Separator

Alfa Laval

Condition: new, Year of construction: 2022, functionality: fully functional, Item: A-Aalborg-Micro AALBORG MICRO The Aalborg Micro is a compact exhaust gas heat exchanger/steam generator, designed for waste heat recovery from gas/MDO/HFO engines and gas turbines. As a heat exchanger, the Aalborg Micro offers a wide range of opportunities, due to the fact that hot water, TEG and TFO can all be used as media. Furthermore the Aalborg Micro can be used as a steam generator. Dodpfx Adoqy Nv Rerjkp A cylindrical unit in the center with an integrated regulation damper allows up to 80% of the exhaust gas to bypass the heating surface. The heating surface can be cleaned easily via optional soot blower rings using compressed air/steam/water, and/or by a pyrolysis process in dry-run mode

Condition: excellent (used), functionality: fully functional, tank capacity: 68,000 l, usable tank capacity: 65,000 l, total height: 9,865 mm, inner diameter: 3,400 mm, outer diameter: 3,800 mm, overall weight: 4,200 kg, negative pressure: 0.02 Pa, overpressure (max.): 2 bar, 20 x 68 m³ ZKG Tank / Beer Pressure Tank / Fermentation and Storage Tank Technical Data / Dimensions Available units: 20 Total volume: approx. 58,000 liters Tank type: Pressure tank Condition: Used Suitable for food: Yes Design: Suspended Internal diameter: approx. 3,400 mm External diameter: approx. 3,800 mm Cylindrical height: approx. 6,000 mm Total height: approx. 9,865 mm Weight (empty): approx. 4,500 kg Specific weight of medium: 1.0 t/m³ Operating pressure: Overpressure Operating pressure: 2 bar Test pressure: 2.86 bar Wall thickness, cone: approx. 4–5 mm Wall thickness, top head: approx. 6 mm Wall thickness, shell/cylinder: approx. 3.5–4 mm Operating temperature: -10°C / +50°C Material: Inner shell material: V2A (1.4301) Internal surface: Ground and pickled Heating / Cooling System Cooling medium: Glycol Operating pressure: 2.0 bar Operating temperature: -3°C Heating / cooling system material: V2A (1.4301) 2 x shell cooling zones (approx. 11 m² each) with approx. 100 liters capacity each 1 x cone cooling zone (approx. 4 m²) with approx. 70 liters capacity Insulation Insulation thickness: approx. 150 mm Insulating material: PU foam / mineral wool Cone cladding: Stainless steel (1.4301) Shell cladding: Aluminum trapezoidal sheeting Equipment Mounting type: Hanging lugs Number: 4 Attachment: Fixed Top base type: Basket dome Bottom base type: Cone Top head: 1 x manway DN 500 with insulation hood 1 x roof edge railing 1 x valve dome with the following fittings/connections: Dkodjyhzq Aspfx Adrep 1 x vacuum valve (DN 40) 1 x safety valve (DN 40) 1 x cleaning fitting with spray head DN 32 (removable) Shell: 2 x connections for temperature measurement with insulation box 1 x cable protection tube DN 50 1 x dome drain pipe DN 15 1 x cleaning line DN 50/40 3 x cooling supply (DN 25 / R1") 3 x cooling return (DN 25 / R1") Bottom/cone: 1 x sampling valve DN 10 1 x swiveling cone NW 450 1 x cone with threaded connection DN 65 terminating Documentation: Drawing Inspection book TÜV certificate The tanks originate from various years of manufacture (1990–2004) and may differ slightly in equipment and design.

Condition: used, Year of construction: 1995, A flash pasteurisation plant with a plate heat exchanger for heating 200 hl/h of beverage from 3 °C to 74 °C. Additional title: inline pasteurisation plant Capacity: 20000 l/h Material: stainless steel Features: Plate heat exchanger; control cabinet with digital control panel Dkedjzizt Iepfx Adrsp

Condition: good (used), Year of construction: 2023, Alfa Laval LKH-UP70 Centrifugal pump Serial: 298034 2023, Stainless centrifugal pump, 22Kw motor, 3Ph Dksdsu N Hz Sepfx Adrjp

Condition: good (used), Alfa Laval LKH70 Centrifugal pump Serial: 83321 Stainless centrifugal pump, 30Kw motor, 3Ph Dsdpeu N Hybjfx Adrekp

Condition: good (used), Alfa Laval LKH70 Centrifugal pump Dkjdpfx Aeu N Hv Njdrop Serial: 39398 Stainless centrifugal pump, 30Kw motor, 3Ph

Condition: new, Unused Alfa Laval model AQ4T-BFG approximately 15sqmt heat transfer area 316L stainless steel plate heat exchanger. Unit rated 12 bar design pressure at 150 deg.c. Dodpfx Adezimvusrjkp

Condition: good (used), 5 units in good condition Dkjdpfxeykk Ede Adrop Were installed on a CIP device

Condition: good (used), Complete Butter oil – AMF production line This line makes Pure Dairy Fatt from melted butter or cream by separating and evaporation. Capacity output Butteroil up to 2.000 to 4.000ltr/h Input: melted butter (72-84% fat) or concentrated cream or fat stream which already had phase inversion (45/72%). Output: Pure fat > 99.8% Fatt. A Flexible line with manual controls integrated CIP system Process and equipment description: Heater Plate heater exchanger for heating the mix to 80/90°C Dsdpfszki Amox Adrjkp Complete with pumps, control valves, piping, sensors. 2 Buffer tanks Volume: approx. 8.000ltr, with agitator, stairs and frame, CIP and product valves. Feed pump make Fristam to the separators. 2 Separators: Separator 1: Concentrator Alfa-Laval model: BRPX413-XGD-14c. Concentrating up to ± 95% fat. Separator 2: Finisher Alfa-Laval model: BRPX413-XGD-14c, Concentrating up to ± 99.4% fat For each separator: The fat (light phase) is pumped out to the next stage and the water/protein (heavy phase) are separated out and ejected to a balance tank and pumped of by a separate pump. The separators have their own control panel, and a frequency converter (Danfoss VLT) on the main motor, and are mechanically complete with the inlet and counter pressure valves, water valves (for solids ejection). Evaporator Flash vacuum dryer Complete with: - Vacuum tank. - Vacuum pump. - Product pump. - Level control by float. - Vacuum controller. - Vacuum cooler - Filter on outlet. - Piping and frame. - Controls in central cabinet. - Recirculation tank with agitator placed directly next to the evaporator. - Sight glass with light to check the clearness of the final product, Concentration up to 99.8% Fatt. This is the last stage of concentrating by evaporating the last water through a flush effect where butter oil is heated under pressure and cooled and exploded in a vacuum vessel. Nitrogen injection system N2 Injection system to prevent contact with oxygen in buffer tanks. N2 injection point and its flow meter and control valve Bag filter (cloth) Sight glass with light. Serum separator Next to this there is a separator for the Sirom (heavy phase) to skim/recuperate the remaining fat in the serum and return this into the process. Buffer tank, heater/cooler and pump system are included. CIP system There is a CIP system (semi-automatic) to dose the cleaning detergent from a drum direct into the process. Including: 3 Dosing pumps, a stainless steel storage box for the Drums, injection system, pump, balance tank and controls. Ideal for concentrating a rest stream with fatt in a factory or making Butteroil from butter. Still installed in a Major Butter oil producer factory in The Netherlands.

Condition: used, Year of construction: 2019, Overview  This centrifuge was manufactured in 2019 by Alfa Laval. The CLARABREW 2050 is designed for beer processing in beverage production. The machine is still installed and can be visited in production on request. It is available immediately. Technical data  Dsdpfx Adjyuc Ulorekp - Capacity: 80 HL/h – 150 HL/h - Application: Beer - Operating hours: 1,800 h

Condition: good (used), Year of construction: 1997, Diaphragm pump, compressed air diaphragm pump, chemical pump, compressed air-operated double diaphragm pump -Manufacturer: Alfa Laval, air-operated double diaphragm pump -Type: DL25-AA-EET-Q Dedpfx Adsvay Uiorekp -Flow rate: l/min -Discharge pressure: bar -Total dimensions: 240/230/H300 mm -Weight: 8.7 kg