Used Sorting equipment for sale (48)

Year of construction: 2007, Condition: excellent (used), Functionality: fully functional, Electromagnetic belt separator IFE MEL 1400 length: 3200mm width: 1200mm Year of manufacture: 2007 Protection class of magnetic housing IP65; Magnet power 7.55 kW; Dkjljpcf Etsn U U Eiel Material flow rate 1.8 m/s; Drive power 4 kW; Control voltage 230 V; Operating voltage 3x400 V; Frequency 50 Hz; cylinder diameter: 500mm Total weight: 6480 kg Adjusting the device belt and tension

Condition: new, TC23072, OPTO Engineering, Bi-telecentric lens for 2/3" detectors Model: TC23072 Condition: New Djlnjtyx Swe U U Eijkl

Year of construction: 2015, Condition: reconditioned (used), Technical data Feed hopper with hydraulic moving floor and bag opener: Manufacturer BRT HARTNER GmbH Type HP5-3035 Year of construction 2015 Hopper volume 30 m³ Drive line 17.5 kW Dimensions in current state 13,200 x 3,050 x 4,350 mm (l x w x h) Condition of the machine: The feed hopper with bag opener was in use at a large recycling company, where waste in bags was tipped into the hopper with wheel loaders and the bags were opened via the bag opener and the waste was conveyed in doses for further processing. The system worked perfectly until it was dismantled and was replaced by a larger system with a higher throughput capacity. The machine is in good working condition. On request, various spare parts can be purchased for a separate, additional fee. The buyer would have to dismantle the elevation for removal, as the machine is otherwise too high. Comments: Dkeln U Ueu R Rtbe Eiol The machine is currently being overhauled in our workshop. The photos show the machine in the current overhaul phase, so the system has not yet been fully reassembled. Once the overhaul work has been completed, probably in February 2025, the machine will be tested in operation without the use of materials. The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: used, No. 10012 Feed hopper Rema Used Doln U Uev N E Iye Eiokl Metal plate conveyor / steel plate belt Defective gearbox (Bonfiglioli) Drive power 15 kW Belt width 2000 mm Axis length 10000 mm The system has been out of operation since the end of January 2025 due to gearbox damage Without output conveyor Transport dimensions approx. 15000 x 3000 x 4000 / 5500 mm LWH Sale on behalf of customer, ex location near 78628 Rottweil, without dismantling, without transport and assembly Errors in description and price excepted Dismantling, transport and loading by us optionally possible To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale Any warranty is excluded for used machines, the following applies: “purchased as viewed” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex location

Year of construction: 2021, operating hours: 400 h, Condition: like new (used), Functionality: fully functional, Electrostatic separator (corona) - EBS-4-271200 - builded to extract the metals from the rejection of the plastic from electric cable process Including additional options: - 3 screw transporters; - 3 m3 input hopper; Doln U U Ejwcp I Aeijkl - mechanisms for changing material flow and stand for big bag for mix collection; - touch screen for control cabinet english / rusian language; - set of spare parts Designed for dry high-efficiency separation of materials, that are differ in their electric properties: - mixtures of plastics and metals, including shredded cables, into metal (copper, aluminium), and non-conducting material (plastic); - mixture of different materials, provided that one of the components has conducting properties (extraction oftextilecord from rubber crumb in the processing of used tires ); - shredded WEEE (including PCB’s) into metal (aluminium, copper, nickel, bronze, and other) and nonconducting materials (plastic, textolite, fiber-glass plastic, and other), and also for: - separations of non-metal raw material (feldspar, pegmatite, quartz sand); - enrichingofdroughconcentratesofores of rare metals (titan-zirconia, tantalum- niobic, tin-tungsten, monazite), ores of precious metals (gold, silver); - benefication of diamond ore. The equipment was purchased at the end of 2021 directly from the prestigious manufacturer PRODECOLOGIA, direct concurence of HAMOS Germany, which also installed it in our factory. The equipment works perfectly and can be tested at any time with PVC plastic, from our Guidetti plant for electric cable recycling. Upon request, we can also provide installation + commissioning at the buyer's location. PRICE : 108 000 EURO- netto

Condition: ready for operation (used), Archive photo Machine is currently being refurbished, delivery time 3 months Sorting machine for sorting out all non-ferrous and ferrous metals The machine can sort out ferrous metals separately, ferrous iron does not have to be separated out beforehand. Test sorting in the Habdaufkege process possible. The machine will be demonstrated in working order. The sale is without guarantee and warranty, commissioning possible worldwide for an additional charge. Dksloiqk Aqen U U Eisl

Condition: good (used), metal detector S+S for sorting metal parts from a material flow. The material passes through a chute and the metal parts exit from another chute. chute inlet 70mm . Doln U U Eetu Nnuoiekl sold with stand, height 2m.

Condition: used, TC23072, OPTO Engineering, Bi-telecentric lens for 2/3" detectors Model: TC23072 Condition: Used Dkeln U Ujtu U Eis Eijl

Condition: used, Overview of the equipment of a used sorting plant, year of construction 2009, with a sorting capacity of 25,000 t/year For sale is a complete used sorting plant for deinking paper, which can also be used for other materials. The plant consists of the following components: 1 piece sorting cabin with an integrated office (control room), external dimensions 14,200 x 11,400 x 4,350 / 8,170 mm (l x w x h), with 3 sorting belts and 10 sorting places, air-conditioned (heated). 1 piece ventilation system for the sorting plant with 17,600 m³/hour, manufacturer VTS Ventus, type VS-120-R-H/S 1 piece infeed conveyor belt, right, no. 10, dimensions 7,360 x 1,200 mm, drive power 3 kW 1 piece infeed conveyor belt, centre, no. 11, dimensions 7,360 x 1,200 mm, drive power 3 kW 1 piece infeed conveyor, left, no. 12, dimensions 6,360 x 1,200 mm, drive power 3 kW 1 piece sorting belt, long, right, no. 15, dimensions 8,350 x 1,200 mm, drive power 2.2 kW 1 piece sorting belt, short, right, no. 17, dimensions 4,350 x 1,200 mm, drive power 1.5 kW 1 piece sorting belt, long, centre, no. 14, dimensions 8,350 x 1,200 mm, drive power 2.2 kW 1 piece sorting belt, short, center, no. 16, dimensions 4,350 x 1,200 mm, drive power 1.5 kW 1 piece sorting belt, left, no. 13, dimensions 5,360 x 1,200 mm, drive power 2.2 kW 1 piece reversing belt, below sorting belts 14 and 15, no. 18, dimensions 5,200 x 1,000 mm, drive power 2.2 kW 1 piece discharge belt (short), no. 17, dimensions 4,350 x 1,200 mm, drive power 1.5 kW 1 piece discharge conveyor, no. 23, dimensions 8,300 x 1,000 mm, drive power 3.0 kW 1 piece bunker belt BB1 (from Hartner ballistic separator) dimensions 25,400 x 2,000 mm 1 piece bunker belt BB2, dimensions 24,000 x 2,000 mm 1 piece bunker belt BB3, dimensions 24.000 x 2.000 mm 1 piece bunker belt BB4, dimensions 11,000 x 2,000 mm 1 piece long discharge conveyor to the warehouse, No. 22, dimensions 28,200 x 1,000 mm, drive power 9.2 kW Technical data of the ventilation system for the sorting cabin: Manufacturer VTS Ventus, Poland Type VS-120-R-H/S Min. air capacity 5,815 m³/hour Max. Air flow rate 17,610 m³/hour Connected load 108 kW Static pressure 837 Pa Dkelju Tg Tyen U U Eiel Stand-by pressure 600 Pa Filter designation VS 120 B.FLT F5, type EU5 Filter size 592 x 287 mm Remark: The plant is located in Germany, is still fully assembled, connected to electricity and could be inspected in operation (without material input) if required. The sale of the plant takes place ex location, Germany. The dismantling and loading of the entire plant as well as the broom-clean handover of the hall is at the risk and expense of the buyer. Technical documentation for the system and the components is only available in German. An inspection of the plant is possible by arrangement. We do not accept any liability for the technical details or any errors.

Condition: new, Year of construction: 2025, overall weight: 1,000 kg, power: 1.1 kW (1.50 HP), The Mizar Dosage Bunker is an essential solution for the precise storage and dosing of bulk materials in various industries, including recycling, food processing, and manufacturing. It ensures secure material handling while allowing for accurate and controlled dispensing, improving efficiency and reducing waste. ✅ Precision Storage & Dosing – Ensures accurate material flow control. Doln U U Esv Rvm Ajijkl ✅ Heavy-Duty Construction – Built to withstand harsh conditions and heavy loads. ✅ Adjustable Outlets & Weighing System – Allows operators to control material flow with high accuracy. ✅ Seamless Integration – Easily fits into existing production lines for optimized workflow. ✅ User-Friendly & Safe – Equipped with safety mechanisms and easy-to-use controls. Dosage width: 750mm Dosage length: 1950mm Dosage height: 1250mm Dosage weight: 1000kg

Year of construction: 2009, Condition: good (used), Functionality: fully functional, machine/vehicle number: 101173, NFE/ FE separation system Djln U Ujry Ugvj Eiskl

Condition: ready for operation (used), Sorting machine to sort out all metals NF and FE The machine can sort out Fe metals separately,Fe iron does not need to be sorted out before. Few operating hours, test sorting in the Habdaufkegeverfahren possible . The machine is demonstrated in working order. The sale is made without warranty and guarantee . commissioning worldwide against surcharge possible. Dkoln U U Eomccu Djiel

Year of construction: 2002, Condition: good (used), Functionality: fully functional, Wagensveld machine and steel construction – sorting cabin Broeckx Plastic Recycling B.V. This sorting cabin was put into use in 2002 for the manual sorting of industrial plastic waste. - Closed sorting cabin - Feed belt (slowed) - Sorting belt (4 speeds) - Waste discharge belt Delovbh Eljn U U Eiokl - 7 sorting bunkers 32.5 m3 - 1 dump bunker - 12 sorting places

Condition: ready for operation (used), Semi automatic sorting line with 1 waste pocket and two size pockets. Line is equipped with metal detector Mesutronic. Sorting process is controlled by operator. Fully working line with hydraulic station and electrical cabinet included. Video of working process available by request. Working diameters 100-500 mm Dkolnev Nwrws U U Eisl

Condition: used, For sale is a sorting plant for commercial waste, paper, cardboard, plastics etc., year of construction 2022, only 151 operating hours, with a sorting capacity of up to 20,000 tonnes/year, in two-shift operation. The plant consists of the following components: 1 piece feeding / dosing hopper with steel slat conveyor and a dosing drum, manufacturer Bollegraaf, type BDF-1200/2000 1 piece ascending conveyor between the feed hopper and the sorting cabin, manufactured as a troughed conveyor, manufacturer Lubo Systems, type TBM 2000 x 15000 1 piece sorting cabin, air-conditioned (heated), measuring 14,500 x 5,732 x 3,270 mm (l x w x h), with 4 sorting stations, 8 discharge chutes and 5 material bunkers underneath. The concrete blocks are not included in the scope of delivery of the sorting system. 1 piece sliding belt conveyor as sorting belt, manufacturer Bollegraaf, type HBGT 250/1400 * 15000 1 piece ventilation system for the sorting plant with an air capacity of 8,000 m³/hour, heated with 93.8 kW electrical heating power, manufacturer MANDIK. The area required to install the sorting system in its current configuration is at least 46 x 7.5 m (345 m²). The height of the sorting cabin including the ventilation pipes is 7,370 mm. Remark: The system is located in Germany, is still fully assembled, connected to electricity and could be inspected in operation (without the use of materials) if required. The plant is sold ex works. The dismantling and loading of the entire system as well as the broom-clean handover of the hall is at the risk and expense of the buyer. The owner can provide sporadic logistical support during dismantling with forklift trucks, wheel loaders and excavators. Technical documentation for the system and the components (operating instructions, CE declaration, electrical and hydraulic circuit diagrams) is only available in German. The existing control cabinet controls all of the customer's machines in two halls and is therefore not included in the scope of delivery of the sorting system. The control cabinet is disconnected on site, dismantled and remains with the previous owner in order to be able to continue operating the remaining systems on site. Only the frequency converters for the individual machines of the sorting plant are included in the scope of delivery. The concrete blocks under the sorting plant are also not included in the scope of delivery and remain with the previous owner on site. Dolou Tg S Ajn U U Eiskl A viewing of the plant is possible by appointment after the prospective buyer has sent the complete company details (self-certification) and a subsequent credit check. We accept no liability for the technical details or any errors.

Year of construction: 2019, operating hours: 1,200 h, Condition: ready for operation (used), Functionality: fully functional, machine/vehicle number: 6223, Kiverco Ps122 picking station for sale Machine has the following options Djln U Uev Ew N Uo Eijkl - Overband Magnet - Wind shifter (option) - Emergency stop Pull Cord in picking cabin - Auto-Grease Dispensers Fitted to Each Bearing - Heated cabin - Hydraulic system for set up - Generator (optional) - Unbraked wheeled site axle

Condition: excellent (used), Year of construction: 2011, Functionality: fully functional, machine/vehicle number: 87118109, overall weight: 2,700 kg, type of input current: AC, power: 0.004 kW (0.01 HP), Equipment: documentation/manual, Sorter in working order complete length 2.77 m width 1.7 m height 0.9 m Djlnery Udas U U Eiskl

Year of construction: 2018, Condition: as good as new (ex-display), machine/vehicle number: TMA420x280mm, Drum magnet - Magnetic separator in the housing including separating plate, drive and gearbox + high quality stainless steel execution + Separating plate for separation + Shaft bracket in the form of a storage unit + Pillow block units Dimensions: L: 420mm B: 280mm H: 380mm Dslnjdzqxbo U U Eijkl Inlet: 365x80mm Drum: Ø 220x400mm

Year of construction: 2011, operating hours: 2,500 h, Condition: good (used), machine/vehicle number: L10022-011, Redox Windsifter/ windsichter Hook container/ hacken lift Dslsunag Den U U Eiokl vibrating feeder moveable separating drum 9095 mm total length 2642mm total working width adjustable legs westeria, nihot, walair

Condition: good (used), Functionality: fully functional, Heavy duty schredder 15 KWA. Was used for schredding paper waste. Djljvzxizen U U Eiekl Price by request.

Condition: as good as new (ex-display), Year of construction: 2022, Functionality: fully functional, machine/vehicle number: GBS 275/2040/2400/10, LUBO StarScreen GBS 275/2040/2400/10 Dkeln U U Eeqwddpeiol 10 axles, S355 welded star axles Per axle, 33 ST. 250MM rigid and 33 ST. 262MM rigid Center-to-center distance shafts: 241.3

Year of construction: 2012, Condition: excellent (used), Functionality: fully functional, machine/vehicle number: 5000-L-G555B-L-G555B, Optical separator Best configured to work on optical separation of plastics and electronic board. It perfectly copes with the separation of colors of fractions of the flake size range 15-34 mm dtr documentation Dsln U U Ejry T E Reiskl serviced by authorized service Machine working possible tests on site capacity for electronic board 300 kg / h

Year of construction: 2018, Condition: as good as new (ex-display), machine/vehicle number: TMA500x600mm, Drum magnet - Magnetic separator in the housing including separating plate, drive and gearbox Dkslnodzqw As U U Eijl + high quality stainless steel execution + Separating plate for separation + Shaft bracket in the form of a storage unit + Pillow block units Dimensions: L: 800mm B: 800mm H: 820mm Inlet: 600x250mm Drum: Ø 500x600mm

Year of construction: 2018, Condition: like new (used), machine/vehicle number: TMA420x280mm, Drum magnet - Magnetic separator in the housing including separating plate, drive and gearbox + high quality stainless steel execution + Separating plate for separation + Shaft bracket in the form of a storage unit + Pillow block units Dimensions: L: 420mm B: 280mm H: 380mm Inlet: 365x80mm Dkslnjc Tnh Ds U U Eisl Drum: Ø 220x400mm

Year of construction: 2019, Condition: excellent (used), Plate magnet, lifting magnet, overbelt magnet, police magnet, magnetic filter, magnetic separator Overband plate magnet Execution in VA 1.4301 tightly welded NEODYMIUM MAGNETIC CORE, very adhesive! Dimensions: 620x520x200mm Dkjlehuphron U U Eisl 4 - piece M16 eyebolts on the back This lifting magnet was used by one of our customers as a "police magnet" in the meat processing industry. The price mentioned refers to 1 piece. Currently only 1 piece available from stock! All information without guarantee, only while stocks last! Conveyor belt, conveyor belt system, discharge belts, belt conveyor, magnetic separator, overbelt magnetic separator, recycling, wood chips, plastic, metal-free metal detection, neodymium, overbelt magnet, magnetic belt separator Our core competence lies in supplying the customer with exactly what he really needs. Together with our customers, we work out customer-specific, individual solutions and supply corresponding systems from our own production. Feel free to contact us by phone to find a suitable solution for your application. Overband plate magnet Execution in VA 1.4301 tightly welded 420x420x200mm 420x420x250mm 620x420x200mm 620x520x200mm 820x520x200mm 820x520x250mm Completely welded stainless steel housing to protect the magnetic core Ring eyelets for hanging Cleaning drawer for easy removal of accumulated impurities. Installation above all conveyor systems possible...