Used other textile machines for sale (68)

Year of construction: 2017, condition: ready for operation (used), Six identical Demsan fabric doubling and winding machines are offered. Max. fabric width: 2000mm, fabric infeed: from roll and in open width, fabric delivery book/roll: 1000mm, double folded, max. operating speed: 60m/min, operating direction: forward, control: Hitech touch panel. Machine dimensions X/Y/Z: 4000mm/3100mm/2600mm, weight: approx. 2390kg. Equipped with fabric tension control, electronic length measuring system with encoder, calibration function, RS-232 interface, end-of-fabric photocell, photocell-controlled fabric catcher and centering system, dancer roller mechanism, Argox thermal printer, photocell-controlled edge guiding system, motorized fabric guide adjustment, AC geared motors, frequency converters and pneumatic opening unit. Four machines were manufactured in 2017, and two machines were manufactured in 2016. Documentation available. Inspection possible by arrangement. Dwedpfx Aszta Eqopwsa

Year of construction: 2023, condition: ready for operation (used), A Herzog two-head square braiding machine is available. Number of carriers 1/2: 12/16, tandem carrier configuration: 8, horn gear diameter: 150mm/200mm, speed 1/2: 175rpm/131rpm, bobbin diameter: 55mm, bobbin height: 130mm, bobbin capacity: 265cm³. Including 2x change gears, 2x double gears, 28x bobbins, 28x thread tension springs, 2x take-off discs, 6x wooden drums, 8x carrier tubes, 2x braiding plates and one carrier guard. The machine has only been operated for a few thousand running meters and is therefore in very good, near-new condition. Documentation available. An on-site inspection is possible. Dwjdpfxezqfx Ds Apwoa

Condition: good (used), Electronically controlled unwinding unit, thread unwinder, yarn winder, thread winder, reel, -Manufacturer: Texmer, Electronically controlled unwinding unit Dwodpfx Apsxyv Uhowea -Type: EGA 2000 EGA-2000-31001271 -Spool weight: max. 40 kg -Quantity: 12x spooling units available, 1x shaft without attachment Price: per piece -Dimensions: 545/255/200 mm -Weight: 13.8 kg/pc.

Condition: good (used), Reel, reel rod, trapezoidal thread spindle, spindle -Reel: Reel rod with quick-release fastener -Type: unfortunately without a type designation Djdpfeykp S Ajx Apwowa -Shaft: Ø 44 mm, dimensions see photos -Dimensions: Ø 98 x 440 mm -Weight: 3.3 kg

Year of construction: 1997, condition: excellent (used), Waste-box collector, waste collector, blower, fan, filter system, radial fan, dust extraction blower, fan, extraction, dust blower, extraction, dust blower, extraction system, dust extraction device, separator, welding fume filter, welding fume extraction, flue gas extraction fan -Dust extraction blower: with filter gases -Monitoring device: for the amount and quality of waste in the waste suction system -for sampling: on teasels or cleaners Dodpfx Apjy Uxmxjwewa -Motor power: 2.2 kW -Speed: rpm -Inlet connection: 1x Ø 300 mm, 2x Ø 100 mm -Dimensions: 1200/800/H1700 mm -Weight: 248 kg

Condition: ready for operation (used), Two Temafa bale opener lines are offered for bale opening, pneumatic conveying of fiber bales and processing of natural and synthetic fibers. 1. Bale opener: 1) Bale opener BÖ-KSP 0347, working width: 1600mm. 2) Rod conveyor table FTRY 0502, length: 5700mm, width: 1600mm. 3) Material extraction hopper, working width: 1600mm, pipe flange: 350mm. 4) AEG extraction fan, type: AM 160 MR 4, power: 11kW, speed: 1450rpm. 2. Bale opener: 1) Bale opener BÖ-KSP with Cleanmaster, working width: 1300mm. 2) Rod conveyor table, length: 5000mm, width: 1260mm. 3) Material diverter for feeding into the CMA or for direct discharge. 4) Cleanmaster (CMA) with infeed, tumbler and time-controlled discharge flap. 5) TV 300 extraction fan and auxiliary extraction fan for cleaning the CMA and for wool room extraction. 6) Control cabinet, year of manufacture: 1999, control system: Siemens S5 with Lauer terminal. Documentation available. The machines are available from April 2027. The machines can be purchased separately. An on-site inspection is possible. Dwedpjznx Nksfx Apwja

Year of construction: 2021, condition: ready for operation (used), functionality: fully functional, overall weight: 2,500 kg, conveyor belt speed: 250 mm/s, conveyor belt width: 1,000 mm, temperature: 200 °C, machine/vehicle number: ST0403, production capacity: 240 unit/h, TECHNICAL DETAILS Number of conveyor belts: 1 Belt width: 1,000 mm Belt height: 830 mm Belt height adjustment: 50 mm Dedpfezmr Ecjx Apwowa Belt speed: 1–15 m/min Infeed length: 1,200 mm Length of heating zone: 3,000 mm Tunnel height: 100 mm Temperature: max. 200 °C Drying rate: 800–2,500 m³/min Outfeed length: 1,200 mm Output: max. 240 T-shirts/h MACHINE DETAILS Electrical voltage: 400 V AC Current: 16 A Mains frequency: 50/60 Hz Gas burner output: 1 × 55 kW Dimensions & Weight Dimensions (L x W x H): 5,400 x 1,300 x 1,700 mm Weight: 2,500 kg

Condition: ready for operation (used), Year of construction: 2021, functionality: fully functional, total length: 3,000 mm, total width: 1,200 mm, total height: 1,400 mm, overall weight: 250 kg, TECHNICAL DETAILS Number of nozzles: 13 Spray area: 1 × 3 m Dwodpfx Apezmr A Uewja Number of tank connections: 4 MACHINE DETAILS Voltage supply: 1 × 230 V + N + PE Fuse rating: 16 A Connected load: 0.9 kVA Dimensions & Weight Machine dimensions: 3,000 × 1,200 × 1,400 mm Machine weight: 250 kg

Condition: excellent (used), A robust German machine from PROTOS Schuhmaschinen – W. Ullrich K.G., Frankfurt am Main, designed for creating durable markings, numbering, and printing using hot stamping. This device is used in the production of footwear, leather goods, belts, wallets, cases, and other products requiring aesthetic marking. The machine is equipped with an adjustable marking mechanism with interchangeable digits and a system for feeding hot stamping foil. Its stable construction ensures precise and repeatable operation. Technical specifications: Manufacturer: PROTOS Schuhmaschinen W. Ullrich K.G., Frankfurt am Main Model: TF1501 Country of origin: Germany Adjustable marking unit Numbering/digits for marking Dodozgui Depfx Apwewa Foil feed for hot stamping Temperature control Foot control (pedal) Work table included Electrical power supply Applications: Natural and synthetic leather, Leather goods, Footwear, Textiles, Cardboard and paper, Plastics suitable for hot stamping. Condition: Used machine, in good visual condition. Condition matches the photos.

Condition: good (used), Year of construction: 2003, operating hours: 8,500 h, functionality: fully functional, Brückner RAM + SETEX Dsdpfjzphgnex Apwswa

Condition: new, Microprocessor board for ED 260 coin acceptor. Dwedpfxszaa Els Apwoa

Condition: used, including scanner, power supply, and B&R industrial PC; a Jensen Metric system was installed at the time of decommissioning. Dedpfszaziljx Apwewa

Condition: not inspected (used), Control unit for Böwe or Passat dryers. Djdpozaai Djfx Apwswa

Condition: ready for operation (used), Main drive unit of a Jensen Senking P72 SEW Eurodrive K127 UV2001.4 Dwodpfjy Ukq Ajx Apwea

Year of construction: 2015, condition: used, functionality: unexamined, machine/vehicle number: 116.067.00, 2 Walzen Ramisch Guarneri calender, type RGK 280.2000, configured as an inline calender with expansion stages for double-sided Simili mercerization of Jacquard cotton fabrics: 2-steel roller system with unwinding and rewinding units, Maier rotary head (cooled version), moisturizing system after unwinding, centrally controlled and braked unwinding, metal detector, seam monitor, stationary introduction system (3 rollers) motorized for tension regulation, 2 cooling rollers, rewinding combination (large bobbin winder with center winder), crane runway above the unit, 2x Yale overhead cranes (manually movable via chain). The condition can be seen from the attached appraisal report. Dwodpfx Apsyiurrewoa

Year of construction: 2000, condition: ready for operation (used), 3 Dilo needle looms are offered. 1) Pre-needling and finish-needling machine Dilo, DILOOM OD-II HVL 55, year of manufacture: 2000, number of needle boards: 2, working width: 5500mm, max. stroke frequency: 1000strokes/min, needle beam stroke: 60mm, needle board width: 200mm each, needle distribution range: approx. 3000-5000needles/m. 2) Double needle loom Dilo, DI-LOOM OUG-II S50, year of manufacture: 2000, working width: 5000mm, number of needle boards: 4, needle beam stroke: 60mm, max. stroke frequency: 1200strokes/min, needle density: approx. 18000needles/linear m. 3) Pre-needling and finish-needling machine Dilo, DI-LOOM OD II 55, year of manufacture: 1998, working width: 5500mm, needling system: Downstroke, number of needle boards: 2, needle beam stroke: 60mm, max. stroke frequency: 1200strokes/min, needle board width: 200mm each. Inspection possible by appointment. Dwsdozhntrepfx Apwja

Condition: used, Stock of fabric and leather processing machinery (upholstery). Everything you see in the photo = 1000 Euro, transport excluded. Djdpfx Aoy Ud Tkopwswa

Year of construction: 2018, condition: good (used), coolant capacity 10 m3l/h Headroom 20 m operating pressure 2 bar voltage 230/400 V - 50 Hz motor speed 2900 U/min Dodoub Utqjpfx Apwowa motor type 90 L engine output 2,2 kW weight 35 kg

Year of construction: 2015, condition: excellent (used), coolant capacity 10 m3l/h Headroom 18 m operating pressure 2 bar voltage 230/400 V - 50 Hz motor type 80 L motor speed 2900 U/min engine output 1,1 kW weight 33 kg normal priming centrifugal pump, Housing and impeller made of stainless steel, Flange connections, Dodpfx Aeub Ur Tepwswa Ref. no. 22/98-118884

Year of construction: 1983, condition: used, Working width 3400 mm Roller width 3600 mm Number of rollers 2 Stück Supporting roller - dia 340 mm Roller covering - soft rubber 75 Grad shore Swimming roll - dia 270 mm Roller covering - ebonit 100 Grad shore Pressure line 50 N / mm Pressure total 18 to Cloth guiding system for woven fabrics Breithalter, Leitwalze Drive shaft dia 80 mm Hydraulic unit for separately pressure in inox Drive side links Operting side angeben • 2-Bowls-Finishing padder with 1 new swimming-roll (s-roll) and supporting roll; • new hydraulic control and pressure application for s-roll Dwsdpetv Iggefx Apwea • drive motor and new electric control • machine will be completely refurbished before delivery • we grant a warranty for a period of 12 months

Year of construction: 2018, condition: good (used), coolant capacity 10 m3l/h Headroom 20 m operating pressure 2 bar voltage 230/400 V - 50 Hz motor speed 2900 U/min Dwsdpfx Asub Utdspwea motor type 90 L engine output 2,2 kW weight 35 kg Standard suction centrifugal pump, Stainless steel housing and impeller, Flange connections, Serial No.: 22/04-140200

Year of construction: 1981, condition: ready for operation (used), diameter 800 mm roll surface width 1800 mm heating system Sattdampf 0 0 860 Liter 0 5 bar max. temperature 168 ° C range L-W-H 2,2 x 0,8 x 0,8 m 4 pieces in total, drying drums Ø 800 mm, Dsdpfx Apjw Tm Tiswjwa steam-heated, including pedestal bearings, foto no. 4 shows how the drying cylinder works.

Condition: excellent (used), functionality: fully functional, Camoga C520L CE Surface splitter, walling machine – machine for splitting leather - Working width: 520mm - Automatic knife positioning - Smooth adjustment of material feed - Material feed onto two rollers or onto a fixed bar at the top (optional, extra charge) - Machine equipped with a display showing the thickness of the split material - Automatic material retraction and adjustment of retraction length - Dust collector, powerful suction system and waste bin Complete manufacturer's documentation included with the machine Machine in perfect technical condition after a full service Price negotiable Delivery to the customer possible via Raben courier service More information available upon request Dwodjzh Rcpepfx Apwea

Condition: good (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 1522, We are offering this well-maintained H&H AI 008 hot air taping machine, manufactured in 2015. Manufacturer: H&H Model: AI 008 Year of manufacture: 2015 Condition: good Category ID: 677 Type ID: 2467 Machine type: Hot air taping machine If you have any questions or require further information, please do not hesitate to send us a message or call us. The machine is located at our production facility in Mönchengladbach and can be inspected and tested there during normal business hours. It was in use in our production facility until recently. It is perfectly suited for waterproof seam sealing. Dwodszdy Rbspfx Apwoa

Condition: new, Year of construction: 2026, operating hours: 10 h, machine/vehicle number: Parmel_06202P&C, type of input current: three-phase, total width: 2,200 mm, input voltage: 400 V, working width: 1,600 mm, YORK Single-Sheet Feeder Djdpfx Apsyh R Htjwewa The YORK single-sheet feeder features a top-twist material feeding system that allows the material to be fed directly into the automatic cutter, ensuring a continuous and efficient production flow. Precision and Technology The YORK single-sheet feeder is equipped with a full-color, multilingual touchscreen control panel and dedicated control software for accurate and intuitive operation. The system can be electronically synchronized with virtually any automatic cutting machine, providing precise feeding control, reliable performance, and seamless integration into automated production lines.