Panel press High frequency generator

ACMA T76

Condition: good (used), Year of construction: 2007, Technical characteristics : - Max machinable length 3200 mm - Minimum machinable length 200 mm - Maximum width 200 mm - Minimum width 40 mm - Maximum workpiece height 130 mm - Depth with max Ø to tenon 320 mm: 105 mm - Tenoning carriage speed min / max 0/100 m / min - Min / max profiling speed: 3/15 m / min Tenoning: 1- end cut saw 5.5 hp (4 kW) Saw Ø 400 mm 2- tenoning router Counter bearing 50 x 620 mm 15 hp (11.3 kW) Max tool Ø 320 mm Axle stroke 575 mm Automatic splinter guard 3- tenoning router Counter bearing 50 x 620 mm 15 hp (11.3 kW) Max tool Ø 320 mm Axle stroke 575 mm Automatic splinter guard Vertical positioning with continuous axis 4- Digital angular adjustment clamp Profiling: 5-: router to be profiled on the right Shaft 50 x 320 mm 10 hp (7.5 kW) Ø tools 130/240 mm Axle stroke 280 mm Time-delayed anti-shattering intervention during calibration Double direction of rotation Vertical and horizontal positioning with continuous axis 6-: router to be profiled on the right Shaft 50 x 320 mm 10 hp (7.5 kW) Ø tool 130/240 mm Axle stroke 280 mm Vertical and horizontal positioning with continuous axis 7-: router to be profiled on the right Shaft 50 x 320 mm 10 hp (7.5 kW) Ø tool 130/240 mm Vertical and horizontal positioning with continuous axis 8-: close-out recovery group Vertical and horizontal positioning with continuous axis Device for extracting the shutter 9-: lower horizontal shaft for groove Vertical and horizontal positioning with continuous axis 88.5 hp (66.4kW) Djdpfx Aot R T Hcefnocc 10-: digital guide 11-: Return of parts to the operator NO TOOLS AVAILABLE OBTAIN ADDITIONAL PHOTOS NOTE: SUBJECT TO CHANGES IN TECHNICAL DATA

Condition: used, Technical data: Max planing width: 230 mm Max planing height: 120 mm Spindle diameter: 40 mm Number of spindles: 5 Spindle sequence: down 5.5 kW right + left 11 kW up 7.5 kW universal 5.5 kW Each spindle on a separate motor Number of upper steel pulling rollers: 5 Number of upper rubber pulling rollers: 3 1 rubber roller in the table top Extraction port diameter: 150 mm Smooth feed adjustment: 4-24 m/min Cardan feed Table lubrication pump Pressure: 6 atm. Electric lifting of the body Power: 400V Overall dimensions: Length: 4240mm Dodpfxjmiik To Afnscc Width: 1550mm Height: 1560mm

Condition: used, Painting system consisting of: Pos.1 Venjakob belt conveyor - Manufacturer: Venjakob - Working width: 1,300 mm - Length: 3,000 mm - Feed adjustable via handwheel ~ 2.5 – 7.5 m/min - Volt, Hz: 400 / 50 - Colour RAL 7035 Pos.2 Cefla dust extraction machine - Manufacturer: Sorbini - Type: VS/32-E - Year of manufacture: 1998 - Working width: 1,300 mm - Working height: 900 mm + - 20 mm - Operating side: right Dcodpfx Afov I Akvonjc - Roller conveyor - Air blowing channel, above 2 pcs. - Air blowing channel, below 1 pc. - Dust remover brush - With ionisation bar from above - With ionisation bar from below - With own drive - With own control - Length ~ 910 mm - Width ~ 2,600 mm - Weight 1,260 kg - Extraction nozzle D 180 + 120 mm - Total connection 7.6 kW - Volt, Hz 400/ 50 Pos.3 Venjakob VEN SRAY Perfect automatic spraying machine - Manufacturer Venjakob - Type. VEN SPRAY PERFECT - Year of construction 2013 - Working width 1,300 mm - Working height 940 + - 20 mm - Operating side left - IR preheating, number of radiators 2 pcs. - Duo-design spray gun drive - Dry suction - Diameter of suction nozzle 600 mm - Exhaust air capacity 10,000 m³/h - Belt transport system - feed speed infinitely variable ~ 4-10 m/min - conveyor belt cleaning system - paint recovery via V-belt system - gun control, EPS-CNC CNC 7000 - colour management system for number of pumps 3+1 pcs. - number of installed airless spray guns 4 pcs. - Quick-change system for spray guns - Remote maintenance system - Dust cover on the outlet side of the machine - Exhaust air recirculation system - Exhaust air control of the suction ventilator - Machine suitable for water-based paints - Machine suitable for solvent-based paints - Length 5,509 mm - Width 4,500 mm + 2,400 mm - Height 3,380 mm + 510 mm - Total connection ~ 20 - 26 kW - Volt, Hz 400/50 - Colour RAL 7035 - Kremlin AVX AirMix spray guns - Small parts container - gun support arm system for quick removal of 4 AirMix spray guns from the spray booth, including quick couplings for pneumatics and material hoses. Pos.4 Venjakob belt conveyor - manufactured by Venjakob - working width 1,300 mm - length 2,000 mm - feed adjustable via handwheel ~ 2.5 – 7.5 m/min - Volt, Hz 400 / 50 - Colour RAL 7035 Pos.5 Cefla high-level dryer - Manufacturer Cefla - Type VN 2000/5500/190.5/30 - Year of construction 2003 - Working width 1,300 mm - Number of pallets 30 pcs. - Pallet length 5,600 mm - Usable pallet length 5,300 mm - Load capacity per pallet 300 kg - Max. part height ~ 110 mm - Clearance between pallets 120 mm - Dimension: centre of pallet to centre of pallet 3,658 mm - Max. part length ~ 5,200 mm - Number of controllable temperature zones 2 pcs. - Supply air flow rate 6,000 m³/h - Exhaust air flow rate 6,000 m³/h - Heat output max. 175 kW - Max. drying temperature ~ 55 - 60 degrees - With heat exchanger, hot water - Without hot water control valves - U-shaped flow direction - Inlet side on the right - Feed speed via frequency converter control ~ 2-20 m/min - Suitable for water-based paints - Suitable for solvent-based paints - Length 7,820 mm mm - Width 6,130 mm - Height 3,905 mm - Total connection ~ 23 kW - Volt, Hz 400 / 50 - Voltage fluctuations max. +/- 5 % - Without control valves and water pumps Pos.6 Cefla belt conveyor - Manufacturer Cefla - working width 1.300 mm - length 2.000 mm - feed adjustable via handwheel ~ 2.5 – 7.5 m/min - volts, Hz 400 / 50 - colour RAL 7035

Condition: good (used), Code: 0427 Brand: ILMETECH Model: I 12 - 065 Automatic knife grinding machine for planer knives, knife blades and rectilinear tools - CE Standard Technical data: Suitable for grinding of HSS steel as well as carbide tools used in the woodworking, paper, leather, plastics, metal and food sectors Max working length mm 650 Tilting grinding motor unit Grinding wheel motor power kW 1,15 Grinding wheel external diameter mm 125 Dodou H Apyspfx Afnocc Grinding wheel feed per stroke mm 0-0,05 Two-speed carriage feed mt/min 6/12 Coolant pump capacity lt/min 0-30 Overall dimensions mm 1450 x 550 x 1300 h Weight kg 186

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, Used BIESSE Rover A - Nesting CNC - Year of manufacture: 2016 - Available from November 2025 Dcodpoxhcndsfx Afnsc - Additional photos and video available

Condition: new, Cefla painting system Dcjdjwhbrwspfx Afnsc

Condition: reconditioned (used), Year of construction: 2007, Available Immediately: Semi-Automatic Line for Finger-Jointing Wooden Elements Up to 6 Meters in Length The line has undergone a complete overhaul. The finger jointer is equipped with a table featuring a conveyor belt and an additional rotary table. This setup simplifies and speeds up machine operation, thereby increasing efficiency. A new glue nozzle for automatic glue application and a new saw-chipper are included. The press has a fixed jointing length of 6 meters. Finger Jointer Technical Specifications: • Spindle diameter: 50 x 210 mm • Spindle speed: 5,500 rpm • Motor: 15 kW • Tool dimensions: 250 x 150 mm • Special chipper: 300 x 8 mm • Motor: 6 kW / 3,000 rpm • Infinitely variable feed table • Working width x height: 600 x 30 x 150 mm Hydraulic Press: Dcedpfx Afotyy Exjnsc • Working length: 6 meters • Lamella width up to 160 mm, thickness up to 80 mm, gluing length per cycle: 6,000 mm • Number of pneumatic pistons: 4 (2 from above, 2 from below) • Air pressure: 5–8 bar • Air consumption: 300 l/cycle • Saw blade diameter: 300 mm • Spindle diameter: 30 mm • Motor power: 1.5 kW • Saw movement: pneumatic Dimensions (L x W x H): 7,700 x 1,160 x 1,500 mm Weight: 1,500 kg Optional services for an additional fee: installation, commissioning, and training on machine operation.

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, Korimat KA-240 Autoclave Pressure Cooker Djdpfev Tyu Aox Afnjcc 230V Gas-operated V2A 21kW 240L Built in 2009 2.5 bar The system is fully functional ready for immediate use. Accessories: 3-part basket Further information available upon request! Cash or prepayment! Sale to businesses only. No guarantee or warranty.

Condition: good (used), functionality: fully functional, Diameter range: 52 mm - 99 mm Height range: Dedpowxtybofx Afnjcc Production capacity: up to 500 units per minute Number of heads: 6 Tooling available for approx.: 73 mm (others on request)

Condition: used, Model hollow screw steel Diameter 280 mm Housing / cover stainless steel Length 8.65 m Manufacturer: TMG Type: SS06 Dcodpfx Aferpaqpsnoc year of construction 2001