Format saw

ALTENDORF F45

Condition: good (used), Year of construction: 2003, Tilting panel saw Altendorf F45 with ELMO IV-plus package, featuring 2-axis scorer, 3m table, and Control-Plus control system Sliding table length: 3000mm Saw blade tilt: 0 to 45° Speeds: 3000, 4000, 5000, and 6000 rpm with digital speed display Main motor: 5.5kW with automatic motor brake Control panel at eye level with Control-Plus system 4-axis CNC control Cutting to chain dimensions and grooving on the rip fence and crosscut fence Cut width correction on rip fence and crosscut fence with tilted saw blade 600 cutting programs Calculator function with result transfer to the corresponding axis Tool management Maximum saw blade diameter: 450mm Maximum cutting height: 150mm Cutting width up to 1040mm, electrically adjustable Isdsxw Ii Sopfx Aaastp Tilt angle and height adjustment: motorized Crosscut fence rail up to approx. 3210mm, electrically adjustable, automatic coupling of the second stop flap for large cutting dimensions Rip fence can be folded down Extraction port: 120 + 80mm Sliding carriage lockable Additional mitre fence rail Includes 2 used saw blades and a scoring blade 2 riving knives 2-axis scoring unit, motorized adjustment while machine is running 2 safety guards 3 emergency stop switches Clip board on the control panel CE marking Machine with signs of wear. No cuts in the sliding table. Original paint (special colour scheme), partially repainted. Machine has 18,985 operating hours. Previously in a furniture factory, evidently regularly serviced and well maintained. Condition as shown in original photos. A video of the machine in operation can be sent on request. Dimensions approx. 3150 x 3750 x 1900mm (LxWxH). Weight approx. 1400kg. The machine can be demonstrated at our premises by appointment. We only offer machines that are ready for demonstration in our warehouse. See "more offers from this seller".

Condition: as good as new (ex-display), Year of construction: 2014, Exhibition machine Ijdskwha Eepfx Aaajtp Year of manufacture 2014 Cutting length 2600 mm Cutting width 1270 mm Cutting height at 90° = 130 mm Height adjustment electromotive saw blade diameter 400 mm swivel adjustment 0 - 45° electromotive motor 7 kW speeds 3000/4000/5000 rpm Control: display with separate keyboard swiveling control panel at eye level USB interface 300 programming memory locations electronic position display at the parallel fence cross section frame with parallelogram -manual adjustment -angle adjustment +50 -50° with digital display -length and angle measurement automatic star-delta switch Original price 25950.- Availability: short term Location: Switzerland

Condition: used, Year of construction: 1998, Used machine Isdpfx Aajxwz Insajtp Year of manufacture: 1998 Equipment and technical specifications: - Cutting length: 3400 mm - Cutting width: 1300 mm, CNC-controlled - Motor: 5.5 kW - Automatic brake - Digital display for cutting width - Digital display for tilting - Digital speed display - Digital display for mitre fence - Scoring unit: electric H+S F45 - RAPIDO scoring system - Automatic guard control - Parallelogram guard device F45 - Table extension: 800 mm - CE version - Anodised version Availability: approx. mid-April 2026 Location: Hesse

Condition: good (used), Year of construction: 2002, Sawblade tiltable 46 ° Itjdpfjxwzgwsx Aaaop Length of the rolling table 3000 mm cutting width 1000 mm Motor output 5,5 kW Cutting height 175 mm Saw blade diameter 500 mm Speed 3000/4000/5000/6000 U/min. weight of the machine ca. 1200 kg

Condition: new, Year of construction: 2024, Machine is brand new and factory packed. Loading available in our warehouse and can be quickly delivered. ADDITIONAL EQUIPMENT on machine: - automatic lubrication - side suports for long workpieces - Aditional USB key for ''Maestro CNC'' software DRILLING UNIT TECH. DATA: - 8x vertical drilling spindles - 6x horizontal drilling spindles (2+2 on ''X'' and 1+1 on ''Y'') - drilling speed 4200 min-1 - sawing unit with 125 mm diameter MOULDER TECH. DATA - Motor power: 5,5 KW - spindle speed: from 1000 - 18000 rpm OTHER DATA: - maks/min workpiece length: 3050 / 200 mm - maks/min width: 900 / 80 mm - maks/min thickness: 60 / 10 mm Iedpjip Dh Iefx Aaaetp - movement speed: 40 m/min - exhaust outlet: 1x 150 / 1x 120 / 1x 80 mm

Condition: used, Year of construction: 1993, functionality: fully functional, Panel saw Manufacturer: Altendorf Model: F 45 Year of manufacture: 1993 With 2800 mm sliding table Motor: 5.5 kW Max. blade diameter: 350 mm Scoring motor: 0.75 kW With width extension With length extension Itjdpfjxwypqjx Aaaep

Condition: used, Year of construction: 1990, Carriage length: 3800 mm Cutting width at rip fence: 600 mm Cutting width at crosscut fence: 2800 mm Cutting depth: 150 mm Scoring unit: yes Saw blade height adjustment: manual / hydraulic Saw blade tilt adjustment: manual / hydraulic Rip fence adjustment: manual Saw blade angle display: scale Cutting height display: - Itjdpfx Aaotk H Tneajp Rip fence display: scale Crosscut fence display: scale Saw blade diameter: 450 mm Speeds: 4 Motor power: 7.5 kW Motor brake: yes Extraction connection: 80 mm and 120 mm Machine length: 3870 mm Machine width: 1200 mm Weight: 1000 kg

Condition: new, capacity 90 degrees: round 255 mm capacity 90 degrees: square 240 mm 300 x 180 saw band length 2.765 x 27 x 0,9 mm mm table height 950 mm band speed 18 - 110 m/min total power requirement 1,5 kW weight of the machine ca. 0,42 t dimensions of the machine ca. 1,23 x 1,7 x 1,75 m SPECIAL PRICE!!! Double miter metal band saw, frequency converter hydraulic semi-automatic GBS 250 Super HA-I Easy • miter left 60° + right 45° • Material height sensor (automatic cut start detection) • Frame and gear made from one piece, very quiet cut and very low vibration • Hydraulic vice can be moved sideways a. • Guided, high quality industrial bearings • Solid vice + machine casting • Large machine bed • Machine base with tool compartment and chip drawer • Cut monitoring by ammeter • Cutting pressure feed regulator • Support roller (infeed side) • Ball bearing turntable Semi-automatic function: 1. Clamp material 2. Saw starts Itodpfx Ajfgyh Uoaajp 3. Rapid lowering to the start of the material or the same for series cutting cut 4. Saw band off 5. Raise the frame to just above the material 6. Open the vise

Condition: good (used), Year of construction: 1988, Panel saw Manufacturer: Altendorf Model: F45 Year of manufacture: 1988 Itodpfx Aasxvyamsaep Sliding table length: 320 cm Cutting width: 100 cm Cutting height: approx. 153 mm Max. saw blade diameter: 450 mm Power: 5.5 kW Speeds: 3 / 4 / 5 / 6,000 rpm Scoring unit: No Motor brake: No

Condition: excellent (used), Year of construction: 1997, functionality: fully functional, cutting length (max.): 3,200 mm, cutting width at rip fence: 1,300 mm, main saw diameter: 450 mm, power: 5.5 kW (7.48 HP), Equipment: motor brake, scorer, Machine available from October 2025 - TOP condition - Digital display for motorised height adjustment - Digital display for motorised tilt adjustment 90° - 45° - Sliding table length 3200 mm - Scorer with 2-axis motorised adjustment - Digital display for cutting width at parallel fence 1300 mm, motorised adjustment - Motor power 5.5 kW (7.5 HP) Vario - Digital display for stepless speed adjustment 2800 - 6000 rpm - Digital display for angle stop; crosscuts up to 3800 mm - Table extension 800 mm Isdow Rc H Hjpfx Aaaetp

Condition: new, cutting diameter 240 mm dimensions of saw-band 2730 x 27 x 0,9 mm table height 920 mm cutting speed 35 + 70 m/min 240 mm stroke back stop 230 mm cross-slide 270x230 210 Impact energy 200 Air consume per blow 200x210 130 mm 130 mm 130x160 mm total power requirement 1,2 kW weight of the machine ca. 0,26 t dimensions of the machine ca. 0,9 x 1,6 x 1,74 m • miter left 60° • Quick-release vise with quick-release device a. • Quick release lever for easy handling • Frame and gear made from one piece, very quiet cut and very low vibration • Electrical monitoring of band tension and band breakage, saw band cover. • Carbide saw band guide • Large machine bed • Machine base (disassembled) with automatic cooling The AutoCut system consists of: Hydraulic cylinder, feed control, spring assembly, limit switch Automatic saw frame lowering via the hydraulic Cylinder, continuously adjustable feed, with limit switch at the end of the cut. Rapid lowering of the saw frame from the rest position to the workpiece, then toggle to normal saw feed (e.g. for scribing). Manual operation: The hydraulic cylinder works as a brake cylinder (e.g. for notching). Through the brake cylinder the saw can be positioned in any position during the return stroke. Itjdpfx Aasd Iip Soajp

Condition: used, Year of construction: 1984, Used machine Year of manufacture: 1984 Equipment and technical specifications: - Cutting length: 2800 mm - Cutting width: 1250 mm - Saw blade swivel range: 0° - 45° - Max. saw blade diameter: 350 mm - Saw blade speeds: 3000 / 4000 / 5000 / 6000 rpm - with scoring saw unit Itedpfsxuxg Nex Aaaep - with parallelogram guard - with extraction port 80 mm - with table extension 800 mm - Motor 5.5 kW - with brake motor Weight approx. 850 kg Availability: approx. end of January 2026 Location: Hesse

Condition: excellent (used), Year of construction: 2001, Sawblade tiltable 46 ° Length of the rolling table 3000 mm cutting width 1000 mm Motor output 5,5 kW Cutting height 150 mm Saw blade diameter 450 mm Itodpfx Aasxuv Nhoaep Speed 3000/4000/5000/6000 U/min. weight of the machine ca. 1150 kg

Condition: excellent (used), Year of construction: 1980, overall weight: 32,000 kg, total width: 8,000 mm, total length: 6,000 mm, total height: 4,200 mm, sheet thickness (max.): 8 mm, Flanging and dishing machine BOLDRINI - PAO 165 / 4700 Iodpevcy Dcofx Aaastp Max. workpiece 4700 Ø Maximum sheet thickness 8 mm

Condition: excellent (used), Altendorf F45 ElmoDrive panel saw, 320 cm sliding table, Vacuum suction cups in the table, Saw aggregate tilting 0-45 degrees, Electronic, motor-driven tilt and height adjustment of saw blade, Right-side fence with motorized adjustment up to 1340 mm, Electronically adjustable 3-axis scorer, 5.5 kW vario motor, speed adjustable via frequency inverter, Maximum blade diameter 500 mm, Isdpfx Asxvc Dhjaaotp LED lighting for the scorer, Used machine, in very good condition, Few operating hours.