Used screen printing machine for sale (104)

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: 9972, total length: 4,500 mm, total width: 2,000 mm, type of input current: three-phase, year of last overhaul: 2020, empty load weight: 3,000 kg, Equipment: documentation/manual, The machine was last overhauled in 2020 at a cost of over EUR 70,000!\n\nMACHINE DETAILS\n\nType of incoming power: Three-phase current\nCompressed air connection: 6 bar\nInput frequency: 50 Hz\n\nDimensions & Weight\nDimensions (L x W x H): 4,500 x 2,000 x 2,200 mm\nTotal weight: 3,000 kg\n\nEQUIPMENT\nDocumentation/Manual Bdodpfxoxximhe Abwec

Condition: new, Year of construction: 2024, Combined Exposure Unit, Model 4, 120x145, 3.5kW Max. screen size: 120x145cm, floor space: approx. 250x 190cm, MH quick-start lamp: 3.5kW, connection: 400V/50cycles, CEE-plug, 32ampere. Bsdpfoh Tym Iox Abwedc consisting of steel-tube support with storage board, with 4retractable drawers, with pull-out rails for various sizes of screens, vacuum copying frame with flexible rubber blanket on top, easier lifting of the glass upper frame by gas springs, height-adjustable cross-beam on top with hanging MH exposure lamp model AKTICOP S as well as UV-protection curtain, with light dosing device model AKTITRON S16E, 16programs, equipped with light sensor at the copying frame. Control board at the drying cabinet with vacuum gauge, vacuum reducing valve, operating and control elements.

Condition: new, Year of construction: 2024, Manual Screen Washer, Model 4: 150x220 For max. screen size: 150x220cm, 400V, 50Hz. The unit is ex-protected. The control box ist not ex-protected and must be mounted according to the rules at least 5m away from the unit or must be separated from the unit by a fire-proof wall. Made of aluminium, compl. with solvents storage tank, pump, brush, 380/400V. Bodpfx Abjh Tym Sswodc

Condition: new, Year of construction: 2024, machine/vehicle number: 05004TRW090130, Drying Oven TRW, Model II For drying racks with max. 50rods, useable size 90x126cm, outer dimensions: approx. 2280mm wide x 1570mm deep x 2280mm high, useable space: approx. 1400x1070x1660mm, fixing and drying temperature: up to max. 180°C, connection: 400V, 50Hz, 21kW, weight: 900kg, lacquering: corps RAL 7035 (light grey), doors RAL 7037 (dust grey). ATTENTION: Not permitted for solvents! Bodpjh Tyrwefx Abwedc Chamber dryer, all-steel construction, with good thermal insulation. Simple insertion of drying racks by means of easy-to-open wing doors. The air is sucked out of the drying chamber by ventilators, is blown through thermostat-controlled heating registers and re-fed temperature-controlled to the drying chamber. The horizontal air guide in the drying chamber guarantees an even temperature control. The required temperature can easily be adjusted via actual and nominal value thermostat. Overheating protection by safety thermostat. Particularly suitable for fixing and drying of textile inks and flock glues up to 180°C. - Various drying racks for different applications available. - Special varnishing upon request. ATTENTION: Not permitted for solvents! Not permitted for foods!

Condition: new, Year of construction: 2023, Semi-Autom. Screen Printing Machine TIC SC1000 OptiPass Curve printing machine, stand model, printing size: 200x700mm or printing ø: 600x700mm (Attention: when ø 600mm no 360° all-round printing possible), max. screen frame size: 930x530x30mm. Machine with base frame and height-adjustable feeding table incl. x/y-adjustment. Height adjustment of the feeding table: approx. 250mm, therefore max. height of the printing object: approx. 600mm. With safety frame all-around the sides of the upper frame, equipped with 2sets of squeegee, motor-controlled lateral frame movement for curve printing and rotation of the printing object, machine control via touch-panel, registering by optical sensor, when printing in multi-colour-mode register accuracy is approx. 1mm, drive components 'Made in Japan', compressed air connection: 6bar, supply voltage: 230V, 50Hz Bedpfxehrdn Io Abwodc Electro-pneumatic machine, micro-processor control. Curve printing machine with universal reception for cylindrical objects as well as optical fitting system for multi-colour printing, with inflation device, printing movements separately adjustable during set-up operation, squeegee stroke, squeegee speed and floodbar infinitely adjustable Delivery time 16-18 weeks

Condition: new, Year of construction: 2024, For max. screen size: 120x145cm, connection: 400V, 50Hz, 6kW Bjdpfxeh Tymrj Abwjdc Sturdy drying cabinet in full steel construction, with 5 drawers smoothly moving on ball bearings. Good air circulation, with thermostat and timer, with white plastic-coated plate on top, can be used as deposit place.

Condition: new, Year of construction: 2024, Drying and Burn-in Furnace TRO, Model I For drying racks with max. 50rods, useable size 60x90cm, outer dimensions: approx. 2290mm wide x 1390mm deep x 2230mm high, useable space: approx. 1400x1070x1660cm. Suitable for vaporisation of low amounts of solvent, authorised for inks and solvents up to hazard class A II, according to safety requirements DIN EN 1539. Equipped with control of the minimum exhaust volume and a heating system in regard to the exceedance of the max. temperature. Fixing and drying temperature: up to max. 180°C. Power connection: 400V/50Hz, 21kW, weight: approx. 650kg, varnishing: corps RAL 7035 (light grey), doors RAL 7037 (dust grey). Special varnishing upon request. Bedpsd I T Exefx Abwedc Chamber dryer, all-steel construction, with good thermal insulation. Simple insertion of drying racks by means of easy-to-open wing doors. The air is sucked out of the drying chamber by ventilators, is blown through thermostat-controlled heating registers and re-fed temperature-controlled to the drying chamber. The solvents released during the drying process are dissipated from the exhaust side of the ventilator while supply air gets into the drying chamber. The horizontal air guide in the drying chamber guarantees an even temperature control. The required temperature can easile adjusted via actual and nominal value thermostat. Overheating protection by safety thermostat. Particularly suitable for fixing and drying of textile inks, flock glues as well as for burning-in of plate and aluminium signs up to 180°C. - Various drying racks for different applications available. - We recommend the installation of a gas warning unit. Delivery time 10-12 weeks. ATTENTION: Not permitted for solvents! Not permitted for foods!

Condition: as good as new (ex-display), Semi-automatic Universal Screen Printing Machine TIC SCF 550 DHE Bjdpjw N N Iuefx Abwodc Flat and rotary printing machine, floor-standing model, printing format 300 x 450 mm or printing diameter 160 x 300 mm, max. screen frame size 730 x 530 x 30 mm. Machine comes with base frame and height-adjustable feed table with XY-adjustment capabilities. Height adjustment of feed table approx. 300 mm, allowing a max. print object height of approx. 450 mm. Upper frame with continuous lateral safety guard, equipped with 2 squeegee sets, requires 6 bar compressed air, connection: 230V, 50Hz. Unused demonstration model. Electro-pneumatically controlled machine with microprocessor control. Flatbed printing with T-slot table plate (option: vacuum table plate with vacuum pump), rotary printing with universal holder for cylindrical items as well as rack-and-pinion drive for multi-color printing, including inflation device. In setup mode, print movement can be adjusted individually. Squeegee stroke, squeegee pressure and flood coater are steplessly adjustable.

Condition: new, Year of construction: 2024, Retouching and Coating Stand, 140x180 Bdsdoh Tymvopfx Abwoc for max. screen size: 140x180cm, 230V, 50Hz With illuminated back panel, white and yellow light, top and bottom clamp rail, height-adjustable, made of synthetic material, with steel-tube stand.

Condition: new, Year of construction: 2022, machine/vehicle number: 20b015, Fully Automatic Printing Tower for Crate Printing on 4sides Electro pneumatically controlled fully-automatic screen printing machine for rotary printing, with microprocessor control, equipped with feed, printing and ejector station, pneumatic squeegee pressure adjustable via manometer, pneumatic squeegee switching, with squeegee quick clamping system, squeegee stroke, adjustable squeegee pressure. Printing movements individually adjustable when working in one-shift operation. All four sides of the crate will be printed at the same time in different colours and motivs. 800crates per hour enable a precise reproduction ability and a high productivity. Special hose pumps apply the ink onto the horizontal positioned screen frames. In that way each side of the crate gets an even ink application. Bedpfx Aoihccfjbwjdc The screens can be exchanged within minutes which, in turn, reduces the holding time. The multi-functional system of the printing tower makes a change of both logo and ink possible within short time thus enabling short set-up times. A modern electronic control via display ensures the requested process control and helps analysing any faults. The step-by-step operation mode show the printing status during the automatic production run resp. during the set-up by the operator.

Condition: refurbished (used), Year of construction: 2006, 3/4-automatic screen printing machine THIEME 3010 special model Bodpfx Abor Izhuswjdc Printing format 55 x 75 cm, screen frame format 100 x 110 cm, parallel lifting machine with extendable vacuum table plate, special version with gripper system, rear delivery, suitable for channel with long infeed or for cross-positioning at a drying channel. The rear part of the gripper extends the machine by 170 cm at the back. Electromechanical machine with pneumatic squeegee pressure control, separate control panel, can be operated from the left or right side, complete with 3 sets of printing and flood squeegees, used, model year 2006, fully refurbished and repainted, in good technical and visual condition.

Condition: used, Semi-automatic screen printing machine SIRIMAC 4560E Electromechanical machine with parallel lifting upper frame, print area: 45 x 60 cm, vacuum table plate: 60 x 80 cm, screen size: 75 x 100 cm, screen up-and-down motion via geared brake motor, with cross-travel squeegee system, motorized and adjustable squeegee drive, print and flood speed independently adjustable, adjustable squeegee stroke via limit switch, with pneumatic squeegee reversal, pneumatic squeegee and flood squeegee pressure adjustable via manometer, print and flood squeegees with quick-clamp system, adjustable screen lift, with pre-vacuum function, single-stroke or automatic print mode selectable, pre-squeegee function, multiple print, connection: 400V, 50Hz, 10A, compressed air 6 bar required, used condition. Bedpfx Ajw N N Arsbwsdc

Condition: as good as new (ex-display), Year of construction: 2024, Semi-Automatic Universal Screen Printing Machine SFM 650 DHE Flat printing machine with parallel liftin gupper frame, printing size: 400x600mm, with motor squeegee motion and height-adjustable feeding table incl. x/y-adjustment, adjustable slot stone printing bed 650x950mm. Height adjustment of the feeding table: approx. 300mm, max. height of the printing object: approx. 450mm. Machine with base frame and safety bar sideways, required compressed air: 6bar, supply voltage: 230V, 50Hz. Electro-pneumatic machine, micro-processor control. Screen printing machine for flat printing, with slot stone printing bed (option: vacuum printing bed with vacuum pump), printing movements during set-up operation separately adjustable, squeegee stroke, squeegee pressure and floodbar infinitely adjustable. Delivery time 2-3 weeks Bdsdpfx Ajc Nf Huebwjc

Condition: repair required (used), Manufacturer: Thieme Model: 3020 L Bdjdpfx Absx H Rybswsc Table size: 100 x 130 cm Electrical inspection required!

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, input voltage: 230 V, total length: 6,200 mm, total width: 2,000 mm, total height: 2,400 mm, compressed air connection: 6 bar, type of input current: AC, overall weight: 1,300 kg, input current: 32 A, conveyor belt width: 120 mm, Equipment: documentation/manual, Screen printing machine for bottles, glasses, and plastic items, CNC controlled, hourly output 800–1000 items, single-color with registration function, equipped with infeed and outfeed conveyors. Robotic arms included. Connected to a UV dryer with Fusion lamp, 250 W/cm, 250 mm reflector. The machine was primarily used for printing on glass bottles. All information and inquiries will be explained by email or phone. Machine and dryer can also be sold separately. Bdodpfx Ajx Hqu Ssbwec

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: PL071105402R, M&R dryer with a belt width of 122 cm. The dryer is in excellent condition and is powered by electricity. The belt is wide enough to accommodate two rows of textiles side by side! We have already dismantled the dryer and prepared it for shipping. Therefore, there are no dismantling costs. We will also handle the loading onto the truck. A shipping company is available on site. The shipping price depends on the destination. We recommend direct transport! Bdjdpfx Asw Stp Iobwoc

Condition: ready for operation (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: 22100304, total length: 10,900 mm, total width: 2,840 mm, total height: 1,142 mm, overall weight: 4,000 kg, Equipment: documentation/manual, No reserve price – guaranteed sale to the highest bidder! Through-feed dryer including exhaust ducts (each approx. 7.5 m) in double-walled stainless steel design! MACHINE DETAILS Max. solvent throughput: 5.00 kg/h Air and exhaust specifications Pipe diameter: 150 mm Exhaust air volume: approx. 900 m³/h Temperature: max. 180°C Bdedpox Arq Dsfx Abwsc Pressure loss: max. 100 Pa Fresh air volume: approx. 1,800 m³/h (Σ) Dimensions & Weight Dimensions (L x W x H): 10,900 x 2,840 x 1,142 mm Total weight: 4,000 kg Input voltage: 400 V Input current: 22 A EQUIPMENT Documentation/manual Exhaust ducts (double-walled stainless steel version, each approx. 7.5 m)

Condition: new, Year of construction: 2025, functionality: fully functional, input voltage: 400 V, total length: 3,000 mm, total width: 1,500 mm, total height: 2,200 mm, compressed air connection: 6 bar, type of input current: AC, overall weight: 1,500 kg, 1. very precise, fully automatic screen printing machine with an automatic feeder feeder that positions the sheet with an accuracy of 0.08mm. The integrated CCD camera recognizes a hole or a print mark and positions the screen with an accuracy of 0.02mm to the print mark. Bodpfx Aoqu Udwjbwjdc 2. welded steel frame and highly dynamic servo axes for maximum precision and smooth running 3. the printing table is made of cast aluminum with a flatness of ± 0.1 mm per meter 4. all guides are hardened linerar guides for a long service life 5. an integrated, controlled pneumatic squeegee pressure compensation, which acts directly on the individual squeegee holders, is able to level out even the smallest unevenness in the printed material. 6. the material is kept in a floating state during application and removal, which guarantees scratch-free transportation.

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, Print format: 600 mm x 900 mm Max. sheet format: 650 mm x 950 mm Max. screen frame format: 700 mm x 2160 mm x 40 mm Table size: 700 mm x 1000 mm Cycle rate: 1200 pieces per hour Machine dimensions (L x W x H): 1600 mm x 1080 mm x 1700 mm Squeegee and presqueegee adjustment: 40 mm Infinitely adjustable squeegee angle: +/- 10° Bodpfxsdx Raqe Abwsdc Adjustable snap-off: 0 - 40 mm, stepless Main frame fine adjustment: +/- 15 mm Max. material thickness: 0 - 40 mm Machine weight: 600 kg Connected load: 400 Volt / 50 Hz - 3 kW Air connection: 6 bar

Condition: as good as new (ex-display), Year of construction: 2023, operating hours: 150 h, input voltage: 400 V, total length: 6,000 mm, total width: 1,260 mm, total height: 2,130 mm, compressed air connection: 6 bar, type of input current: AC, overall weight: 2,500 kg, input current: 32 A, conveyor belt width: 550 mm, warranty duration: 12 months, roll width: 500 mm, 1. very precise fully automatic screen printing machine, which positions the motif with an accuracy of 0.03 - 0.05mm to the material. The integrated sensor recognizes the edge or print mark and positions the screen with an accuracy of 0.02mm to the sheet or print mark. It prints from roll to roll with unwinder + rewinder. UV drying and hot air drying up to 160 degrees Celsius are integrated 2. welded steel frame and very dynamic servo axes for maximum precision and smooth running Bdedjqu R Skopfx Abwec 3. the printing table is made of cast aluminum with a flatness of ± 0.1 mm per meter 4. all guides are hardened linerar guides for a long service life 5. an integrated, electronically controlled pneumatic squeegee pressure compensation (option), which acts directly on the individual squeegee holders, is able to level out even the smallest unevenness in the printed material.

Condition: good (used), Year of construction: 2002, machine/vehicle number: 0102002, Semi-automatic angle opening Very good condition 3 months functional guarantee Print format: 1000 mm x 1500 mm max. sheet size: 1050 mm x 1550 mm max. screen frame: 1370 mm x 1850 mm Squeegee pre-squeegee height adjustment: 40 mm Squeegee angle adjustment stepless: + / - 50 - 90 ° Support bar height adjustment: 0 - 100 mm stepless Maximum material thickness: 100 mm Machine weight: approx. 1500 kg connected load: 400Volt/50HZ - 5KW Air connection: 6 bar Bdedpfxsrllhkj Abwec options: pneumatic screen frame clamping Squeegee pressure compensation adjustable via pressure regulator Stainless steel pressure plate Blowing air device All data without guarantee

Condition: used, Year of construction: 1998, Technical data: Material width: min. 100 mm, max. 340 mm Printing width: max. 325 mm Print repeat length: min. 101.6 mm, max. 355.6 mm Bjdpfxoxnrdhe Abwsdc Machine components: • Corona treatment • Turn bar • 3× screen printing units • Hot foil stamping unit • 1× screen printing unit • Flatbed die cutter • 1× screen printing unit

Condition: used, Year of construction: 2007, functionality: unexamined, total length: 6,100 mm, total width: 3,700 mm, Used screen printing machine CNC Balsfulland 100 with 4 print units. Installation of a UV lamp holder in place of the 4th print unit 1 pc. UV lamp Manufacturer: UVITERNO Type: Mono DSK-SE 7525 with EVO-Plus incl. exhaust fan Lamp length: 200 mm Bjdpext Urxefx Abwodc Lamp power: 200 W/cm 1 pc. external pretreatment station Manufacturer: GST, Type: VSP, Year of construction 2017 Consisting of: Curve conveyor belt with robust steel base frame and SEW drive motor Hill burner system with 1 burner, burner length: 200 mm Lifting and turning station, servo-pneumatic Siemens S7 control with touch display Safety device

Condition: ready for operation (used), Year of construction: 1995, functionality: fully functional, Full line screen printing machine Trumax Feeder Sakurai SC 102 DX - 1995 - stop cylinder model Trumax 2 Lamps UV dryer with hot air module Trumax Hyperstack Max speed 5500 per hour ! Full documentation Max size of sheet1050 x 750 мм. Bdsdpfoymv Dkox Abwjc Min size of sheet Около 420 x 297 мм. Printing size1020 x 700 мм. Thickness 0.1 to 0.8 мм.

Condition: like new (used), Year of construction: 2018, functionality: fully functional, DESCRIPTION The STARPRINT is a flat bed semi-automatic printing machine, compact, capable to print in all the types of surfaces until a maximum thickness of 20mm, therefore the machine was a plate that is adjustable in height. Possibility to work 3 methods: automatic; cycle and manual. STARPRINT TECHNICIAN DATA Printing size (depth* width) cm 50x700 Maximum size from screen (depth* width) cm 94x110 Dimension printing table (depth* width) cm 82x105 Vacuum area (depth* width) cm 62x85 Bdsdpfott I Sijx Abwec Height from working platform cm 90 Maximum production pieces per hour 900 Out. dim. (width*depth* height) cm 152x144x120 Installed power Kw 1,5 Working air pressure BAR 5-6 Weight Kg 420 Voltage V 400 Air consumption L/h 190