Used Wood shredder for sale (379)

Condition: new, Year of construction: 2025, Weima single shaft shredder type WL 6 Power 18,5 kW Our machine concept WL 6 The Weima high performance shredders with their flexible can process all kinds of wood materials (hardwood, softwood, chipboard, MDF materials softwood, chipboard, MDF materials, plywood, veneer residues etc. ) into and, in the case of bulky materials, achieve an enormous volume reduction of the material. enormous volume reduction of the material. Mode of operation: The machine is equipped with a large hopper and can be fed by a conveyor belt or by hand. fed by means of a conveyor belt or by hand. This hopper can be adapted to individual needs and guarantees a continuous and cost effective and cost effective material feed without the need for manual assistance. manual assistance. Technical specification WL 6 / 18.5 kW hopper opening: 800 x 1.000 mm hopper capacity: 0,9 m³ working width of the rotor: 800 mm diameter of the rotor: 252 mm Driving power: 18,5 kW Rotor speed: 80 -120 rpm Number of knives: 42 pieces type and size of knives: concave / 40 x 40 mm, cutting reversible crowns Sieve perforation: 10-60 mm possible (standard 15-20 mm) Painting: WEIMA standard RAL 2002 / 7016 connected load: 400 V +/- 5% / 50 Hz Djb Eneh Hnp Dea Nrjkl weight: approx. 1.600 kg Included: - Switch cabinet ( Rittal ) incl. electrical control ( Moeller / Siemens ) and star-delta start-up - Rubber oscillating elements - V - rotor ( patented ) with knife pockets fixed in the profile - gear limit switch - Contact pressure

Condition: excellent (used), Engine 30 kW Inlet 90/120 cm Shaft diameter 30 cm reinforced shaft Dksb Eowgniaona Nrjl

Condition: good (used), power: 22 kW (29.91 HP), UNTHA RS30 4S four-shaft chipper Only 515 operating hours Drive power: 2 x 11 kW Operating voltage: 400 V; 50 Hz Funnel opening - Cutting unit opening: 460 x 570 mm Number of cutting shafts: 4 Main shaft rotation: approx. 23 rpm / 4,600 Nm Side shaft rotation: approx. 35 rpm / 3,100 Nm Perforated screen diameter: 40 Chopping capacity with screen hole diameter: 15-20 mm: 350-550 kg/h 25-30 mm: 550-850 kg/h 35-40 mm: 850-1,250 kg/h without screen over 1,250 kg/h Dkob Ejwd Ewiena Nrol Suction nozzle 200 mm Feed hopper: sturdy welded steel construction Machine feet: solid white steel construction Overall dimensions: length x width x height: 1,300 1,000 x 1,970 mm Weight: approx. 1,300 kg

Condition: used, power: 110 kW (149.56 HP), Material feed is vertical or with a wheel loader via a feed hopper with 6 horizontal augers. Inlet opening: approx. 1000 x 1700 mm Rotor width: approx. 1000 mm Dob Ena Njwbuc Nsrjkl Rotor diameter: approx. 1000 mm Stator blades: 2 Rotor blades: 10 Drive: 110 kW

Condition: new, Year of construction: 2024, Year of manufacture: 2024/1 Deb Enjrq Eufoa Nrjkl Engine power: 18.5 kW Speed: 90 1/min Weight: 1.3 tons Rotor lengths: 600 mm Rotor diameter: 252 mm Rotor knives: 28 pcs Funnel: 600 x 1050 mm Additional equipment: 4-sided ribbed sliding plate and double row of knives

Condition: refurbished (used), Year of construction: 1999, Functionality: fully functional, overall weight: 1,300 kg, filling opening length: 1,300 mm, filling opening width: 1,400 mm, Technical specifications: Funnel opening: length x width 1300 x 1400 mm Cutter opening: length x width 700 x 760 mm Number of shafts: 4 of which: 2 cutting shafts Number of cutting discs: 37 Number of clearing discs: 37 Shaft speed: 25 rpm Drive power: 2 x 11 kW Djb Ejwf H Hbjna Nrjkl

Condition: new, Year of construction: 2025, Weima chipper / shredder WL 8 The WL 8 single-shaft shredder is a proven classic for shredding all types of wood waste. It is used, for example, thousands of times in wood-processing plants all over the world. The high quantity of these highly demanded shredders guarantees a proven and reliable technology at the best price-performance ratio. The machines are characterized by their very robust design, which ensures an extremely long service life (even outdoors). Intuitive operation thanks to Siemens PLC control with touch display. To ensure that the electronics are optimally matched to the machine, we design, build and wire our control cabinets ourselves. We only use high-quality components - for example from Siemens or Rittal. Intuitive touch interfaces guarantee quick adjustments. Functions such as setting the slider clock or stop ensure high throughput. The built-in overload protection also prevents defects in the machine. No material bridges due to free-cutting hopper design Dsb Ena Nepdqzxsrskl The hopper fulfills several tasks at once. First, the material to be shredded is fed through it - manually, mechanically, or by conveyor belt. The generous opening makes it easy to fill even very large parts. However, its special design, which is rounded at the front and thus effectively prevents material bridges, is decisive for shredding. Even with bulky parts, the shredder cuts itself free. If required, both hopper extensions and lids with gas pressure springs are available. Durable rotor bearings thanks to offset design A rotor bearing must be particularly robustly built due to the extreme stresses it is subjected to during shredding operation. To prevent dust or foreign matter from getting inside it, we have set it apart from the machine frame. This also makes it very maintenance-friendly and easy to access. Rotor diameter (mm): 260 Rotor length (mm): 1000 Rotor speed (rpm): 80 - 125 Power (kW) 22 Number of knives: 54 Available knife sizes (mm): 40 x 40 Grain size (mm): Suction port (mm): 200 Feed opening (mm): 1000 x 1250 length (mm): 2045 width (mm): 1740 height (mm): 1840 Weight (approx. kg): 2200 Accessories: - 2nd row of knives - logspacer Location: Ex stock 54634 Bitburg - immediately available -

Condition: good (used), Functionality: fully functional, RE vibrating trough with double eccentric drive. Length 6,400 mm. Inside width of trough 530 mm. Deb Ena Nev Eu N Sjrskl Height of lower edge of trough 1,100 mm Stable double eccentric drive with 4.0 KW motor.

Condition: excellent (used), Year of construction: 2012, Untha RS 30 Motor 2x11KW Year of manufacture 2012 307 operating hours Feed opening 450mm x 560mm The machine has been tested by us and is ready for immediate use. It runs very smoothly, and despite its limited hours of use, the blades still look very good. Djb Enasvgfl Hj Nrskl We have specialized in the sale of woodworking machines for 25 years. Each of our machines is thoroughly tested before sale to ensure the highest quality and reliability. Customer satisfaction is our top priority. You are welcome to inspect and test the machines in advance so that you can personally convince yourself of their flawless function and quality. We can also arrange delivery upon request. For further information or questions, please feel free to contact us by phone or email.

Year of construction: 2009, Condition: excellent (used), Year - 2009 Manufacturer - Bruks Model - 803 Input Diameter- 650 mm Capacity - 90m3/h Working hours - 10,000 h (new drum) Engine - 460 kw daf Truck data Year - 2009 Condition kilometer - 30,000 KM Dkeb Enaolawbtj Nrsl Engine - 400 kw Transmission type - 8x8 (four axles)

Condition: new, Year of construction: 2023, Year of manufacture: 2023/3 Engine power: 18.5 kW Speed: 90 1/min Weight: 1.3 tons Rotor lengths: 600 mm Rotor diameter: 252 mm Rotor knives: 28 pcs Dsb Eerq Ewdsna Nrekl Funnel: 600 x 1050 mm Machine with standard equipment

Condition: excellent (used), Year of construction: 2010, Functionality: fully functional, Rotor 630 mm Motor 18,5 KW Turning blades (30 pieces) profile rotor Djbowaxave Ena Nrokl SPS control Further technical data on request

Condition: new, Year of construction: 2024, Single-shaft shredder HOKUTech special offer model H600 Compact, robust, high throughput The H600 high-performance shredder with its flexible application options can process all types of wood-based materials (hardwood, softwood, chipboard, MDF materials, plywood, veneer residues, etc.) into chips and achieves an enormous reduction in the volume of bulky materials. The hydraulically controlled pusher feeds the wood waste to be shredded into the cutting area of the rotor and is controlled automatically and load-dependent. The high-performance solid steel electric rotor has a diameter of 252 mm and operates at a rotor speed of 85-95 rpm. The concave-ground, aggressive and 4-way rotating knives / reversible cutting crowns are located in milled knife pockets on special knife carriers. This highly efficient system guarantees high throughput, low energy consumption and optimum discharge of the shredded material by reducing the cutting gap between the counter blade and the rotor. Chip size (10 - 60 mm) Technical data: - Hopper opening - Hopper capacity - Working width of the rotor - Diameter of the rotor - Drive power - Rotor speed 600 x 800 mm 0.6 m3 600 mm 252 mm Dkebsutmw He Ena Nrjl 15 kW 90 rpm Location: Comes to stock 54634 Bitburg - available by arrangement -

Condition: good (used), Year of construction: 1995, Slow-speed conveyor with moving floor Dkob Ena Nowfw Dkerjl Rotor width 600 mm 18.5 kW motor 30 mesh screen Only approx. 3,000 hours

Condition: excellent (used), Weima ZM 30 2x11KW Operating hours 1243 Feed size bottom approx. 500x450mm Funnel top approx. 1m x 1.2m Transport dimensions height 2m, width 1.6m, depth 1.6m Weight approx. 1500kg Dsbevxvupj Ena Nrekl Area of application for materials such as wood, plastic, paper, metal and rubber. It is also suitable for processing production waste and residual materials.

Condition: excellent (used), power: 18.5 kW (25.15 HP), overall weight: 1,200 kg, Single-shaft shredder with load controlled ram - driven by hydraulic. V-rotor specially developed by Weima Automatical switch-off, when empty TECHNICAL DATAS: Hopper opening .....600x800 mm Rotor diameter.....252 mm Rotor length.....600 mm Rotor speed ..... 90 rpm Drive power..... 18,5 kW Dkjb Enowf Rvmoa Nrsl Number of knives..... 14 pcs Knive size..... 40x40 mm Screen holes..... 20/15 mm Exhaust connection..... 160 mm Length of the machine..... 2045 mm Width of the machine..... 1190 mm Height of the machine ..... 1640 mm Weight..... 1200 kg

Condition: as good as new (ex-display), Year of construction: 2024, Functionality: fully functional, EXHIBITION MACHINE new Due to the special shape of the rotor, the highest efficiency is achieved with comparatively low motor power (11kw). Specially designed for: * Hardwood Dsbsb Dwk Ne Ena Nrskl * softwood * chipboard * and all products similar to wood - most modern technology-robust quality - space-saving construction - powerful with low connected load - special cutting rotor for maximum throughput - multiple usable cutting tools - tooth plate made of special steel - 2000 hours warranty on the high performance gear - exchangeable screens with different hole sizes - intelligent SPS control system with interfering material cut-off (incl. 5m cable) dimensions 1.150x1.130x1.930 mm

Condition: as good as new (ex-display), Year of construction: 2023, Functionality: fully functional, power: 11 kW (14.96 HP), Untha LR 520 wood chipper Year of manufacture 12/2023, exhibition machine 35 operating hours Djb Enaovw T Uwo Nrokl

Condition: new, Year of construction: 2025, Weima single shaft shredder type WL 6 Power 18,5 kW Our machine concept WL 6 The Weima high performance shredders with their flexible can process all kinds of wood materials (hardwood, softwood, chipboard, MDF materials Deb Ena Necbtpkerjkl softwood, chipboard, MDF materials, plywood, veneer residues etc. ) into and, in the case of bulky materials, achieve an enormous volume reduction of the material. enormous volume reduction of the material. Mode of operation: The machine is equipped with a large hopper and can be fed by a conveyor belt or by hand. fed by means of a conveyor belt or by hand. This hopper can be adapted to individual needs and guarantees a continuous and cost effective and cost effective material feed without the need for manual assistance. manual assistance. Technical specification WL 6 / 18.5 kW hopper opening: 800 x 1.000 mm hopper capacity: 0,9 m³ working width of the rotor: 800 mm diameter of the rotor: 252 mm Driving power: 18,5 kW Rotor speed: 80 -120 rpm Number of knives: 42 pieces type and size of knives: concave / 40 x 40 mm, cutting reversible crowns Sieve perforation: 10-60 mm possible (standard 15-20 mm) Painting: WEIMA standard RAL 2002 / 7016 connected load: 400 V +/- 5% / 50 Hz weight: approx. 1.600 kg Included: - Switch cabinet ( Rittal ) incl. electrical control ( Moeller / Siemens ) and star-delta start-up - Rubber oscillating elements - V - rotor ( patented ) with knife pockets fixed in the profile - gear limit switch - Contact pressure

Condition: like new (used), Year of construction: 2021, operating hours: 320 h, power: 18.5 kW (25.15 HP), Nearly new chipper with only 320 operating hours, being sold due to upgrading to a larger chipper. Rotor width 630 mm with double row of knives, for a total of 30 knives. Motor 18.5 kW Djb Enswc Iy Dea Nrskl

Condition: excellent (used), Weima WL 4 Year of manufacture 2016 Motor 18.5 kW Rotor length 600 mm Screen 15/20 Running hours 587 Djb Ensv Uzxloa Nrokl Machine is ready for immediate use! We have specialized in the sale of woodworking machines for 25 years. Each of our machines is thoroughly tested before sale to ensure the highest quality and reliability. Customer satisfaction is our top priority. You are welcome to inspect and test the machines in advance so you can personally convince yourself of their flawless function and quality. We can also arrange delivery upon request. For further information or questions, please feel free to contact us by phone or email.

Condition: like new (used), Year of construction: 2023, operating hours: 1 h, Super special price, as it was on display at our in-house exhibition. Operating hours: 2 Available immediately - subject to prior sale If gone - then gone Compact design, high reliability and an excellent price-performance ratio excellent price-performance ratio: these are the advantages of this machine, which is perfect for briquetting materials such as wood such as wood, polystyrene, foam or paper. Special feature: the screw pre-compaction, which guarantees a guarantees high briquette quality. For quick and easy installation, the C 140 is mounted on a stable base frame. mounted on a stable base frame Overall dimensions: 1900 x 1410 mm Hopper opening: 1044 x 1044 mm Hopper height: 1010 mm Hopper capacity: 1.1 m³ Drive power: 4 kW Briquette diameter (mm) 40 Throughput capacity (kg/h) 30-40 Hydraulic oil volume (l) 100 Weight (kg) 530 Equipment: Press Powerful pressing mechanism with low-wear, chrome-plated tongs Pre-compressor with end-sensitive cylinder and screwed cover Control box with PLC control Hydraulics Separate oil tank with pump motor and valve control Safety switch for oil temperature Container with agitator and gear motor Screw channel with discharge screw and gear motor gear motor Accessories: Briquette length monitoring Dkebetnz Hbj Ena Nrjl Automatic on - off Location: 54634 Bitburg

Condition: excellent (used), Weima WL4 Single-Shaft Shredder, Year 201 3 Dksb Enajwdn Ttj Nrjl New Blades (28) V-Rotor Double Row of Blades Hopper Opening with Log Spacer 600x1050mm Hopper Capacity 0.6m/3 Rotor Working Width 600mm Rotor Diameter 252mm Drive Power 18.5 kW Rotor Speed 80-120 rpm Number of Blades: 28 Type and Size of Blades: Concave / 40 x 40 mm Screen Perforation 15/20 mm Connected Load 400 V +/- 5% / 50 Hz Weight Approx. 1,300 kg 2nd Row of Blades

Condition: excellent (used), Year of construction: 2011, operating hours: 1,350 h, Gross Gaz 62 V-rotor Year of manufacture 2011 Operating hours: 1350 18.5 kW drive motor Hydraulic moving floor Sieve 15/20mm PLC control New counter blade Blade changed to sharp corner Machine is ready for use immediately!!!! Djb Enaevl Ht Aj Nrskl

Condition: good (used), Four-shaft chipper UNTHA RS30 4S Blades in very good condition, can be re-sharpened on request Drive power: 2 x 7.5 kW Operating voltage: 400 V; 50 Hz Funnel opening - Cutter opening: : 510 x 560 mm Number of cutting shafts: 4 Main shaft rotation: approx. 23 rpm / 4,600 Nm Side shaft rotation: approx. 35 rpm / 3,100 Nm Perforated sieve Ø: 30 Chopping performance with sieve hole diameter: 15-20 mm: 350-550 kg/h Djb Enaovxkd Ej Nrekl 25-30 mm: 550-850 kg/h 35-40 mm: 850-1250 kg/h without sieve over 1250 kg/h Suction nozzle 200 mm Filling funnel: 550x660 mm Overall dimensions: length x width x height: 1,300 x 900 x 1,970 mm Weight: approx. 1,300 kg