bar - fan power: 2.2 kW - voltage: 400 V 50 Hz DOCUMENTS ATTACHED TO THE MACHINE: - Declaration of Conformity with the applicable machinery standards - CE Marking - UE EMC Declaration - 12 months’ warranty - User’s Manual (in Polish and in English) This product is supplied ready for operation. Our company can also deliver the table within the EU and to other countries.

Year of construction: 2020, Condition: ready for operation (used), Laser power: 10W, Laser type: HyperRapid NX10, Mains voltage: 400V, 60Hz, Phases: L1+L2+L3+N+PE, rated current: 12.5A, peak current: 25A, rated power: 8.65kW, max. power: 17.3kW. Applications: Laser cleaning, laser marking, laser structuring, laser cutting. Machine dimensions X/Y/Z: approx. 1400mm/1400mm/2200mm, weight: approx. 4000kg. Documentation available. Duolquceucw Tvebfjt

Condition: new, Year of construction: 2025, Functionality: fully functional, total width: 1,860 mm, total length: 2,800 mm, total height: 910 mm, overall weight: 600 kg, input current: 16 A, warranty duration: 12 months, GLASS CUTTING TABLE - MANUAL - New MODEL: SDRM 2L PU PP Manufacturing year 2025 - brand new We manufacture glass cutting tables in various equipment configurations. Our products are characteristic for top functionality and service life because we processed flat glass and we know what customers expect from these machines. Our tables have been operating for a few years in glass processing plants on 3 continents. Our long-term experience enables us to design a machine whose functionality and quality satisfies the needs of our customers to the fullest extent. Delod Tamdoqucbfjut TABLE EQUIPMENT: - manually slid supports for vertical loading (covered with replaceable ash trees blocks) - 4 swivelling polyamide castors Ø80 for extreme loads of table movement - 4 adjustable feet for levelling the table in the operation place - table top surface - extremely resistant black felt - table top surface circumference covered with milled ash tree strips - 2 steel panels screwed beneath facilitating loading by means of a forklift - bottom base beam filled with vibrated concrete with steel reinforcement and dispersed concrete from polypropylene fibres in order to increase the stability and rigidity of the structure - pneumatic pivoting (the vertical and horizontal levelling of the table top surface) by means of an actuator with a hydraulic speed controller - breaking strips (breakers: longitudinal and transversal) controlled pneumatically by means of pedals mounted on the sliding foot panel with automatic return - an airbag with installed high pressure fan enabling the easy manipulation of heavy panes on the top surface (the fan is activated by means of a pedal on the foot panel and two additional switches mounted on the top surface circuit blow in the air under the panes, reducing friction significantly) - adjustable height of breaking strips sliding from the table top surface. BASIC TECHNICAL DATA: - weight: 600 kg - top surface size: 286 cm x 186 cm - height: 91 cm (adjustable +/- 2 cm) - electrical connection: 16 A 5 pin plug - air connection: standard 7.2 NW - air working pressure: 7 bar - fan power: 2.2 kW - voltage: 400 V 50 Hz DOCUMENTS ATTACHED TO THE MACHINE: - Declaration of Conformity with the applicable machinery standards - CE Marking - UE EMC Declaration - 12 months’ warranty - User’s Manual (in Polish and in English) This product is supplied ready for operation. Our company can also deliver the table within the EU and to other countries.

Condition: ready for operation (used), Year of construction: 2004, A horizontal, continuous, electric tempering furnace complete with pre-stressing cooler and post-cooling section is available. Total oven length: 19.44m, useful load width: 1250mm, length of tempering station: 15.12m, length of post-cooling station: 4m. Length of loading table: 4m, length of unloading table: 4m, total length of tempering system: 47.19m, including robot: 52m, total width without sound insulation: approx. 6.00m. Glass thickness range: 2.8mm to 10mm, max. glass size: 1250mm/2200mm, min. glass size: 100mm/250mm. Documentation available. Duslqucbjtdwwfefot

Condition: new, Year of construction: 2025, Functionality: fully functional, total width: 1,860 mm, total length: 2,800 mm, total height: 910 mm, overall weight: 300 kg, warranty duration: 12 months, Glass processing / assembly table. Dimensions 280 cm x 186 cm. Table lifted by gas springs. Covered with glass felt. Table on wheels - mobile. We recommend our other products for the glass industry. Delsgk Ay Hoqucbfsut

Year of construction: 2010, Condition: ready for operation (used), A double-sided Busetti glass drilling machine is available. Drilling heads: 2, drilling dimensions X/Y: 1250mm/1450mm, min. drilling diameter: 3mm, max. drilling diameter both drills/with top drill: 130mm/220mm, speed: 4000rpm, max. glass thickness: 38mm. Machine dimensions X/Y/Z: approx. 4500mm/2050mm/2300mm, weight: approx. 1700kg. An on-site inspection is possible. Dslqucjt Sh U Djbfout

Condition: new, Year of construction: 2025, total width: 2,600 mm, total length: 3,400 mm, total height: 910 mm, overall weight: 950 kg, input current: 16 A, warranty duration: 12 months, GLASS CUTTING TABLE - MANUAL - New MODEL: SDRXL 2L PU PP Manufacturing year 2025 - brand new We manufacture glass cutting tables in various equipment configurations. Our products are characteristic for top functionality and service life because we processed flat glass and we know what customers expect from these machines. Our tables have been operating for a few years in glass processing plants on 3 continents. Our long-term experience enables us to design a machine whose functionality and quality satisfies the needs of our customers to the fullest extent. TABLE EQUIPMENT: Duolef Svtkequcbfet - manually slid supports for vertical loading (covered with replaceable ash trees blocks) - 4 swivelling polyamide castors Ø80 for extreme loads of table movement - 4 adjustable feet for levelling the table in the operation place - table top surface - extremely resistant black felt - table top surface circumference covered with milled ash tree strips - 2 steel panels screwed beneath facilitating loading by means of a forklift - bottom base beam filled with vibrated concrete with steel reinforcement and dispersed concrete from polypropylene fibres in order to increase the stability and rigidity of the structure - pneumatic pivoting (the vertical and horizontal levelling of the table top surface) by means of an actuator with a hydraulic speed controller - breaking strips (breakers: longitudinal and transversal) controlled pneumatically by means of pedals mounted on the sliding foot panel with automatic return - an airbag with installed high pressure fan enabling the easy manipulation of heavy panes on the top surface (the fan is activated by means of a pedal on the foot panel and two additional switches mounted on the top surface circuit blow in the air under the panes, reducing friction significantly) - adjustable height of breaking strips sliding from the table top surface. BASIC TECHNICAL DATA: - weight: 950 kg - top surface size: 340 cm x 260 cm - height: 91 cm (adjustable +/- 2 cm) - electrical connection: 16 A 5 pin plug - air connection: standard 7.2 NW - air working pressure: 7 bar - fan power: 2.2 kW - voltage: 400 V 50 Hz DOCUMENTS ATTACHED TO THE MACHINE: - Declaration of Conformity with the applicable machinery standards - CE Marking - UE EMC Declaration - 12 months’ warranty - User’s Manual (in Polish and in English) This product is supplied ready for operation. Our company can also deliver the table within the EU and to other countries.

Condition: ready for operation (used), Year of construction: 2001, A Bottero glass cutting machine is available. Cutting thickness range: 2mm-19mm, max. glass dimensions X/Y: 3650mm/2750mm, weight: approx. 1650kg. On-site inspection is possible. Duolqucbjudinujfjt

Year of construction: 1996, Condition: ready for operation (used), A Forel multi-pane insulating glass production plant with fixed spacer and Swiggel is available. Glass production options: 2-pane/3-pane, layering: coated/uncoated, insulating glass pane dimensions X/Y min./max.: 400mm x 200mm/2500mm x 2000mm, pane thickness range: 12mm-50mm, total system length: 30200mm. System components: 1) Inlet to the washing machine, 2) Washing machine, 3) Outlet from the washing machine, 4) Place spacer on inlet, 5) Place spacer on outlet, 6) Place spacer on outlet, 7) Inlet assembly station, 8) Assembly station, 9) Outlet assembly station, 10) Inlet roller press (no gas filling press), 11) Outlet roller press, 12) Roller tilting table for removal. Documentation available. On-site inspection is possible. Djlqucbougv R Isfsut

Year of construction: 2017, Condition: ready for operation (used), A rotating wall for the glass industry is available. Weight: approx. 1300kg. Delqucbjtvgraefeut

Year of construction: 2000, Condition: ready for operation (used), Max. Glass sheet dimensions X/Y: 6000mm/3210mm, cutting accuracy: +/-0.5mm, cutting speed: 150m/min, weight: approx. 900kg. Documentation available. On-site inspection is possible. Dolqot Uug Seucbfjut

Year of construction: 2016, Condition: ready for operation (used), A Lisec horizontal conveyor field is available. Pressure: 6bar, max. conveyor weight distribution: 50kg/m², weight: approx. 1450kg. Djlotvgq Iequcbfout

Year of construction: 2004, Condition: ready for operation (used), Number of spindles: 7, min. glass dimensions X/Y: 40mm/40mm, min. glass height: 35mm, glass thickness range: 3mm-20mm, bevel angle: 3°-45°, max. bevel size: 50mm, working speed: 0.5m-4.1m/min. The machine is missing maintenance, the rear chain is defective and various minor repairs are required. An on-site inspection is possible. Dujlqsud Suwsucbfjt

Year of construction: 2020, Condition: ready for operation (used), A continuous kiln with rollers suitable for the ceramics and glass industry is available. Clear passage width/height: 700mm/100mm, kiln channel length: 6000mm, cooling zone length: 1600mm, total kiln length: 8000mm, conveying height above floor: 900mm, max. temperature: 850°C, operating temperature: 800°C, total heating capacity: 75kW, number of heating/control groups: 7. Control system: Siemens Simatic HMI, control and automation system: Jumo mTRON 7, operating hours: 23165h. Documentation available. On-site inspection is possible. Duslqucbjt R Tq Iofet