Circular sawing machines

Altendorf F 45 ElmoDrive

Condition: used, Year of construction: 2023, machine/vehicle number: Werksüberarbeitungsnummer: WÜA23051204239033, functionality: fully functional, power: 5 kW (6.80 HP), cutting width at rip fence: 1,300 mm, main saw diameter: 550 mm, section length (max.): 3,200 mm, table length: 840 mm, F45 Elmo Drive GM010.0407 Machine height: 910 mm Eye-level control panel Double-sided tilting Max. blade diameter: 550 mm Motor: 5.0 kW (6.8 HP) Vario 2-axis scoring unit with double-sided tilt LED lighting Table extension: 840 mm Double roller carriage: 3200 mm Hfedpfx Aijymdh Do Nsi Mitre/fence stop DIGIT LD CNC parallel fence: 1300 mm Front support roller DUPLEX 1350 mm (2019)

Condition: ready for operation (used), Year of construction: 2007, travel distance X-axis: 4,600 mm, travel distance Y-axis: 1,935 mm, travel distance Z-axis: 275 mm, number of axes: 5, This 5-axis Biesse Rover C9.50 was manufactured in 2007. It features a large working area (X=4600 mm, Y=1935 mm, Z=275 mm), an automatic lubrication system, and a control unit for 5-axis interpolation. The machine includes a vacuum system, a conveyor belt for chip removal, and a liquid cooling unit. If you are looking to get high-quality CNC machining capabilities, consider the Biesse Rover C9.50 machine we have for sale. Contact us for more information. Hodpfjx D H Hcsx Ai Nsfi Worktable and clamping • 8 ATS plate holders (L = 1525 mm) and 24 slide rails • Automatic positioning of plate holders and slide rails (EPS X-Y) • Pneumatic locking system, divided into 2 working areas in X • 8 rear reference stops, stroke 115 mm • 8 stops, stroke 140 mm, positioned at 1175 mm (L = 1280 / 1525 / 1800 mm) • 8 stops, stroke 140 mm, positioned at 770 mm (L = 1280 / 1525 / 1800 mm) • 4 side stops, stroke 140 mm (2 left + 2 right), with pneumatic system • 4 removable center stops, stroke 140 mm (2 left + 2 right), with pneumatic system • Sensor for detecting lowered stops • Pneumatic system for lifting bar holders • 6 lifting bar holders for easy loading (H = 74 mm modules)Vacuum • Vacuum system for a 250 m3/h pump • 250 m3/h rotary vane vacuum pump for standard vacuum systemMachining units and configuration • Composition C3-A1: • Device for mounting chip deflectors with pneumatic or inductive sensors on a 5-axis machining unit • Flange for mounting units on a work unit with 5 interpolating axes (units usable only when the electric spindle is vertical) • Composition C3-P2: • Additional Z slide for rear work units, controlled by an independent Z axis • 16 vertical and 4 horizontal boring spindles in Y-direction • Chain tool changer with 22 positions (180 mm center distance) • Iron gripper for chip deflector with pneumatic or inductive sensor, positioned in the chain tool changer • RH chip deflector with inductive sensor for standard electric spindle or 15 kW 5-axis electric spindle (requires device for chip deflector; requires flange for mounting units when using a 5-axis electric spindle; requires C-axis when using a standard electric spindle)Systems • Automatic lubrication system • Control unit with 5 interpolating axes Additional equipment • additional refurbished 5-axe main spindel available • Conveyor belt for removing chips and scrap pieces (chip conveyor) • Liquid cooling unit for liquid-cooled systems (can cool two electric spindles, or one electric spindle plus one liquid-cooled drilling head)Note: The technical data and descriptions are taken from the original order confirmation and are for information only; they are not binding.

Condition: reconditioned (used), Year of construction: 2022, machine/vehicle number: GM010.0310, functionality: fully functional, power: 7.5 kW (10.20 HP), input frequency: 50 Hz, cutting width (max.): 1,300 mm, saw blade diameter: 550 mm, cutting length (max.): 3,300 mm, Manufacturer-refurbished Altendorf F45 with comprehensive ElmoDrive control system! TECHNICAL DETAILS Carriage Lengths and Cutting Lengths Carriage length (double roller carriage): 3,400 mm Cutting length with angle fence: 3,300 mm TIP-SERVO-DRIVE: 2,990 mm Max. blade diameter: 550 mm Saw Blade Blade diameter: 550 mm Blade projection at 90°: 204 mm Blade projection at +45°: 141 mm MACHINE DETAILS Electrical Data Motor power: 7.5 kW Voltage: 380–420 V Frequency: 50 Hz Fuse protection: 25 A Hfodpfxow I Rtce Ai Nsi Dust Extraction Connection Extraction (top): 80 mm Extraction (bottom): 120 mm Negative pressure: 1,200 Pa at main extraction port, 140 mm Air consumption: min. 1,110 m³/h at 20 m/s Air Cushion Table Compressed air consumption: 200 l/min at 1 bar (max. 400 l/min at max. 3 bar) EQUIPMENT Extendable cross-slide table widening Display DIGIT L

Condition: new, Year of construction: 2024, Working width: 600 mm Working height: 150 mm Units: 4 brush units separately adjustable Hfodpfoug Ty Hex Ai Nji 1st unit, rotor group: group of 5 oscillating rotor brushes, Ø 115, each with a 3 kW motor 2nd unit, rotor group: group of 5 oscillating rotor brushes, Ø 115, each with one 3 kW motor 3rd unit, brush: Scotch Brite Hard / diameter 220mm, Vario drive 4th unit, brush: Scotch Brite Hard / diameter 220mm, Vario drive Height adjustment: electric Height display: digital Control: touchscreen Feed speed: 4 - 12 m/min Motor power feed: 0.37 kW Machine length: Machine width: Weight:

Condition: excellent (used), C.N.C. WORKING CENTER 3 axes (X-Y-Z) Vertical position of the panel (workpiece) Movable panel (workpiece), movable working head Numerical Control POWERCONTROL + POWERTOUCH Software woodWOP Safety cabin (enclosure) of the working head No. 1 Workpieces fixing clamps (for the panels introduction in the working area Panels feeding by motorized chain/track Minimum workpieces dimensions (X - Y - Z) mm 200 x 70 x 8 Maximum workpieces dimensions (X - Y - Z) mm 3050 x 850 x 56 Total installed power (Kw) 11,5 (ca.) WORKING GROUPS: No. 1 Drilling head (power Kw 2.3) with vertical spindles - No. 13 Independent vertical boring spindles (V13 High Speed) - No. 6 Independent horizontal boring spindles (4 in X + 2 in Y) Hjdpfx Aijyywcvo Njfi No. 1 Circular Grooving Saw (on X axis) dia. (mm) 100 No. 1 Vertical electro-spindle (HKS63) power Kw 5 Automatic Tools Changing System - Tools storage plate (No. 4 folds-positions)

Condition: new, Year of construction: 2025, Roller diameter: 640 mm Outrigger overhang: 620 mm Cutting depth: 400 mm Table can be swivelled: yes, -0 to +15° Table size: 870 x 620 mm Hjdpfx Ajgtdpmsi Nefi Belt speed: 1660 m/min Motor power: 2.2 kW / 400V Motor brake: yes / automatic Dust extraction port: 2 x 120 mm Machine length: 1190 mm Machine width: 780 mm Machine height: 2063 mm Weight: 320 kg

Condition: new, Year of construction: 2024, table length 2000 mm table width 1000 mm stroke height 400 - 1010 mm Hjdpfx Aiov Htkds Nofi weight max. in kg 300 kg weight of the machine ca. 220 kg

Condition: good (used), Code: 0323 Brand: SML - ITALY Model: SILVER P 35/EL - CE Standard Electronic double mitre saw for cutting wood, frames, pvc, aluminium, plastics and various materials - CE Standard Technical data: Oleo-pneumatic head lowering Max cutting length mm 5200 Min cutting length mm 50 Hfedpstu Hy Ejfx Ai Noi Cutting height mm 100 Max cutting width mm 170 Blade diameter mm 350 F30 Motor Hp 3 each - Rpm 3000 Electronic head positioning programmer Bimanual blade lowering control Pneumatic pressures for workpiece clamping N° 2 suction ports diameter mm 60 Working pressure 7 bar Overall dimensions mm 6300 x 1000 x 1600 h Weight kg 1100

Condition: excellent (used), Year of construction: 1985, still very nice veneer saw with planing head cutting length 3050 mm with rear support and fence Hfodpfxjn An A Ts Ai Nei

Condition: excellent (used), High speed moulder infeed comprising a freestanding flat magazine in front of a high speed moulder. The infeed magazine is driven by hydraulic motors powered by an 5.5kW hydraulic unit (max 140m/min). A buffer of feedstock is alligned laying flat side by side on the chain cross feeder. The chain feeder transports parts across to the fence. The part next to the fence is detected by a light beam and the the first roller is raised to allow entry and the transport roller then pushes the workpiece under the feed rollers of the planer. The first feed roller of the planer needs to be freewheeling roller to allow operation of the EM814. Hodpfx Aijwgbxze Njfi