Year of construction: 2019, Condition: like new (used), overall weight: 947 kg, working width: 320 mm, input voltage: 400 V, roll diameter: 330 mm, machine/vehicle number: A7X5023000109, - Printing width: 320 mm - Roll width: 330 mm - Resolution: 1200x1200 dpi x 8bit 1200x3600 dpi On 07.09.2022 - after disassembly and transport to the warehouse, it was checked by the service department, which found no deficiencies, or damage. The whole set consists of an unwinder, printer and rewinder, which allows you to print most self-adhesive media. Delqyjp S N Snj Nxyecg - Media feeding speed: 19m/min, 13.5m/min, 9.45m/min. - Speed depends on the type of paper - Dimensions: 3869x1480x1138 mm - Weight: 947 kg - Power supply: 400 V/50 Hz

Condition: used, Year of construction: 2008, Perfect binding line 2008 fully automatic Gathering system Streamer with 20 stations Perfect binder Master e PUR / hot melt / cold melt front cutting station VSS remote diagnosis with cooling and drying section with three-cutter trim-tec 75i in production located: Germany available: immediately Dcslqy Nev Uqarsxyjg

Condition: as good as new (ex-display), Bacciottini Group OXO MULTI SKILL, machine from showroom. OXO MULTISKILL is a compact creasing and folding machine with automatic non-stop loading feeder With few simple operations OXO MULTISKILL can switch from a normal creasing machine to a creasing/folding unit. Once in the folding machine mode after the fold type, sheet length and paper thickness have been selected, the machine adjusts automatically ready for production. Additional supplementary creases can be added along with ones necessary for the folding of a product. It allows a quick tool change over from the creasing to perforating just in a few seconds. Dcjlqov Rbkmjy Nxyjg TECHNICAL FEATURES: Minimum size in creasing: 8×10 cm | folding: 8×15 cm Maximum size in creasing and/or in folding 50×70 cm (with optional extension feeder 50×100 cm) – minimum and maximum size can change depending on the kind of fold Sheet weight in creasing: from 80 to 600 g.s.m. in folding: from 80 to 400 g.s.m.; from 0.08 mm to 0.4 mm of thickness – variable according to the quality of the paper Min. distance creasing 0.1 mm between creases | 0.1 mm from front edge | 0.1 mm from tail edge Production A4 in creasing: 9,000 sheets per hour (with 1 crease.) | in folding: 9,000 sheets per hour (with a single fold) Maximum number of creases 40 – possibility of doing a greater number of creases than those necessary to fold the sheet Power supply 400 Volt three phase + Neutral 50 Hz 4 Kw This machine from showroom is equipped by a standard V-shape creasing kit. All other optional tools are available and can be added to its equipment: -digital creation kit -standard perforating kit 2/1, 3/1, or 4/1 -micro perforating kit -extension feeder 100 cm

Condition: used, Year of construction: 2010, Only for export! Agfa VCF85 violet clean out unit, online version Dcolqyetq R Tie Nxysg

Condition: excellent (used), Supresetter A52/A75 CIP Platesetter Platesetter Year 2018 Dcslqy Nowdrgqsxyeg

Year of construction: 2016, Condition: good (used), Codimag VIVA 340 Aniflo  Age: 2016  Format: 340mm  Paper unwinding Delqy Njtnhyqoxyscg  Corona unit  Web cleaning  6 x Offset  Hot foil unit.  2 x Flexounit  Web edge control  CHILLER  Register Control  Paper rewind

Condition: ready for operation (used), D&K System Jr. Year 2006 Format max 68x76 cm Format min 20x28cm Dolqy Njwhcfxsxyocg Till 500 gsm can work Single Sided Thermal Film Laminator Accufeed Jr. Automatic Sheet Feeder, Acculam Jr. Laminator, Accu-III Jr. Automatic Sheet Separator, Jogger Catch Tray Delivery

Condition: excellent (used), Functionality: fully functional, Equipment: documentation/manual, Original Japanese line for the production of cardboard books. Offline set consists of a machine for gluing cardboard books - 8 stations. Glue application from rollers. Separate press, machine for wrapping the cover. It is possible to buy a Wholenberg three-knife set with a set for rounding corners Djlqy Nxswf Rnveyscg I will sell to the company that offers the highest price.

Condition: used, Year of construction: 2018, EOS M100 DMLS Additive Manufacturing Machine (2018) Laser thickness : 15 30 ?m Production speed : 1 9 cm3/h (depending on material) Laser system : Fibre laser 200 W (cw) Max scan speed : 7 m/s Focus diameter : approx 75 ?m Connected loads : power consumption max. 1.5 kW Power supply 1/N/PE AC 230 V, 16 A Inert gas supply : 1 gas connection provided / Nitrogen or Argon Inert gas consumption : approx. 0.6 0.8 l/min Djlqy Nxowa S Igoyocg Machine dimensions : 820 x 1839 x 1410 mm (W x H x D) Handling station dimensions : 729 x 1392 x 628 mm (W x H x D) Machine weight : 700 kg approx. Handling station weight : 100 kg Operating conditions : 15 30C Materials available : Stainless Steel 316L , Stainless Steel 17-4PH, Maraging Steel M300, Aluminum AlSi10Mg, Nickel 718, Titanium Ti6Al4V ELI Grade 23, Titanium CPTi Grade 2, Bronze CuSn, remanium star CL (CoCrW), rematitan CL (Ti6Al4V ELI)

Condition: used, Only for export! Dcjlqy Nxsvi Nhweysg G&J ML860 Film Processor, online version

Condition: excellent (used), 1 piece Model: VCVRA-1804 Dslqy Nevu Spnjxyscg Power: 6300 W Type of device: 3D printer

Year of construction: 1999, Condition: good (used), GALLUS ARSOMA EM 410  Age 1999  Web width 410mm Equipment:  6 Flexo printing units  Turnbar Dcjlotnhmmjqy Nxyog  Lamination  3 x Die-Cutting  3 x Unwind / Rewind  GAPMASTER  Corona treatment  Chilled rollers on 6 printing units  Chiller  UV-Flexo  BST Camera Inspection  Web Guide  Web cleaning  Slitter - Knives for longside cutting on web! Accessories:  27 x Magneticcylinder  74 x Printingcylinder for 1.14 clichés  28 x Aniloxrollers  1 x new Drive motor  Various spare parts, adapters and blades Please contact me if you have any questions. Technical- and optical condition: Technical: 9/10 (checked and in excellent running condition) Optical: 9/10 (cleaned and can go to end-user directly)

Condition: reconditioned (used), Year of construction: 2013, Functionality: fully functional, machine/vehicle number: 2676, warranty duration: 6 months, year of last overhaul: 2024, This machine costs you less than 0.1ct per insertion With our latest project, we offer you a completely overhauled inserting machine for less than 30,000 euros, with which you can process up to 10,000 letters per hour. Assuming a capacity utilisation of 4 hours/day, this machine will cost you less than 0.1 ct per envelope or 0.65 Euro per 1,000 envelopes (at 230 working days/year) after 5 years of operation. Thanks to its compact design, this machine can also be easily operated by one operator. If you now also take into account the high availability of this machine due to our extensive major overhaul into an almost new condition, you will hardly find a more economical alternative on the market at present. Technically up to date For us, however, favourable does not mean cheap. We have equipped our Challenge DL with a future-proof machine control system. This ensures high availability for many years of production, not only mechanically but also electronically. Our machine control is already prepared for selective insert control, "read-and-print", insert alignment and for the control of an optional feed channel. This is what we promise Our guarantee promise of a full 12 months also applies to this Grützmacher Challenge DL. So you are on the safe side. Because if something should break during this time, we will replace the defective component and install it at our expense (excluding wear and tear and travel). Format: DIN C6 to DIN lang Year: 2001 Machine-No.: KC4-022 Condition: Refurbished Equipment (extract): • 7-Base • rotary feeder (tech. revised) • 3 x friction feeders • 1 x shuttle feeder • 1 x discharge conveyor Special Features: • Max. output = 10 000 /h • New machine control for: - Selective Control Dolst A A Tpsqy Nxyjcg - Address matching possible on friction and rotary feeders - "read and print" - Control of an optional feed channel • Extensively overhauled and full warranty for 12 months

Condition: excellent (used), Functionality: fully functional, machine/vehicle number: 3010-015, Equipment: documentation/manual, Trivet in excellent condition. Possible purchase of a device for rounding corners Expected price 15 K euros, but I will consider any reasonable offer Dolqy Nxowf Rbieyscg

Condition: used, Year of construction: 2014, EOS M290 DMLS Additive Manufacturing Machine (2014) Build Volume : 250 x 250 x 325 mm (9.8 x 9.8 x 12.8 in) Dslqyjwa S D Is Nxyocg Laser Type : Yb-fiber laser; 1 x 400 W Presicion Optics : 1 F-theta-lens(es); 1 High-speed scanner(s) Scan Speed : up to 7.0 m/s (23.0 ft/s) Focus Diameter approx. 100 m (0.00394 in) Power Supply : 1 x 32 A Power Consumption : max. 8.5 kW / typical 2.4 kW Compressed Air Supply : 7 Bar; 20 m/h (102 psi; 706 ft/h) Machine Dimensions : 2500 x 1300 x 2190 mm (98.4 x 51.2 x 86.2 in) Recommended Installation Space : min. 4800 x 3600 x 2900 mm (189.0 x 141.7 x 114.2 in) Weight approx. 1250 kg (2756 lbs)

Condition: used, Year of construction: 1995, WOHLENBERG Perfect Binding Line MASTER 6501 year 1995 Overview: Delqotpyxmey Nxyecg SPRINTER 7010 gathering machine MASTER 6501 perfect binder transport and drying line Configuration: SPRINTER 7010 gathering machine - handfeeding station - 24 stations (12 stations, year 1999) and with 4 x WST opticontrol units for 4 stations - set-up element - transfer to the binder (prepared for connection to a central air system) MASTER 6501 perfect binder - 18 clamps - infeed - milling and roughening station - dust exhauster - Hotmelt spine gluing unit with integrated premelter - Hotmelt side gluing unit with integrated premelter - gauzing station - rotary cover feeder with Nordson nozzle gluing - 2 pressing stations Technical specifications: mechanical speed: up to 6.500 cycles/h size range max.: 430 x 320 x 62 mm size range min.: 140 x 105 x 2 mm transport and drying line - electrical cabinet - lay down device - with emergency delivery via reversing belt - approx. 30 meters length

Condition: good (used), machine/vehicle number: 52513/5, Hunkeler RE-MAT register punch, machine number 52343/30, in good condition, available immediately. Djlqy Njrc Attsxyjcg We have two other machines in stock. If you are interested, we would be happy to inform you about other machines we have in stock. You are welcome to view the machine in our facility by appointment.

Condition: ready for operation (used), Year of construction: 2016, Additional Equipment Djlqewacc Uey Nxyocg Adsorption dryer DC1.5E Build Processor single-user license Cooling unit DI l/W 4.6kW 50/60Hz Screening machine PSM100 V3 Hose clamp / Hose 28/19 Coolflux 42 in 25kg container Operating manual This SLM 280 HL was manufactured in 2016. Ideal for those looking to get high-quality 3D metal printing capabilities, this machine represents a significant opportunity. Contact us for more information. Application Types 3D Printing

Year of construction: 2001, Condition: like new (used), ROTOFLEX VLI 330 INSPECTION - SLITTER - REWINDER Machine information: Rotoflex products are proven in practical applications with self-adhesive labels, processing, blister foils, and all kinds of paper. This professional and heavy duty die-cutter with slitter/rewinder and label checking will rewind rolls in a perfect Dceloqlbrusqy Nxyog register with a max. diameter of 700 mms and a max. width of 330 mms into smaller sized rolls. smaller sized rolls. During the process the labels can be checked for quality and missing labels. Specifications:  Max. web width: 330 mms  Roll diameter: unwind: 700 mms / rewind: 400 mms  Shaft diameter: unwind: 76 mms / rewind: 76 mms  Max. speed: 230 m/min.  Slitter  Rewinder  Splice table Description: unwind with splice tables and clamps, web guide and tension control (including automatic web holder at stopping procedure), pressure controlled die-cutting station with 1 magnetic cylinder, pneumatically operated knife-unit with up to 12 knives for cutting and/or slitting, digital operating panel with programs, settings, counters (labels or meters) and checking control (missing label control). Foot-pedal operation and all safeties on the machine. Year / SN: 2001 / VLI11901000217 Technical- and optical condition: Technical: 8/10 (checked and in excellent running condition) Optical: 9/10 (cleaned and can go to end-user directly)

Year of construction: 2005, Condition: used, Ferag Multi Disc refurbished Delsdrcbmsqy Nxyscg Maschine for unwinding inserts for later automatically insert in other printed main products

Condition: used, Year of construction: 2020, EOS M300-4 DMLS Additive Manufacturing Machine (2020) Build volume : 300 x 300 x 435* mm (11.8 x 11.8 x 17.1 in) Laser type : Yb-fiber laser; 4 x 400 W Precision optics : 4 F-theta-lens(es); 4 High-speed scanner(s) Scan speed: up to 7.0 m/s (23.0 ft/s) Focus diameter: approx. 100 m (0.00394 in) Power supply : 3 x 63 A Power consumption : max. 19.6 kW / typical 16.0 kW Compressed air supply: 7 Bar; 15 m/h (102 psi; 530 ft/h) Flexible dispenser Serial number : P.13.1B.0033 Year : 2019 Dcelqowa Swzoy Nxyeg Transfer station Serial number : P.11.1B0026 Year : 2019 Hydac cooling system Type : RFCS-G3-04500-W-L-R25-7-IW-UL Serial number : 4052929 EOS Sieving unit Model : CM M Pro Crown pedestrian truck Model : EOS Sirius Serial number : EOS 1603 Year : 2020 Capacity 600kgs

Condition: good (used), Year of construction: 2011, Unit for unwinding and feeding pre-products Year 2011 Delqy Nev Sddfsxyjcg

Condition: excellent (used), Year of construction: 2010, Unit for stacking printed products Year 2010 – Beckhoff control Dolqy Nev Sdc Ijxyscg

Condition: used, Year of construction: 2000, Gämmerler KL 501/1 – Unit for stacking printed products Dslqyev Sdf Ao Nxyecg

Condition: good (used), Year of construction: 2009, The FERAG MultiStack is a compensating stacker which is used at the end of an inserting line for depositing printed products. Dcjlqy Nstk S Ecjxysg