Surface Grinding Machine - Horizontal

ABA FFU 1000/75

Condition: good (used), Year of construction: 1998, control type: NC control, number of rollers: 4, roller (bottom) diameter: 540 mm, roller (top) diameter: 560 mm, side roll diameter: 420 mm, roller diameter: 440 mm, roller length: 3,100 mm, sheet thickness (max.): 60 mm, overall weight: 45,000 kg, total length: 8,700 mm, total width: 2,900 mm, total height: 3,075 mm, power: 81 kW (110.13 HP), Equipment: cone bending device, documentation/manual, 4 roll plate bender HAEUSLER - VRM-hy MACH-ID 9638 Make: HAEUSLER Type: VRM-hy Year: 1998 Smallest bending diameter 640 mm Pressing force against upper roll 5800 kN Conical bending attachment Central lubrication Equipped for change rolls 570 / 500 / 430 mm Rolling width: 3100mm Rolling thickness 3x toproll Ø:50mm Rolling thickness 5x toproll Ø:60mm Rolling thickness prebending: 40mm Top Roll Ø: 560+440mm Bottom Roll Ø: 540mm Side roll Ø: 420mm Number of rolls: 4 Rolling speed: 0-6 Adjustiment lower roll: 0 - 200mm/min. Adjustment side rolls: 0 - 500mm/min. Number of driven rolls: 2 Power: 81kW Length: 8700mm Width: 2900mm Height: 3075mm Weight: 45000kg Dcodpozbqquefx Acpsn Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2025, functionality: fully functional, operating hours: 600 h, power: 0.011 kW (0.01 HP), input voltage: 400 V, input frequency: 50 Hz, pressing force: 35 t, stroke length: 300 mm, operating speed: 180 mm/s, reverse speed: 180 mm/s, table width: 60 mm, table height: 100 mm, clearance between the columns: 1,375 mm, total length: 2,250 mm, total width: 1,820 mm, total height: 2,515 mm, overall weight: 4,900 kg, controller manufacturer: Lenze, controller model: SafanDarley E-Control, working width: 1,275 mm, bending force (max.): 35 t, back gauge: 1,000 mm, back gauge speed R-axis: 150 mm/s, back gauge travel distance R-axis: 150 mm, back gauge travel distance Z-axis: 1,000 mm, distance between stands: 1,375 mm, height adjustment type: electric, installation height: 1,000 mm, warranty duration: 12 months, control type: CNC control, number of axes: 7, actuation type: electric, Equipment: CE marking, safety light barrier, The E-Brake Premium 35t-1250 is the fastest servo-electric press brake on the market, manufactured by SafanDarley. Lenze servomotors controlled by frequency inverters from the same company enable fast and reliable operation of the system for many thousands of operating hours. The SAFANDARLEY E-Brake features a patented drive transmission method, which is implemented using reinforced belts. The roller system creates what is known as a multi-block or multi-pulley system. This principle has been known for years, but its successful implementation in SAFANDARLEY press brakes since 1995 has resulted in a press that is approximately 30% faster than hydraulic presses, quieter, more environmentally friendly, and eliminates the need for oil changes. Parameters: SAFANDARLEY servo-electric press brake, model E-Brake 35-1250 Dcjdpfjr Axxzsx Acpen - Pressing force: 350 kN (35 tons) - Stroke: 300 mm - Opening: Q = 690 mm - Accuracy of the upper beam: +/- 0.01 mm - Max. bending speed: 10 mm/s - Max. speed of the back gauge fingers: 350 mm/s - Max. reach of the back gauge fingers (third point of reference): 1000 mm - Connected power: 11 kW - Machine width: 2225 mm - Machine depth: 1820 mm - Machine height: 2550 mm - Weight: 4,300 kg - Servo-electric drive (without hydraulic system) SAFAN E-Control – numerical control system - Dual 21'' color split-screen touchscreen (The lower part of the screen enables programming, and the upper part allows viewing PDF documentation, DXF files, or a 3D visualization of the bending process) - Swivel arm - ELO Touch technology EC20 – 2D graphics program, overlay for the E-Control control system CNC axes: Y1, Y2 – CNC-controlled axes X – CNC-controlled axis deltaX – CNC-controlled axis R – CNC-controlled axis Z1, Z2 – CNC axes Safety light guard – programmable light curtain: Basic function – safety Interruption operation function – 1 cycle / 2 cycles Curtains can be disabled in safe mode WILA NSCL I HC upper adapter – hydraulic upper tool clamping system Safan OBS/3 table – lower tool mounting system, compatible with Wila/Trumpf or Amada tools, table with a width of 60 mm and a 13 mm groove Ergonomic package: cutout in the table for working in a seated position, ergonomic tables, ergonomic chair E-Bend S system – sheet thickness measurement system with automatic deflection correction The machine is in like-new condition. Inspection, testing, and presentation are possible on-site – Sosnowiec. Each unit undergoes a full technical inspection and quality testing by an authorized SafanDarley service center.

Condition: used, TECHNICAL DETAILS - center height : 100 [mm] - Distance between centers : 650 [mm] - Max. table orientation : [°] - Travel : 650 [mm] - Speed : 100 - 3500 [mm/min] GRINDING WHEEL HOLDER HEADSTOCK - Orientation : [°] - T1 grinding wheel dimensions : 350 x 32 x 127 [mm] Dodpfx Aceyn R I Hepjcn - Power : 3 [kW] - Speed : 1600 - 2200 [rpm] - Peripheral speed : [m/s] PART-HOLDER HEADSTOCK - Spindle speeds : - 1200 [rpm] - Power : 0.5 [kW] - Type of cone : CM4 - Max. part weight : 20 [kg] - Orientation : 0 - 90 [°] POWER SUPPLY - Supply voltage : 400 [V] - Power : 8 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 00 x 00 [mm] - Machine height : 1650 [mm] - Machine weight : 1900 [kg] MACHINE HOURS - Number of hours under power : 01 [h] EQUIPMENT - Sony LG20-2 display - Automatic contact detection : SENSITRON 6 - 1 tailstock with fine adjustment - 1 internal grinding spindle - Fixed dressing device - Coolant tank - 1 three-key steady rest

Year of construction: 2016, condition: ready for operation (used), The Coiltech Decoiler Straightener Feeder System is a compact press feeding system. Belt width: 600mm, material thickness: up to 6.5mm, straightening rollers: 7x115mm, decoiler tonnage: 6000kg, diameter (inner), min-max: 470-520mm. Connected load: 7.5kW, with documentation. Dcedpji El Ucjfx Acpen

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, Pressure: 225 t Dcsdsyz S Ngjpfx Acpsn Bending length: 4050 mm Control: DA 69 TW Oil capacity: 400 l Total power requirement: 17 kW Machine weight approx.: 18,100 kg Dimensions: 5700 x 2610 x 3300 mm

Condition: used, TECHNICAL DETAILS - Plate - External diameter : 750 [mm] Djdpfoxb Em Nex Acpecn - Internal diameter : 150 - Main motor rotation speed : 4 [kW] - Supply voltage : 380 [V] - Total installed power : 3.6 [kW] WEIGHT & DIMENSIONS - Machine floor space : 1100 x 1700 [mm] - Machine height : 2000 [mm] - Machine weight : 1100 [kg] - Number of hours : 5160 [h]

Condition: used, 72″ x .187″ x 50,000Lb Paxson Loop Slitting Line Make: Paxson Dcodpfsihf Ufsx Acpsn Material Width: 12″ – 72″ (Uncoiler 60″) Material Width: .010″ – .187″ Coil Weight: 50,000Lb Coil ID: 20″ – 24″ Coil OD: 72″ Speed: 500 /1000 fpm Direction: Right to Left Material Strength: 40,000 yield / 50,000 psi shear Material: CR, HR, Galvanized Entry Transfer Cart Entry Coil Car Mandrel Uncoiler Powered Hold-Down Roll Powered Expansion Sliding Base Hydraulic Peeling Table Driven Pinch Rolls

Condition: refurbished (used), functionality: fully functional, year of last overhaul: 2026, ⚙️ Studer S20 Favorit – Universal cylindrical grinding machine 400 x 100 mm ⚙️ 🔝 Latest version with PLC and updated automation 🔹 High-precision cylindrical grinding machine for external and internal grinding. 📐 Main features: ↔️ Distance between centers: 400 mm 📏 Center height: 100 mm 🇪🇺 CE marking 🔧 Completely rebuilt (full retrofit) to offer performance and precision comparable to that of a new machine. 🛠️ Equipped with renewed components and carefully adjusted to ensure maximum reliability and precision. 🧰 Wide range of accessories available. 📅 Delivery time: available for immediate delivery! 📸 Photographs of our finished machine. Dcjdszcytbopfx Acpsn 🏷️ Project reference: OP26-003 For more technical information, pricing, or details about the machine, please do not hesitate to contact us.

Condition: good (used), Year of construction: 2004, functionality: fully functional, travel distance X-axis: 3,750 mm, travel distance Y-axis: 1,870 mm, travel distance Z-axis: 700 mm, total length: 9,000 mm, table length: 4,000 mm, table width: 1,650 mm, total width: 3,500 mm, spindle speed (max.): 6,000 rpm, total height: 3,500 mm, distance between stands: 2,300 mm, rotational speed (max.): 6,000 rpm, overall weight: 30,000 kg, Equipment: rotational speed infinitely variable, X-axis: 3.750 mm Y-axis: 1.870 mm Z-axis: 700 mm Dcjdpfx Acjyac T Espen CNC Controller: Heidenhain iTNC 530 Spindle nose: ISO 50 Spindle speed: 6.000 Rpm Toolchanger: 30 pockets Table size: 4.000 x 1.650 mm Distance between columns: 2.100 mm Featured with: - Vertical milling head attachement - Touch probe - Cooling throught spindle - Double chip conveyor - Cooling unit - Machine manuals Country of origin: Taiwan Machine LxWxH: 9000 x 3500 x 4000 mm +/- Machine weight: 30.000 kg

Condition: excellent (used), Year of construction: 1986, grinding length 800 mm Dcodpfx Acount Iuepjn grinding width 375 mm workpiece height 375 mm magnetic clamping plate, electical 900 x 300 mm spindle turning speed range 1500 - 3000 U/min table surface area 1550 x 370 mm table longitudinal travel 100 - 1000 mm max. workpiece weight 350 kg dimensions of grinding wheel 300 x 50 mm total power requirement 9 kW weight of the machine ca. 4,6 t dimensions of the machine ca. 4,0 x 2,3 x 2,6 m