Laser cutting machine

Amada QUATTRO 2KW

Condition: excellent (used), Year of construction: 2008, Technical Data: Laser type: CO2 Travel: X-axis: 1260 mm Y-axis: 1260 mm Z-axis: 100 mm Ledpfx Abeyigrzjnoac Max. workpiece dimensions: 1250 x 1250 mm Max. workpiece weight: 160 kg Laser power: 2 kW Cutting capacity (steel): 12 mm Control: FANUC 16 iL Resonator: FANUC AF 2000 Compressed air requirement: 20 m³/h Electrical connection: 400 V / 50 Hz Connected load: 70 kVA Dimensions (L x W x H): approx. 3200 x 2200 x 2100 mm Weight: approx. 4.2 t Special equipment: HS-2003 sensor cutting head High-pressure cutting device: Clean Cut Aluminum cutting device: Alu Cut Exhaust system Cooling unit The seller accepts no liability for typing or data transmission errors. The machine's visual and technical condition, as well as wear, correspond to its age; used machines are sold without any warranty.

Condition: used, Year of construction: 2007, max. wheel diameter 380 mm gear width 540 mm max. module 7 Control SINUMERIK 840 D Axial travel 600 mm table diameter 317 mm table speeds 100 U/min milling head -swivable + / - 35 Grad milling spindle drive 27,00 kW milling spindle speeds (infinitely variable) 1500 U/min diameter of hob 160 mm cutter length max. 330 mm cutter speeds max. 3000 1/min hob dia. - max. 160 mm swarf cutter lenght - max. 330 mm tangential travel max. 300 mm 10.000 mm/min tangential speed max. 3000 mm/min 7.500 mm/min oil volume 100 l coolant capacity 780 l Counterholder movement 540 mm total power requirement 50,00 kW weight of the machine ca. 16,00 t dimensions of the machine ca. 6,00 x 4,50 x H3,50 m for the following processes: axial hobbing, individual part milling, Worm wheel milling, Laedpfxjyt Rvhe Abnsc roofing, deburring; NC tailstock

Condition: used, Year of construction: 2017, Working hours laser on: 28.313 h Working hours beam on: 8.421 h Laser power: 6000 Watt Working range laser: 3048 x 1524 x 70 mm Max. steel: 25 mm Max. stainless steel: 30 mm Max. aluminium: 30 mm Max. copper: 12 mm Max. brass: 12 mm Length: 11000 mm Width: 6050 mm Height: 2565 mm Machine weight: 12000 kg Electrical connected load: 31 kW Lajdpfx Abeyrfxzonoc Standard configuration - Maximum positioning speed parallel axis x, y: 120 m/min- Maximum simultaneous positioning speed: 170 m/min- Positioning accuracy Pa: +/- 0,05 mm- Repeatability Ps: +/- 0,025 mm- Maximum workpiece weight: 1100 kg- Operation via panel: ByVision Touchscreen and manual control unit Extended machine accessories - nozzle changer 40 positions- Detection Eye - Cut Control- Power Cut Fiber Automation - ByTrans Extended

Year of construction: 2011, condition: ready for operation (used), General Data Machine weight 4700 kg Control Unit Brand AMADA Main Drive Pressing force 500 kN Stroke 200 mm Number of axis 8 Lajdpex D H I Hefx Abnjc This 8-axis AMADA HFE M2 5020 was manufactured in 2011. It features a hydraulic press brake with a maximum press force of 500 kN and a stroke up to 200 mm. Weighing 4,700 kg and operating at a noise level of 74 dB(A), it's CE certified and made in France. If you are looking to get high quality bending capabilities consider the AMADA HFE M2 5020 machine we have for sale. Contact us for more information. Application Types Bending

Condition: excellent (used), Year of construction: 2015, operating hours: 2,200 h, functionality: fully functional, machine/vehicle number: G3158-0645, HYUNDAI WIA MODEL L300C 2 AXIS CNC LATHE WITH FANUC 0i-T. Very Low hours usage -2200 hours cutting time COOLANT SYSTEM - HIGH PRESSURE 20 BAR PARTS AUTOMATION - BARFEED INTERFACE CHIP CONVEYOR - SIDE HINGED CNC CONTROL OPTION - MANUAL GUIDE-I (NC FANUC 0i) PROBING - QUICK TOOL SETTER - MANUAL TRANSFORMER - 35 KVA AND CABLE MACHINE CONSTRUCTION & FEATURES • One Piece Heavy Duty Cast Iron Bed Construction for High Accuracy & Rigidity • 3,000 Rpm High Power Main Spindle • Heavy Duty Cutting with Excellent Performance • 12 Station Rigid Turret • 20 x 24 m/min Rapid Traverse • Hardened & Ground Solid Box Guide Ways MACHINE CAPACITIES Swing Over the Bed Ø 750 mm Swing Over the Carriage Ø 480 mm Maximum Turning Diameter Ø 560 mm Maximum Turning Length 720 mm Bar Capacity Ø 90 mm SPINDLE Chuck Size Ø 305 mm Spindle Bore Ø 102 mm Spindle Speed (rpm) 3,000 rpm Motor (Max/Cont.) 26/22 kW Torque (Max/Cont.) 1,098/929.7 Nm. Spindle Type Belt + 2 Step Gear Spindle Nose A2-8 FEED Travel X 335 mm Travel Z 750 mm Rapid Speed X 20 m/min Rapid Speed Z 24 m/min Slide Type Box TURRET Number of Tools 12 Tool Size - OD 25 mm² Tool Size - ID Ø 50 mm Indexing Time 0.3 Sec/Step TAILSTOCK Taper MT 5 Quill Diameter Ø 100 mm Quill Travel 120 mm Travel 750 mm Lajdpfow Dcdyjx Abnjc TANK CAPACITY Coolant Tank 220 L Lubricating Tank 1.8 L POWER SUPPLY Electric Power Supply 30 kVA Thickness of Power Cable Over 35 mm² Voltage 415 V / 50 Hz / 3 Ph MACHINE Floor Space (L x W) 3,506 x 2,002 mm Height 1,997 mm Weight 6,400 kg STANDARD SUPPLIED MACHINE FEATURES • Ø 305 mm Hollow 3 Jaw Power Chuck • 220 L Coolant Tank • Door Interlock • Chuck Clamp Foot Switch • Total Splash Guard • Quill Type Tailstock • Call Light • Standard Live Centre • Quick Tool Setter • Levelling Pads • Operation Manuals • Electrical & Mechanical Drawings

Condition: refurbished (used), Year of construction: 2001, AMADA MODEL HFE 130-3 130 tons capacity x 3000 bending length hydraulic downstroking press brake complete with OP 2000 7 AXIS cnc control, ERWIN SICK machine mounted electronic guards , side and rear interlocked fencing Model Amada HFE 130-3 downstroke CNC Press brake Year 2001 Tonnage 1300 KN Type OP 2000 CNC Controlled Axis Y1, Y2, X, R1 R2 Z1 Z2 Max. Bend Length 3000 mm Open height 470 mm Stroke Length 200 mm Approach Speed 100 mm/sec Bending Speed 1 - 10 mm/sec Return Speed 1-100 mm/sec Oil Capacity 110 LITRES Motor Power 11 kw Weight 7800 KG kg CNC Control Backgauge Stoke (X axis) 700 mm/s Max gauge 1000mm R axis 250mm can be demonstrated under power Laodpfothgidsx Abnsc BROCHURE AND FURTHER INFORATION AVAILABLE UPON REQUEST

Condition: ready for operation (used), Year of construction: 2016, functionality: fully functional, pressing force: 50 t, overall weight: 3,350 kg, Equipment: safety light barrier, We are offering this ready-to-use Amada HFE MK2 5012, 50 ton, 4-axis CNC press brake. Lsdoy H Hgwopfx Abneac Year of manufacture: 2016 Press force: 50 tons Max. bending length: 1250 mm If you have any questions or need further information, please feel free to send us a message or give us a call. The seller assumes no liability for typing or data transmission errors. The machine's condition in terms of appearance, technology, and wear corresponds to its age; used machines are sold without any guarantee or warranty.

Condition: used, functionality: fully functional, Year of construction: 2004, operating hours: 26,426 h, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, punching force: 20 t, The punching machine is in good condition and has always been serviced on time by certified Amada service representatives. All documentation is included. The drum encoder was recently replaced. The machine is sold complete with software and tools. The punching machine is connected and can be tested on site. Specification: Year: 2004.07 Made in: France Operating hours: 26,426 Power-on hours: 65,006 Control unit: AMADA AMNC-F Punching force: 20 tons Stations: 45 Tools: sold with tooling Software: Linea 5 / Combi 5 (Only works with Windows XP) Sheet length: 2,500 mm Sheet width: 1,270 mm Ljdpsw E Emaefx Abnjac Sheet thickness: 3.2 mm Sheet repositioning: 5,000 mm Workpiece weight: 150 kg Dimensions: L 6080 x W 5120 x H 2318 mm Weight: 16,500 kg Location: Lithuania Test possible: Yes If you have further questions, we will be happy to answer them.

Condition: new, Year of construction: 2026, functionality: fully functional, total width: 2,450 mm, total height: 1,790 mm, total length: 3,470 mm, Oy Foudila Ab is a company, in Kaskinen, Finland with over 45 years of experience in equipment for timber handling. For the past 15 years, we have also been active in pallet industry and have developed a lot of machines over the years for nailing, automatic timber feeding and stacking. We manufacture both standard machines and customized solutions for the customer's purposes. Foudila deck nailing machine, DNM-153 is a compact, flexible, and efficient machinery for production of decks for pallet industry to an excellent price-performance ratio. Thanks to the machine’s high production speed, user-friendly design and board magazines with large buffer, it is well suited for manufacturing both standard and special products in small and large production series with only one operator. The machine is capable of producing over 1000 decks per work shift. The machine is equipped with three nailers with magazines for large nail coils. Each nailing pattern can include 1–3 nails and can also be clinched if needed. The boards are fed into magazines with a large buffer – three cassettes for stringer/under boards and one cassette for deck/upper boards. The machine is controlled and programmed via a modern and user-friendly software interface on a 10” touchscreen, using a Beckhoff control system. Laodpfx Aeyl Tr Nsbnsc Thanks to the machine’s compact design, it requires a very small production footprint and makes installation fast and easy because the machine can be delivered fully assembled. The machine can of course be equipped with a conveyor for finished products, automatic stacker and automatic board feeder. These options can also be installed at a later stage, allowing for investment step-by-step. Please feel free to contact us for more information, technical specifications, and price details.

Condition: ready for operation (used), For sale is a CNC laser cutting system by Amada Co., Ltd., model PROMECAM / FO-3015 NT, equipped with the ASLUL 300 FO Tower automatic loading and unloading system. This is a highly productive industrial unit for automated sheet metal processing, including an integrated tower storage system with automatic material handling for efficient manufacturing processes with minimal manpower requirements. Technical Data – CNC Laser Cutting System AMADA PROMECAM 3015 NT with ASLUL 300 FO Tower Base Machine – Laser System 3015 NT Machine type: CNC laser cutting machine (CO₂ laser, flying optics) Manufacturer: Amada Co., Ltd. / AMADA PROMECAM Model: FO-3015 NT Control: AMNC-F CNC with touchscreen Laser technology: CO₂ laser, flying optics system Laser Power Laser output: 4,000 W Laser resonator: Fanuc AF 4000 Laser principle: CO₂ silent discharge Continuous power stability: ± 1% Working Area X-axis: approx. 3,070 mm Y-axis: approx. 1,550 mm Z-axis: approx. 100 – 200 mm Max. sheet size: approx. 3,000 × 1,500 mm Max. workpiece weight: up to approx. 920 kg Cutting capacity (typical): Mild steel: up to approx. 20 mm Stainless steel: up to approx. 15 mm Aluminum: up to approx. 10 mm Material thickness in general: 0.5 – 20 mm depending on material and laser power Axes and Dynamics 3 CNC axes: X, Y, Z Positioning accuracy: ± 0.01 mm Repeatability: ± 0.005 mm Positioning speed: up to 120 m/min per axis Simultaneous speed: up to 169 m/min Machine Design Flying optics system Heavy-duty cast frame for high stability Automatic pallet changer (2-table system) Automatic cutting head tracking Lajdpfxsyk S Rzs Abnjc Capacitive cutting head Connections Power supply: 400 V Total power consumption: approx. 70 kVA Compressed air requirement: approx. 6 bar Machine Dimensions and Weight Machine weight: approx. 11,000 kg Machine dimensions: approx. Length: 6,700 mm / Width: 4,400 mm / Height: approx. 2,100 mm ASLUL 300 FO Tower System – Automatic Sheet Storage System: automatic loading and unloading system with tower storage Max. sheet size: 3,050 × 1,525 mm Max. pallet weight: up to 3,000 kg Number of pallets: multi-level automatic storage system Pallet change time: approx. 55 seconds Features: automatic loading and unloading automatic material handling automatic pallet changing finished parts handling integration into automated production lines Equipment Flying optics laser system automatic shuttle pallet changer AMNC-F CNC controller ASLUL 300 FO Tower System automatic material handling suitable for industrial series production fully automatic operation possible extremely high productivity reduced setup times minimal personnel requirement Condition Used Technically inspected and fully functional The system can be demonstrated Immediately available Delivery time: upon agreement Freight terms: ex site, loaded free of charge Dismantling / transport / reassembly can be organized