Machining center

BIESSE Rover A FT 2243

Condition: like new (used), Year of construction: 2017, operating hours: 2,080 h, functionality: fully functional, machine/vehicle number: 10000144427, travel distance X-axis: 5,580 mm, travel distance Y-axis: 2,917 mm, travel distance Z-axis: 378 mm, rapid traverse X-axis: 85 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 20 m/min, nominal power (apparent): 13 kVA, controller manufacturer: BIESSE, controller model: BH660, workpiece length (max.): 4,300 mm, workpiece width (max.): 2,205 mm, workpiece height (max.): 170 mm, table width: 22,005 mm, table length: 4,300 mm, rotational speed (max.): 24,000 rpm, overall weight: 3,840 kg, spindle speed (max.): 24,000 rpm, spindle motor power: 13,200 W, number of spindles: 10, number of slots in tool magazine: 8, input voltage: 400 V, type of input current: three-phase, Biesse Rover A 2243 FT CNC Machining Center with Automatic Loading/Unloading System.This 2017 machine features a large flat grid table of $4,300$ mm x $2,205$ mm, divided into a 12-segment Multizone vacuum system for independent work-holding. The machine is equipped with a powerful $13.2$ kW HSK-63F electrospindle with a maximum speed of $24,000$ rpm. Tool changes are handled by an 8-position turret magazine. A BH10L drilling unit with ten independent vertical spindles is also included.A key feature is the fully automatic material handling system, including a scissor table for pallet loading (max weight 6 tons), an alignment and labeling machine, and a servo-controlled sweeping arm for automated unloading onto the $4,800$ mm discharge conveyor belt. The machine is controlled by a BH660 CNC numerical control and includes the bSolid programming software with the bNest module for nesting operations. Fgsdpfx Agsxy S Dfscek

Condition: used, Year of construction: 2009, operating hours: 6,000 h, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, controller model: Heidenhain iTNC530, spindle speed (max.): 36,000 rpm, GF Mirkon XSM600U X: 800 Y: 600 Z: 500 A: +30/-100 degrees C: 360 degrees continuous HSK50 spindle: max. 36,000 rpm, 25 kW HR410 handwheel 60-station tool changer Rotary table including 3R clamping system Chip conveyor Coolant system with 20 bar internal coolant supply Blum laser tool measurement M&H 3D probe Fgsdpewa R A Nefx Agcsk Pallet automation with 21 pallets - the pallets are not included in the scope of delivery This machine is offered on a customer order basis!

Condition: used, Year of construction: 2017, Numerical Control with B-Solid Software - 3D CAD-CAM program to design, simulate, and manage processes of machining of Biesse machining centers and drilling machines Fedpjt Ul Dnsfx Agcegk BNest Software - Software module dedicated to processing in Nesting mode that allows you to create projects containing the list of articles with the quantities to be produced and the list of plates to be used with the aim of minimize the material used and processing times Working field in X axis mm 4300 Working range in Y axis mm 2200 N ° 2 work fields Nesting work plan Automatic loading system with side lift table Panel detachment system with 2 suction cups N° 1 vertical 3-axis electrospindle, Kw 13.2, with automatic tool change, Hsk cone type Automatic tool change system with 16 positions - positioned on the rear of the machine BH 10 boring head with 10 spindles arranged as follows: - N ° 5 vertical in X axis - N° 5 verticals in Y axis Automatic unloading system with motorized belt Worktop cleaning system Printing and application system of adhesive labels with labeling machine, 22" monitor, keyboard and mouse with dedicated PC Protection and safety system with perimeter grids Safety system with bumper Automatic lubrication system Air conditioning system for cooling and cleaning the machine control N° 2 vacuum pumps 250 m3/h Installed power Kw 31

Condition: ready for operation (used), Technical characteristics En cours de vérification Nesting machining center with full table X axis travel: 4300 mm Y axis travel: 2205 mm Z axis travel: 326 mm Electrospindle 3-axis spindle, 12 kW HSK F63 chuck Revolver-type tool magazine, 8 tool holders BH17L drilling unit Vertical and horizontal drilling unit + grooving unit 10 vertical drill bits, 32 mm pitch (7 X-oriented and 3 Y-oriented) 6 horizontal drill bits, 32 mm pitch (2 X-oriented and 1 Y-oriented) 1 grooving blade, diameter 120 mm, for grooving in X (useful cut 25 mm) Independent Z drilling unit to optimize machining times Fodetqi Uyjpfx Agcogk 9-area vacuum table with MDF martyr panel Rear, front and side (left) reference stops 2 vacuum pumps 300 m3/h Controls : On Windows PC BiesseWorks Advanced software machine version Programming and optimization of drilling, cutting, milling, toolpaths and tool changes Customized parametric macros Network and/or USB file imports 3D part and toolpath simulator Parametric programming of the workpiece Martyr table surface program Collision management Tooling set and parametric cones supplied 2 BiesseWorks office version software keys supplied Power and Motors Voltage: 400 V Pluging: Three-phased Power: 33,4 Kw Overall dimensions Lenght: 8400 mm Width: 5800 mm Height: 2445 mm Weight: 3840 Kg

Condition: like new (used), Year of construction: 2011, DMC USK 1350 M3 wide-belt sander - Italian production - transverse aggregate so-called sergeant - year of production 2011 - electric and pneumatic ionizer TECHNICAL PARAMETERS: grinding width 1350 mm grinding height 4-170 mm minimum workpiece length 365 mm vacum table 1 aggregate: transverse tape, the so-called sergeant engine power 12 kW 2nd aggregate: rubber shaft hardness of 95 shore diameter 240 mm engine power 18.5 kW 3rd aggregate: Fgodpfxsgr Er Ss Agcek rubber shaft hardness of 55 shore shaft diameter 300 mm engine power 15 kW 4 aggregate: pneumatic shoe engine power 15 kW 5 aggregate - cleaning brush - 2.2 kW 6 aggregate - blowing blowing on the tape pneumatic oscillation feed speed 2.5 - 18 m / min pneumatic straps tension electric height adjustment spigots diameter 3 x 200 mm, 8 x 80 mm, 2 x 160 mm, 1 x 150 mm transport dimensions (length / width / height) 370/250/250 cm weight 5000 kg

Condition: used, Year of construction: 2015, Numerical Control NC 1000 Software Biesse Works Working field in X axis 4300 mm Working field in Y axis 2205 mm FT nesting full plane worktable Automatic loading system with side lifting table Automatic labeling machine for barcode printing Automatic printing and application system of adhesive labels N ° 1 vertical electrospindle, with automatic tool change, HSK F63 Blade unit integrated in the drilling head on X axis - diam. 120 mm Blade unit integrated in the drilling head on Y axis - diam. 120 mm Automatic tool change system with 8 positions - positioned on the machine operating head Automatic tool change system with 21 positions - positioned on the rear of the machine with chain BH 20 boring head with independent spindles arranged as follows: - N ° 8 vertical in X axis - N ° 8 vertical in Y axis - N ° 4 horizontal in X axis - N ° 4 horizontal in Y axis Automatic unloading system with motorized belt Front protection and safety system with carpets and perimeter nets Automatic lubrication system Air conditioning system for the electrical panel Vacuum pumps Fgedpewt Snyofx Agcok

Condition: used, machine/vehicle number: 007829, Position 1: Front-Loading Panel Saws SCHELLING-FH 4 430/220-P Position 2: Automated Warehouse SCHELLING-FH 4 430/220-P Fodpjwu Ahgefx Agcjgk

Year of construction: 1984, condition: ready for operation (used), Rafamet UBB 112/2 Wheel Tread Diameter Minimum 700 mm Wheel Tread Diameter Maximum 1120 mm Clamping length 540 - 1050 mm Wheelset Axle Length Minimum 1640 mm Wheelset Axle Length Maximum 2800 mm Maximum Tire Width 150 mm Maximum Wheelset Weight 4000 kg Saddle Set Up Motion Speed 2000 mm/min Saddle Feed Maximum 2000 mm/min Fgjdpfehvml Ijx Agcek Main Drive Motor Power 80 kW Weight aprox 40000 kg

Condition: used, machine/vehicle number: 008016, X axis working area: 3300 mm Fgjdpfx Agsw Idhmocok Y axis working area: 1550 mm Working Table: Pod and Rail Main Electrospindle power: 10 KW Number of controlled axes: 5 axes Total number of drilling spindles: 35 Total number of tool changer positions: 14

Condition: ready for operation (used), Year of construction: 2002, Extruders and oil screw presses for soybean processing, obtaining oil and soybean cake. There are two extruders and two presses. One extruder and one press work in tandem and form a pressing line. Fgsdpetxinaofx Agcjk The motor power of the press is 22 kW and the power of the extruder is 55 kW. the capacity of one line is 500-800kg/h The price refers to one line (exstruder+press)