Used Pipe-bending machines for sale (155)

Condition: ready for operation (used), Drukbuigmachine voor het buigen van buizen met en zonder doorn Buigen onder druk maakt het mogelijk om zeer kleine buigradiussen te produceren (minimale radius 1 x D). Hierdoor kunnen bijvoorbeeld ketelinstallaties met een hoger vermogen in kleinere afmetingen worden geproduceerd. Drukbuigen maakt ook het gebruik van zeer lange buizen mogelijk, omdat er geen doorn nodig is. De buislengtes kunnen achter de machine aan elkaar worden gelast en tot afgewerkte systemen worden gebogen, waardoor er geen paswerk nodig is. Bovendien garandeert drukbuigen de naleving van de voorgeschreven wanddiktetoleranties in de buisbochten volgens VGB. Vergeleken met conventioneel buigen met een doorn is de afname van de wanddikte aan de buitenzijde van de buis bij drukbuigen zonder doorn zeer gering. Bij gebruik van een buigdoorn maakt drukbuigen het mogelijk om bochten te maken uit dunwandige holle legeringsbuizen met zeer kleine buigradiussen (1 x D), omdat door drukbuigen de buitenwand van de bocht wordt ontlast Er zijn veel hulpmiddelen inbegrepen Drukbuigen of drukbuigen doornvrij koudbuigen Max dia tube x thickness: Ø 89 x 5 mm Max bendingradius: 180° Back stop max tubelength: 6000 mm Dob Haov Sfivomr Ujut Bending die: yes

Condition: good (used), Year of construction: 2006, 1 CNC tube end forming machine Manufacturer: BLM Type: Tube Form M32x1.5 Year of manufacture: 2006 Dob Haon Sm Ddemr Usut Technical specifications Thrust force: 3.5 tons Locking force: 5 tons Working stroke: 130 mm Tool diameter: 80 mm Dimensions: 2400 x 1400 x 2000 mm Connected load: 12 kVA Weight: 2200 kg

Condition: new, This practical helper for any workshop simplifies assembly and welding of tubes at a 90° angle. It also allows machining of different tube diameters with one device. An eccentric shaft ensures that only minimal effort is needed. Djb Hamrowhkf Hj Uout

Condition: used, Manual pipe bender, pipe bending device, mandrel bending machine Hand-held pipe bender, hand-held wire bending machine, bending machine Manufacturer: MEWAG Bending capacity: max. Ø 16 mm 1 bending tool Ø 15 mm with 25 mm bending radius Duob Haewhf Hfemr Ust 1 bending tool Ø 10 mm with 16 mm bending radius 1 bending tool Ø 8 mm with 9 mm bending radius 1 bending tool Ø 6 mm with 8 mm bending radius 1 bending tool Ø 5 mm with 8 mm bending radius - Rotating plate with degree markings - Scope of delivery as shown - Wooden box for storage Dimensions L x W x H: 570 x 480 x 145 mm Weight: 43 kg Good condition

Condition: refurbished (used), Year of construction: 2017, 2017 (Refurbished 2021) Unison Breeze 100 Single / Multistacking CNC Tube Bender Dobowhv H Ae Hamr Ueut Bending Capacity Ø100 x 2.00mm. Bend Torque 30,000Nm. Servo Controlled Follower 180˚ at 30 CLR. Collet Capacity Ø100mm. Axis Maximum Speed / Feed 500mm/sec. Bend 70˚/sec. Rotation 360˚/sec. Maximum Stacks At Maximum OD = 3. Maximum Bend Radius =40mm. Maximum Bend Angle 200˚. Load Height 1,200mm. Maximum Tube Length 3,100mm. Maximum Tube Length Hitch = 5,700mm. Multi-radius Is Standard. Repeatability And Accuracy = Feed 0.05 / 0.10mm, Bend 0.05 / 0.10mm, Rotation 0.05 / 0.10˚. 480V 3PH. Full Load Current 94A. Approximate Machine Dimensions (W)8,000 x (D)2,000 x (H)2,300mm. S/No. 2792 (2017) 2792B (2021). NOTE: A loading charge of £250 + VAT will be added to the buyers invoice.

Condition: new, Hydraulic pipe S235JR: 54 x 4 mm Aluminum tube: 54 x 5 mm Steel pipe: 54 x 2 mm Stainless steel pipe AISI 304/316: 42 x 3 mm Copper or brass tube: 54 x 4 mm Gas pipe for pipelines: 1 1/2" Max bending angle: 180° Max bending radius: 150 mm Dusbecvvc Hj Hamr Ust Engine power: 1.1 kW Voltage: 400 V Machine dimensions (W x D x H)*: 700 x 230 x 520 mm Weight approx.: 107 kg *without base. Base not included in delivery. It is of course available at an extra cost.

Condition: used, Rohrendumformer make Langbow length 1800 x width 800 x height 1500 mm stroke 300 mm clamping way 55 mm 5,5 kw 380 Volt Duob Hamrjc R N D Us Uot FZLPEZ3MJMZ

Year of construction: 1998, Condition: reconditioned (used), Machine is in very good condition. Capacity, Ø mm / 90 x 5 radius, min./max. / 50/400 Bending Rate/Repeatability / 40º/s. ±0.1° Dsb Hash I Dtwemr Uout Mandrel length 4 000 Weight, kg 10 000 Machine dimensions 6.7 x 1.7 x 1.8 Engine kW / 40 Length feed 900 mm/sec Tolerance degree 0.05-0.1°/mm Tools: 48.3-50-57-88.9mm

Condition: ready for operation (used), Pipe Bender, Tube Bending Machine, Profile Bending Machine, SHS/RHS Bender, Used Machine Manufacturer: Schwarze-Wirtz Model: Perfect H135 Dimensions: 6115 x 2870 x 1300 mm Bending Capacity: Round tube: Ø 130 mm, bending radius: 500 mm Square tube: 30 mm, radius: 380 mm 45 mm, radius: 500 mm 50 mm, radius: 500 mm Dob Hswhmv Ujamr Ueut 70 mm, radius: 500 mm 90 mm, radius: 500 mm Bending Angle: up to 180° Electrical Specifications: 380 V

Condition: new, Year of construction: 2025, Functionality: fully functional, Manual Pipe Bender HRB-3D 850 Dusb Hottagdeamr Uet for bending pipes and solid material up to a maximum of 12 mm Precise positioning and repeatable bending are ensured by three battery-operated digital displays that precisely show the bending angle, pipe feed, and pipe twist. - 80 mm three-jaw chuck - Feed stop system - Feed length approx. 850 mm The manual pipe bender should be permanently mounted on a table or frame (not included). We would be happy to provide you with a detailed quote if you send us your complete company address, email address, and contact details.

Condition: good (used), Year of construction: 2001, bending radius: 200 mm, pipe diameter: 76 mm, space requirement width: 850 mm, space requirement length: 5,700 mm, space requirement height: 1,150 mm, Pipe insertion length max 4500 mm - electronic 1-axis control - 2-axis measuring system - electronic display of the twist - electronic display of the longitudinal position - twist angle unit with stops Dujb Hamswhdryor Uot - early mandrel retraction - automatic mandrel lubrication with micro-oil dosing Accessories: - incl. bending tool 21.3 / 26.9 / 33.7 / 42.4 / 48.3 / 60.3 / 76.1 mm x 2 D - incl. various mandrels

Condition: good (used), Used hydraulic bending machine for pipes, profiles Ercolina CE40H2 Hydraulic movement of the upper roller Driven 2 lower rollers Shaft diameter: 40 mm Machine weight: 300kg Year of manufacture: 2007 Duob Hamovtfkpor Uet The machine has original adjustable rolls for flat and square workpieces. In addition, two sets of original rolls for: 1", 3/4", 1/2" and 1"1/4" pipes are included.

Condition: new, Year of construction: 2025, Electric pipe bending machine without mandrel. Accurate and efficient machine for bending steel, copper, aluminum and brass pipes. The possibility of selecting the optimal bending radius allows for obtaining high-quality results without deforming the material. The presented bending machine is very easy to use. Pipe benders are devices used in individual and small-series production of parts in the automotive, furniture, architecture or garden tool industries. The main bending die is driven by a reduction gear, an electric motor. The device can work in two modes: manual and semi-automatic. The simple and durable design ensures long-term, trouble-free use. Standard equipment digital reading of the bending angle The BENDMASTER 40A machine is equipped with dies for pipes with a diameter of: 17.2; 21.3; 26.9; 33.7; 38.1 mm Technical data MAXIMUM BENDING ANGLE 180° DIY ROTATIONAL SPEED WHEN BENDING 5 rpm MAIN MOTOR POWER 1.5 kW EXTERNAL DIMENSIONS OF THE DEVICE Dsb Hamjvugx Dsr Ujut 720 x 500 x 1030 mm WEIGHT 330 kg For more information, please contact us by phone or email. We invite you to familiarize yourself with the offer on our website.

Condition: ready for operation (used), Year of construction: 1996, Functionality: fully functional, bending angle: 182 °, bending radius: 400 mm, total length: 7,000 mm, total height: 1,800 mm, total width: 2,200 mm, thorn length: 4,000 mm, overall weight: 16,000 kg, pipe diameter: 127 mm, type of input current: three-phase, wall thickness: 5 mm, feed length Z-axis: 4,000 mm, motor voltage: 400 V, Equipment: documentation/manual, Capacity, Ø mm / 127 x 5 Dujbsu Rf E Es Hamr Uot Radius, min./max. / 50/400 Bending speed/repeatability / 40º/s. ±0,1° Mandrel length 4 000 Weight, kg 16 000 Motor kW / 40 Length feed 900 mm/sec Degree of tolerance 0.05-0.1°/mm Tools: 63 mm

Condition: ready for operation (used), Year of construction: 2017, Performance range: 20mm-60mm, max. bending angle: 180°+10°, max. bending radius: 150mm, effective length: 3048mm, bending height: 1050mm, max. section modulus: 12.1cm³, bending tolerance: +/-0.1°, operating pressure: 200bar, connected load: 4kW, machine dimensions X/Y/Z: approx. 2000mm/900mm/1200mm, weight: approx. 500kg. Documentation available. On-site inspection is possible. Dsb Hamowg E Dher Ujut

Condition: like new (used), Year of construction: 2023, Mandrel Bending Machine S4501 ---- For the production of pipe geometries with bending radii from 1.5xD → Maximum bending capacity: pipe 42.4 x 3.25 mm (steel max. Re 240 N/mm²) → Maximum bending capacity: pipe 30 x 30 x 3 mm → Maximum bending capacity: pipe 42.4 x 2 mm (stainless steel max. Rp0.2 260 N/mm²) → Total connected load 3 kW → Pipe insertion length approx. 1.5 m Robust and durable steel construction. Maintenance-free servo drive for the bending, feed, and twisting axes. The control system's touchscreen display enables simple and intuitive programming and operation of the system. After the pipe is inserted, it is secured in the carriage by the chuck. This enables precise positioning of the pipe and thus the creation of dimensionally accurate geometries. The standard also includes a check of the pipe geometry before the bending process: If the bending process is started in the wrong position, the machine will not issue a release. This eliminates the risk of incorrect operation. Optional additional features provide greater convenience and increase output, thus increasing the efficiency of the system. Data exchange from the optional TBS-3D pipe calculation program (PC version) takes place via USB stick or network. Existing pipe geometries can be imported using the software. Standard equipment: → 1.5 kW servo drive for the bending axis → Adjustable speed → Left-hand bending direction → Bending angle resolution 0.1° → Max. bending radius 120 mm → Bending shaft diameter 50 mm → Feed servo drive → Rotation servo drive → Three-jaw chuck for locking the tube in the carriage → Pneumatic tool retraction Hydraulics: → Hydraulic tube clamping with adjustable clamping pressure → Programmable early mandrel retraction PLC control: → 10" color touchscreen → ETH 10/100, X2X Link, 2xUSB → Foot switch operation → Data transfer via LAN or USB network → Material database Unique graphical programming: Simple geometries can be calculated directly on the machine. The control system calculates the feed values and bending angles directly after entering the length and angle. Dusb Hetr U Hleamr Ust Power consumption: 400V 16A Dimensions: L: 2.3 m x W: 1m x H: 1.4m Weight: approx. 1200 kg

Condition: good (used), Year of construction: 1994, bending angle: 190 °, bending radius: 700 mm, overall weight: 3,300 kg, wall thickness: 11 mm, - CNC control: CNC MMI Multicontrol 2000 - Control system: NCU - PLC: Siemens Simatic S7 - Electrical connection: 400V / 50 Hz / 85 A The machine is fully automatic and equipped with a tool changer. The following tools are available: Pipe Ø 48.3 mm; radius 105 mm Pipe Ø 60.3 mm; radius 120 mm Pipe Ø 63.5 mm; radius 150 mm Pipe Ø 76.1 mm; radius 190 mm Pipe Ø 88.9 mm; radius 222 mm Pipe Ø 114.3 mm; radius 285 mm Pipe Ø 139.7 mm; radius 350 mm Pipe Ø 141.3 mm; Radius 700 mm Pipe diameter 168.3 mm; radius 420 mm Djb Hjwhdrmsamr Usut There were a few mandrels with a marking directly engraved on them. These had the following specifications: 88.9 x 8 mm; 88.9 x 4.5 mm; 114.3 x 8.8 mm; 139.7 x 8.8 mm; 168.3 x 12.5 mm; 168.3 x 8.8 mm The following outer diameters of the mandrels were measured: 23.2 mm; 32.3 mm; 37.1 mm; 41.5 mm; 59.3 mm; 70.3 mm; 77.7 mm; 80.9 mm; 88.7 mm; 93.2 mm; 94.7 mm; 103.0 mm; 112.8 mm; 118.8 mm; 128.9 mm; 138.5 mm; 147.2 mm; 153.6 mm The accessory package is valued at approximately €150,000

Condition: used, Year of construction: 2006, bending angle: 150 °, total length: 3,000 mm, pipe diameter: 35 mm, wall thickness: 3 mm, input voltage: 380 V, 2006 wafios BER35 Dusbevftpdo Hamr Ust

Condition: new, Year of construction: 2025, Accurate and efficient industrial bending machine for bending steel, copper, aluminum and brass pipes. The ability to select the optimal bending radius allows for high-quality results without material deformation. The presented bending machine is very easy to use. Pipe benders are devices used for individual and small-scale production of parts in the automotive or furniture industry. The main bending die is driven by a reduction gear, an electric motor. The device can work in two modes: manual and semi-automatic. The simple and durable design ensures long-term, trouble-free use and guarantees ease of use. With manual pressure as standard. Hydraulic pressure available as an option. Machine description The bending machine is equipped with two motors: 2.2 kW for rotation of the gear with the die 1.1 kW for operating the hydraulic pressure pump The hydraulic pump is responsible for the pressure of the hoof. In automatic mode, the machine independently presses the hoof to the appropriate distance depending on the pipe diameter. The adjustable limit switch allows you to set the appropriate pressure. The bending machine has 2 operating modes: automatic and manual; AUTOMATIC MODE The operator sets the required bending angle of the element on the control panel and then presses the button on the foot controller. The machine then bends the pipe. MANUAL MODE In manual mode, the operator manually sets the bending angle of the pipe (via the control panel). The panel is equipped with a display that indicates the set bending angle and the current bending angle of the pipe. Standard equipment digital reading of the bending angle The BENDMASTER 50 machine is equipped with dies for pipes with a diameter of: 26.9; 32; 38.1; 48.4 mm Technical data MAXIMUM BENDING ANGLE 180° DIY ROTATIONAL SPEED DURING BENDING Dusbsvugw Ho Hamr Uet 5 rpm MAIN MOTOR POWER 2.2 kW HYDRAULIC PUMP MOTOR POWER 1.1 kW EXTERNAL DIMENSIONS OF THE DEVICE 1145 x 580 x 980 mm WEIGHT 620 kg For more information, please contact us by phone or email. We invite you to familiarize yourself with the offer on our website.

Condition: used, Year of construction: 1986, tube diameter 4-20 mm wall strength 2 mm bending radius min. 10 mm bending radius max. 75 mm bending speed 35 mm/min pull up length of tube 2000 mm total power requirement 7,5 kW weight of the machine ca. 1,1 t dimensions ca. 3100x1000x1400 mm Dujb Hamswbi Hcer Uet

Condition: new, Year of construction: 2025, Mandrel-free pipe bending machine RB 54 - NC-controlled, with large program memory Article number: 4300054 NC control for setting the bending angle Up to 50 programs can be saved High-quality, robust design Fast tool change Purely motor drive Automatically returns to the starting position TECHNICAL DATA General information Bending radius max. 162mm Bending angle max. 210° Bending speed(s) 2rpm Torque 2341Nm Dimensions and weights Length (product) approx. 600mm Width/depth (product) approx. 220mm Height (product) approx. 470mm Weight (net) approx. 107kg Bending performance Bending performance of pipe material 420 N/mm² (Ø x wall thickness) 54 x 4mm Bending performance of pipe material 350 N/mm² (Ø x wall thickness) 54 x 4mm Bending performance of pipe material 650 N/mm² (Ø x wall thickness) 42 x 3mm Dob Hamrevk Scge Ueut Electrical data Drive motor power 1.1kW Connection voltage 400V Mains frequency 50Hz Location: from stock - available immediately -

Condition: good (used), Year of construction: 1984, well-preserved machine with tools Dueb Hamowf Updjr Ust

Condition: used, Year of construction: 2006, Hydraulic driven Roller diameter Ø 165 mm Shaft Ø 40 mm Capacity tube (thin-walled) Ø 70x1.5mm min Ø 700 mm Debetqcrho Hamr Usut Capacity tube (thick-walled) Ø 2" x 3.2 Ø 450 mm Capacity angle bar 50x50x6 mm min. Ø 400 mm Capacity strip 50x10 mm min. Ø 250 mm Capacity strip (difficult side) 100x15 mm min. Ø 250 mm Capacity quiver 50x50x3 mm min. Ø 500 mm Capacity shaft Ø 35 mm min. Ø 250 mm Power 1.85 kW Bending speed 10 rpm

Condition: excellent (used), Bending capacity: Ø60 x 2 mm Bending angle: 0 - 180° Revolver-adjustment: 12-positions Mandrellength: 4500 mm Sets of bendingdies: - Ø 22 mm - Ø 25 mm - Ø 48 mm Featured with: Dob Hamsn Smq Ijr Usut - 3 Mandrels - Mandrel retraction unit - Footpedal - Bendingspeed controller Country of origin: The Netherlands Motor power: 7,5 kW Machine LxWxH: 5350 x 1100 x 1100 mm Machine weight: 2300 kg

Condition: good (used), Year of construction: 1981, machine/vehicle number: 930-311-2, Offer 23247 Technical specifications: - Bending capacity - Pipe at 45 kg / mm² Ø 6 - 48 mm Duob Howfqm Eoamr Uet - Max. bending angle 180° - Max. bending radius 145 mm - Drive 400 V / 1.7 kW - Space required approx. W 900 x H 1100 x D 1400 mm - Weight approx. 600 kg - With - Circular pipe saw - Internal and external pipe deburring device - Mandrel bending device approx. 2000 mm - Various bending tools as shown