High-pressure vise

Allmatic 160

Condition: used, thickness of jaw 160 mm max. clamping width 302 mm weight ca. 60 kg Nsdpfxoypwf Is Akqocr length in total 770 mm Allmatic 160 hydraulic vice with adjustable clamping pressure Span S1/mm: 0-152 Span S2/mm (can be changed with locking pin): 147-302 Clamping force levels: 4 Max. clamping force in kN: 60 Design: Mechanical min. Clamping width/mm: 0 Workpiece: Pre-machined part Jaw width/mm: 160 Max. clamping width/mm: 302 Max. clamping width: 302mm - incl. 2x clamping claws - Without vice spanner

Condition: excellent (used), Year of construction: 1993, spindle bore: 118 mm, turning diameter over bed slide: 635 mm, turning diameter over top slide: 390 mm, turning length: 2,000 mm, total length: 4,170 mm, total width: 1,960 mm, total height: 1,800 mm, spindle speed (max.): 1,250 rpm, swing diameter over cross slide: 390 mm, bed width: 480 mm, overall weight: 5,200 kg, Centre lathe Colchester 600 - MAGNUM 1250 MACH-ID 9464 Make: Colchester 600 Type: MAGNUM 1250 Year: 1993 FAGOR 2 Axis Dro Feed all directions Conical turning attachment DBC Turning Length: 2000mm Swing over bed Ø: 635mm Swing over cross slide Ø:390mm Swing in the gap Ø: 900mm Gap length: 300mm Spindle bore: 118mm Spindle power: 22kW Bed width: 480mm Tailstock spindle Ø: 95Ø Stroke pinole: 190mm Spindle taper: 6Mk Speeds / ranges: 1250Rpm Nedpoyuwwhefx Akqjcr Length: 4170mm Width: 1960mm Height: 1800mm Weight: 5200kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, thickness of jaw 160 mm Ncodpfx Akjypwfujqer max. clamping width 302 mm weight ca. 60 kg length in total 770 mm Allmatic 160 hydraulic vice with adjustable clamping pressure Span S1/mm: 0-152 Span S2/mm (can be changed with locking pin): 147-302 Clamping force levels: 4 Max. clamping force in kN: 60 Design: Mechanical min. Clamping width/mm: 0 Workpiece: Pre-machined part Jaw width/mm: 160 Max. clamping width/mm: 302 Max. clamping width: 302mm - incl. 2x clamping claws - Without vice spanner

Condition: used, thickness of jaw 160 mm max. clamping width 302 mm weight ca. 60 kg length in total 770 mm Allmatic 160 hydraulic vice with adjustable clamping pressure Span S1/mm: 0-152 Nedpfoypwfhjx Akqjcr Span S2/mm (can be changed with locking pin): 147-302 Clamping force levels: 4 Max. clamping force in kN: 60 Design: Mechanical min. Clamping width/mm: 0 Workpiece: Pre-machined part Jaw width/mm: 160 Max. clamping width/mm: 302 Max. clamping width: 302mm - incl. 2x clamping claws - Without vice spanner

Condition: used, Technical details: turning diameter over bed: 320 mm turning length: 800 mm centre distance: 800 mm centre height: 150 mm spindle bore of work spindle: 30 mm range of revolution per miute: 35 - 1500 / 16 step U/min range of feed in x - axis: 0,04 - 2,4 / 30 step m/min Njdeu Ixy Djpfx Akqocr tailstock quill adjustment:: 125 mm tailstock taper MT: MK2 dimension machine xH: 1,7 x 0,8 x 1,5 m Equipment and other features: -3-jaw chuck Röhm 160mm -chuck guard -protection system WxH: 510x400mm -Multifix tool clamp (4 pieces) -Tip in tailstock -Upper slide swivels +/- 45°, maximum travel = 100mm -Cross slide travel = 300mm feed Pump for coolant device (without feed) *

Condition: used, Year of construction: 2014, functionality: fully functional, overall weight: 80 kg, jaw width: 160 mm, total length: 650 mm, total width: 160 mm, jaw height: 50 mm, clamping width: 160 mm, clamping range: 495 mm, 5 pieces Allmatic TC 125 high-pressure vices with extended clamping width up to 495mm. 1 piece Allmatic Type 125, clamping width 202mm 4 pieces HOMGE HPAQ-160 mm, clamping width up to 490mm Prices are per unit All vices are fully functional with normal signs of use. Clamping accessories for the vices are included. Inspection possible by prior appointment. Shipping available at buyer's expense. Ncedpfx Akoytc Iioqer

Condition: ready for operation (used), Allmatic-NC LC 160/200 Machine Vice Stage 1 = 15 kN Stage 2 = 30 kN Stage 3 = 45 kN Stage 4 = 60 kN Pressure sensor is not included in the scope of delivery! You are welcome to come by for an inspection. We can also organize an affordable shipping service for you! Ncedpfxoyilc Se Akqer You will receive a proper invoice. A net invoice can also be issued for foreign customers, provided a valid VAT identification number is supplied. Subject to prior sale. Visit our shop and take a look at our other offers as well. All specified company names and trademarks are the property of their respective owners and are used solely for identification and product description purposes. Deviations from technical data and errors in the item description are possible and reserved.

Condition: good (used), Year of construction: 1979, Model making milling machine, universal model milling machine, milling machine, universal milling machine, tool milling machine, drilling and milling machine, model making milling machine -Manufacturer: Zimmermann, universal milling machine type FZ 1 with extensive accessories -rotating cross table: 490 x 400 mm -Travel: X/Y/Z 320/385/430 mm -Spindle holder: SK30 -Drive: 1.1 kW Ncjdpfjnzpx Rsx Akqjr -Speed: 560 to 14000 rpm, 8-stage -Accessories: incl. see photos -Dimensions: 1000/680/H1970 mm -Weight: 477 kg

Condition: used, Technical details: jaw width: 160 mm weight of the machine approx.: 13,5 kg span width: 208 mm * Ncjdpevc Dv Ajfx Akqor

Condition: good (used), ø max. Gear 250 with 3" cutter module 5,5 hobbing length 70 cutter module 5,5 outside ø max. Acknowledged 300 mm ø spindle 85 mm ø hole table 39 mm ø table External centering Ø139,75 Nedpfogq Dgdsx Akqscr power tool motor (b) 4 Cv high 1.800 mm long 1.450 mm weight 2.450 Kg width 1.000 mm