Used Roller levellers for sale (47)

Condition: used, Year of construction: 1984, material width 250 mm material thickness 0,2 - 2,0 mm no. of straightening rolls 7 straightening roll diameter 60 mm Knsdovuk Sbspfx Afkoc run-in height 1250 mm speed 5 - 30 m/min power requirement 2,2 + 1,3 kW Weight 0,65 t dimensions (WxDxH) 1,05 x 1,25 x 1,5 m with infinitely variable drive, material inlet inclineable, straightening rolls individually manually adjustable, pneumatic opening of the upper roller cassette, coil loop control via arm as is where is, WITHOUT putting into operation Price for commissioning (in given condition) on request

Condition: used, Technical details: sheet width: 250 mm plate thickness: 2 mm number of rolls: 11 straightening feed: 5...30 m/min infeed height: 1250 mm total power requirement: 4,0 kW Kodpeu Ic Ewjfx Afksnc weight of the machine ca.: 620 kg dimensions of machine: 1,15x1,02x1,5 mm dimensions electric cabinet LxWxH: 0,66x0,53x0,32 m Band Leveling Machine with feed equipment: - sideways band guidance rolls model: - band intake height horizontal:1250mm - tiltable: positiv 30°; negativ 15° *

Condition: good (used), Year of construction: 2012, Ref. -No.: 10469 Manufacturer: JAESPA Type: Comfort 420 A Year of construction: 2012 Storage location: Halberstadt Machine-No.: 233XXXXX Weight Of The Machine Ca.: 2500 kg Machine length: 2400 mm Machine width: 2800 mm Knedpfxoxmd S Us Afkoc Machine Height: 1700 mm Bending capacity square tube: 420 x 420 mm Bending capacity round bar: 420 mm Bundle min.: 215 x 65 mm Bundle max.: 420 x 170 mm Flat: 420 x 420 mm Roll diameter: 590 mm Saw band dimensions: 4100 x 1300 x 4780 mm Belt speed: 15 - 100 m/min. Operating pressure: 50 bar Flow rate: 6,5 l/min Tank capacity: 40 liter Coolant content: 50 liter Material support height: 800 mm Saw motor: 5,5 kW hydraulic motor: 0,75 kW coolant pump: 0,12 kW Chip brush: 0,09 kW Chip conveyor: 0,18 kW Measurement standard: DIN EN 23746

Condition: used, Year of construction: 1991, functionality: fully functional, Ref. No.: Lg 35425 Strip Straightening Machine Dreher 1676 BV Used, in good condition Year of manufacture: 1991 Technical Data Passage width: max. 300 mm Material thickness: 0.8 to 4.0 mm Max. material cross-section: approx. 800 mm² Number of feed rollers: 2 Feed roller diameter: 80 mm Feed roller release: pneumatic Number of straightening rollers: 7 Straightening roller diameter: 80 mm Knsdoxn Tqpepfx Afkjc Adjustment of the upper straightening rollers: individually by hand Number of exit rollers: 2 Exit roller diameter: 80 mm Exit roller release: manual Strip speed: approx. 0 to 30 m/min Strip edge guide vertically at the inlet, centrally adjustable. Roller basket at the outlet for strip guidance. Working direction: from right to left. Speed steplessly adjustable via variable speed motor (manual). Loop control via spring switch (start-stop).

Condition: ready for operation (used), Year of construction: 1998, Pressing force: 5000kN, max. operating pressure: 500bar, portal clearance: 2600mm, opening height: 470mm, max. straightening ram stroke: 500mm, min. edge distance: 375mm, rapid traverse: 450mm/min, straightening speed: 45mm/min, return speed: 1100mm/min, feed rate: 12m/min, max. feed force: 5000kN, table height: 1000mm. Machine dimensions X/Y/Z: approx. 4600mm/3250mm/3250mm, weight: approx. 32000kg. Documentation available. An on-site inspection is possible. Knsdpoxlit Ijfx Afkjc

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, number of straightening rollers: 9, product height (max.): 3 mm, straightening roller diameter: 30 mm, working width: 400 mm, coil inner diameter: 360 mm, coil outer diameter: 1,700 mm, workpiece weight (max.): 2,000 kg, Straightening machine with double decoiler and loop Kodpfxjxiyx Nj Afksnc

Condition: used, Year of construction: 1990, material width 150 mm material thickness 0,5 - 5,0 mm no. of straightening rolls 7 straightening roll diameter 45 mm number of draw-in rolls 2 inlet roll diameter 72 mm material thickness / at material width 3,0 / 150 mm material thickness / at material width 4,0 / 120 mm material thickness / at material width 5,0 / 80 mm power requirement 3,0 kW weight of the machine 0,7 t dimensions (WxDxH) 1,3 x 1,1 x 1,6 m with infinitely variable drive, straightening rolls individually manually adjustable, coil loop control via light barriers Knodpfx Afevuk N Hsksc can be inspected in running condition in our warehouse

Condition: used, Technical details: material width: 400 mm material thickness: 2 mm Number of Straightening rolls: oben/upper/arriba: 5x Number of Straightening rolls: unten/lower/abjo: 6x roll width: 410 mm throughput speed: 9-20 m/min total power requirement: 5,5 kW Weight approx.: 1,3 t space requirement of the machine approx.: L:2,1xB:1,0xH:1,35 m description: - upper rolls adjustable around 14mm, not driven - lower rolls not adjustable, driven - each 1 intake/output roll (dia 35x410mm) equipment: - drum intake (L:1,2xW:0,7xH:1,16m), with 4 pcs rolls and guidance waggon Knjdeu Ic Dyspfx Afkoc - 2 intake limits / output limits This straightening machine must be electrically integrated by the customer! *

Condition: used, Year of construction: 2005, For clamping and straightening circular saw blades Circular saw blade diameter: Max. 850 mm Circular saw bore diameter: 22 mm Knedsw U Dvwepfx Afkec saw blade thickness: Max. 5 mm Working speed: < 10 m/s Hydraulic device: 35 bar Connected load: 0.75 kW / 400 V / 50 Hz Dimensions W x D x H approx.: 2080 x 1180 x 1980 mm Weight approx: 450 kg colour: blue

Year of construction: 2000, condition: excellent (used), maker: diverse (Europäische Union) year: 2000 tube Ø: 40 – 150 mm Kodpfx Ajmqkt Tsfkenc wall thickness: 1 – 4 (5) mm reference material (tensile strength): 1.000 N/mm² tube length shop entry: 4 – 10 m tube length shop exit: 4 – 8 m bundle weight: max. 3.000 kg bundle Ø: max. 600 mm working direction: left → right The shop consists of: • tube bundle destacker I with separation MAIR • tube straightender (10 rolls) BRONX type 10Cr.6-BWS • tube bundle destacker II with separation MAIR • wet separator HANDTE • tube bundle destacker III with separation MAIR • tube testing eddy current/ultrasonic ATM/KRAUTKRÄMER/FÖRSTER • multiple-head saw MAIR type MC150/7/10 • tube bevelling machine MAIR • brushing machine MAIR • destacker/stacker MAIR • tube bundle destacker MAIR • tube banding machine MAIR/ORGAPACK • emulsion treatment SCHOENAUER • control Siemens S7 • hydraulics

Condition: used, Year of construction: 1993, Price: On request Coil feed line system, straightener, decoiler Ksdpfswng Ukox Afkenc Manufacturer: ARKU Year: 1993 Decoiler Type: AH 5000/500/MSG-4Q Capacity: 5000kg Working width: 50-500mm Speed: 50 m/min Max coil-diameter: 1800mm Straightener Type: RM 3060.4/9 Number of rolls: 9 Diameter rolls: 30 Capacity: 0,5-6mm Working width: 50-600mm Speed: 50 m/min Needs new PLC (controller in cabinet). Is taken by previous owner for programm. - Year: 1993 - Documentation available: No Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 1966, 5 weight 5 t . Ksdpfx Ajvu Hkaofkonc

Condition: used, Year of construction: 1970, material width 200 mm material thickness 0,5 - 3,0 mm no. of straightening rolls 6 straightening roll diameter 70 mm Kedpsvzxm Hsfx Afkenc number of draw-in rolls 2 diameter of draw-in rolls 160 mm power requirement 3,1 kW weight 1,1 t dimensions (WxDxH) 1,5 x 1,2 x 1,9 m as is where is, WITHOUT putting into operation Price for commissioning (in given condition) on request

Condition: used, Technical details: Ksdpeu Ic D Tofx Afkenc material width: 200 mm material thickness: 1,5 mm Number of Straightening rolls: 5x oben/upper/arriba no. of rolls: 6x unten/ lower/abajo throughput speed: nicht bekannt/ unknown/desconocido m/min current: 220/50 A/Hz total power requirement: 1,5 kW weight of the machine ca.: 0,447 t space requirements of the machine approx.: L:0,88xB:0,76xH:1,26 m description: machine does have 11 rolls upper roll: width: 210mm, dia. approx. 60mm, driven adjustable lower roll: width: 210mm, dia. approx.60mm, driven, not adjustable *

Condition: good (used), Straightening machine, wire straightening machine, unwinder, straightening machine combination, pay-off reel, wire unwinder, double reel, reel, pay-off reel, motor-driven reel for wire processing, punch, eccentric press, hydraulic press, punching machine, motor reel, winding roll, unwinder, wire unwinder -Wire straightening machine: decoiler-straightener combination -Type:not visible -Note: without documentation -Engine: Fukota 1.5 kW Knsdpjin Rn Asfx Afkec -Straightening rollers: for Ø 20 mm, see photos -Receiving rollers: Ø 152/215 x 1330 mm -Total dimensions: 3040/2450/H2525 mm -Weight: 2080 kg

Condition: ready for operation (used), Afrolmachine 5 ton Middenhoogte: 1300 mm Spoellengte: max. 1100 mm Decoiler is verplaatsbaar, gemonteerd op chassis Laadwagen is vast gemonteerd op chassis Kodpfxjwu Inrj Afkjnc

Condition: excellent (used), Year of construction: 2018, operating hours: 2,500 h, Peak Performer 50P.1600 Knsdow Iy Rwopfx Afksc - Pass-through width 1,600 mm - Max. part thickness 0.5–17 mm - Cleaning system For further information, please feel free to contact us.

Condition: used, material width 210 mm no. of straightening rolls 6 Ksdpfxevzxnds Afkjnc straightening roll diameter 40 mm dimensions (WxDxH) 0,45 x 0,6 x 1,1 m Straightening device with height adjustment of base frame

Condition: used, Technical details: plate width: 1000 mm plate thickness: 3,0 mm smallest sheet thickness: 0,5 mm distance between columns: 920 mm Number of Straightening rolls: oben 4x unten 4x Stück / pieces roll diameter: ca. 75 mm number of rollers: 2 oben und 2 unten St. weight of the machine ca.: 6,5 t Kjdpfx Asvgbgasfkjnc dimensions L x W x H: 3,8 x 2,2 x 2,1 m This is a sheet metal straightening machine with hydraulic feed. Further features: 4 straightening top rolls Ø 75 x 830 mm, stroke 20 mm, hydraulic 4 straightening bottom rolls Ø 75 x 830 mm, fixed, hydraulic 4 pull-out rollers Ø 110 x 480 mm, 2x top adjustable approx. 20 mm and 2x bottom, hydraulic Roller support Infeed height 1400 mm Hydraulic system equipment Operated externally Recommendation: complete conveyor system (decoiler + loading device + straightener with hydraulic feed) for sale with optional stock no. 0100572. *

Condition: used, Year of construction: 1982, material width 250 mm Kedpfxevuk Nyo Afkenc material thickness 0,4 - 5,0 mm no. of straightening rolls 9 straightening roll diameter 60 mm speed 3 - 15 m/min material thickness at 250 mm material width 3,5 mm material thickness at 100 mm material width 5,0 mm power requirement 1,8 kW weight 0,9 t dimensions (LxWxH) 1,45 x 1,4 x 1,55 m with infinitely variable drive, centralized adjustment of the straightening rolls, indication via dial gauges, support of the levelling rolls, coil loop control via proximity switch material thickness 3,5 mm at material width 250 mm material thickness 5,0 mm at material width 100 mm can be inspected in running condition in our warehouse

Condition: used, Technical details: plate width: 800 mm coil weight: 12 t sheet width - max.: 800 mm sheet width - min.: 300 mm thickness of strip/band: max. 5,0 mm band speed: 4,5 / 25 m/min work height max.: 1700 mm Payload: 12,0 to (Coil) Weight approx.: 7,3 + 6,62 t Knodpfx Afeu Ic Avskjc dimensions of coil: 3,2 x 1,9 x 2,7 m dimension machine xH: 2,5 x 2,6 x 2,45 m Decoiler with loading device Can optionally be sold together with stock no. 0100571. straightening unit: Infeed rollers: 2 x Ø 144 x 850mm Straightening rolls: 3 x bottom rolls, rigid, Ø 100 x 850mm, 30mm adjustable 3 x top rollers, Ø 110 x 850mm; 30 mm adjustable Coil unwinding machine: Outer Ø 1.500mm Strip width max. 800mm Load capacity max. 12 to Clamping Ø 470 - 630 / 570 - 730mm Transport unit LxWxH: 1700 x 1500 x 1000mm; crosswise running, with prism support 1000 x1000mm Machine will be offered and sold with Stock no. 0100521 as a decoiling and streightening line. *

Condition: used, Year of construction: 1996, material width 500 mm material thickness 0,3 - 3,0 mm no. of straightening rolls 5 straightening roll diameter 40 mm number of draw-in rolls 2 diameter of draw-in rolls 80 mm material cross-cut 600 mm² material thickness at 500 mm material width 1,2 mm material thickness at 200 mm material width 3,0 mm power requirement 4,0 kW weight 2,0 t dimensions (WxDxH) 1,5 x 1,5 x 1,9 m with motor, upper straightening rolls individually manually adjustable, neumatic adjustment of the infeed rolls, coil loop control via ultrasonic sensor as is where is, WITHOUT putting into operation Knodevuum Nepfx Afkoc

Condition: used, Technical details: Kodpfx Aou Ic E Rjfkenc band width: 80 mm plate thickness: 1,5 mm number of rolls: 5 total power requirement: 1,2 kW weight of the machine ca.: 150 t space requirements approx. LxWxH: 1,1 x 0,7 x 1,4 m straightening rolls: - 2 upper rolls, 3 lower rolls - material feed is performed via two compressed air controlled rolls - compressed air connection is not mounted i.D. *

Condition: used, Year of construction: 2001, material width 400 mm material thickness 0,7 - 4,2 mm no. of straightening rolls 7 straightening roll diameter 80 mm number of draw-in rolls 2 + 2 diameter of draw-in rolls 80 mm speed 18 m/min power capacity 2,5 kW weight 0,8 t Dimensions (WxDxH) 1,0 x 1,3 x 1,5 m with motor driven, with coil loop control via contact plate, roll adjustment separately manual Knedpfxevzxqfo Afksc

Condition: used, material width 250 mm material thickness 0,5 - 4,0 mm no. of straightening rolls 9 straightening roll diameter 60 mm number of draw-in rolls 2 Knedpfevzxn Rex Afkjc power requirement 3,8 kW Weight 0,8 t Dimensions (WxDxH) 1,6 x 0,8 x 1,5 m with infinitely variable drive