Tube bending machine

AMOB CH-80 CN1

Condition: excellent (used), Year of construction: 2001, travel distance X-axis: 3,500 mm, travel distance Y-axis: 2,500 mm, travel distance Z-axis: 1,600 mm, Travel paths X-axis travel: 3500 mm Y-axis travel: 2500 mm Iajdpfx Ajyifpfob Tjp Z-axis travel: 1600 mm Worktable NC rotary table: 2200 x 1800 mm Max. table load: 12,000 kg Max. spindle speed: 2,500 rpm Tool holder ISO-50 Accessories: - Chip conveyor

Condition: used, Year of construction: 1969, max. wheel diameter 160,175 mm gear width 355 mm max. module 4,5 spindle bore 75 mm centre distance 410 mm min. number of teeth 2, 3 cutter diameter max. 115 mm cutter length max. 105 mm axis distance between cutter and workpiece - max. 138 mm axis distance between cutter and workpiece - min. 30 mm milling head -swivable 120 ° milling spindle speeds 70 - 400 U/min axial-feeds 0,25 - 4,0 mm/U radial feeds 0,09 - 1,5 mm/U total power requirement ca. 9,5 kW weight of the machine ca. 3,5 t dimensions of the machine ca. 1730x1400x1440 mm Equipment/accessories: - Interchangeable wheels - Milling arbors - Clamping devices - Documentation Iaodpfx Absvzhf Sj Tep

Condition: used, Year of construction: 1998, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 550 mm, rotational speed (max.): 12,000 rpm, overall weight: 7,500 kg, For sale: CNC 5-Axis Machining Centre, manufacturer DMG, model DMU 60 P Iajdpewbhq Hjfx Ab Tsp The machine is fully operational and ready for immediate use. In 2021, a new spindle was installed, and all required maintenance has been carried out. History: 2019: New ball screw (KGT) 2021: New spindle 2022: Single-shift operation 2023: Occasional job orders 2024: Taken out of operation but remained connected to power 12/2025: Dismantled, cleaned, and stored Technical Specifications: X travel: 600 mm y travel: 650 mm z travel: 550 mm Control unit: Heidenhain TNC 426 Spindle speed: max. 12,000 rpm Spindle drive power: 15 kW Max. torque: 130 Nm Tool holder: SK 40 Table diameter: 630 mm Max. table load: 500 kg Number of tool pockets: 60 positions Max. tool length: 350 mm Rapid traverse (X/Y/Z): 24 m/min Feed rate: 20 - 10,000 mm/min Total connected load: 44 kVA Space requirements: approx. 7.0 x 6.0 x 2.7 m Machine weight: approx. 7.5 t Please note: Vices or clamping fixtures are not included in this offer. Upon request, we can organise transport and loading, at an additional cost. Europe-wide service available. All prices are subject to VAT. Inspection is possible by appointment. Please contact us—our team is happy to assist you. Trade-in or exchange possible! Machinery Purchase / Sales PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your manufacturing needs? Or are you looking to sell yours? For more information or contact options, please visit our website.

Condition: used, TECHNICAL DETAILS TABLE - Table dimensions : 3100/800 [mm] - Maximum weight upon table : 7000 [kg] - Travels on X/Y/Z axes : 3000/1000/1200 [mm] - Rapid traverses rates (X/Y/Z) : 15000/15000/15000 [mm/min] MILLING HEAD Manual head MILLING SPINDLE - Tool holder type : ISO50 * Spindle speeds : 4000 [rpm] * Spindle power : 27 [kW] TOOL CHANGER - Auto. Tool Changer type : Parapluie - Tool magazine capacity : 24 WEIGHT & DIMENSIONS - Machine floor space : 7913/5043 [mm] - Machine height : 3440 [mm] - Machine weight : 13410 [kg] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 38 [kW] MACHINE HOURS - Number of hours under power : 24689 [h] Ijdpfsw Tnhbox Ab Teap - Number of working hours : 23809 [h] - Number of spindle hours : 7658 [h] EQUIPMENT - CNC : Heidenhain iTNC530 - Electronic handwheel Interface : RS232/RJ45/USB - Interactive programming - Coolant tank - Tool-holders

Condition: excellent (used), Year of construction: 1991, functionality: fully functional, travel distance X-axis: 3,500 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 1,250 mm, table load: 12,000 kg, spindle diameter: 130 mm, spindle speed (max.): 1,000 rpm, table length: 1,800 mm, table width: 1,600 mm, Heidenheim TNC 355 Iasdpjyf Uc Ajfx Ab Top

Condition: used, Year of construction: 2010, Technical details: x-travel: 2600 mm y-travel: 1100 mm z-travel: 900 mm table surface area: 3200 x 1100 mm rotary table diameter: 1050 mm table load: 1,2 t Iedpfjykbfnex Ab Tsap control: Heidenhain iTNC 530 ergoline 19" turning speeds: 20 - 10.000 1/min taper ISO: SK 50 max. torque on the spindle: 288 / 187 Nm tool change unit: 60 Pos. rapid traverse: 40 m/min spindle: 44 / 32 kW weight of the machine ca.: 25 t dimensions of the machine ca.: 6,70 x 3,40 x 2,95 m 5-axis universal machining center, rigid table with integrated NC-rotary table left side and B-axis in milling head, direct measuring system, internal Coolant 40 bar, coolant tank 600 l, Swarf Conveyer Rotoclear airblast through spindle, 3D Touch probe HEIDENHAIN TS 649, mode 4, new milling spindle in 2022 at 25.584h approx. 60.000 h machine ON, approx. 31.000 h Programm ON in total *

Condition: used, Year of construction: 2003, Turning length 1000 mm Spindle bore 65 mm Max. turning dia. 300 mm Spindle speeds 4000 rpm Spindle speeds on live tools 4000 rpm Turret w/12 stations Control: Mazatrol 640 T Nexus Equipped with: 3 pcs. live tools Iaedpfx Aex N A I Njb Tep Various tool holders

Condition: good (used), Year of construction: 2015, operating hours: 35,800 h, functionality: fully functional, Doosan Lynx 220LSY – Sub-spindle CNC lathe SPECIFICATION Control: Fanuc 0iTD Main spindle max. speed: 6,000 rpm Main motor power: 15 / 11 kW Driven tool power: 3.7 kW Number of tool stations: 12 (24 positions) 3-jaw hydraulic chuck: 170 / 135 mm Swing diameter (bed/turret): 600 / 400 mm Max workpiece: Ø 300 x 510 mm Max bar diameter: 51 mm Rapid traverse (X/Y/Z): 36 m/min Y-axis travel: ±52.5 mm Turret indexing time: 0.11 sec Travel ranges: - X: 205 mm - Z: 560 mm Equipment: High-pressure coolant, 0.7 MPa Transformer Chip conveyor Tool setter Collet chuck (with 3 collets) Bar feeder for rods up to 1.5 m Workpiece ejector Workpiece catcher and outfeed system Tool load monitoring Iedpfsya Hqbox Ab Tsap

Condition: ready for operation (used), Year of construction: 2021, travel distance X-axis: 1,050 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 560 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC530 HSCI, spindle speed (max.): 28,000 rpm, spindle motor power: 55,000 W, This 5-axis DMG MORI HSC 105 universal machining center was manufactured in 2021. It offers advanced capabilities for precision machining. Consider the opportunity to buy this DMG MORI HSC 105 universal machining center. Contact us for more information. Additional equipment Ijdpfxox D D Tgj Ab Teap • Tool Taper: HSK-A63 DIN 69893 / Tool Magazine: 30-position disk tool magazine, 60-position pickup chain type • Scraper Belt Chip Conveyor and Machine Bed Flushing / Separate Water Treatment Unit: 980-liter tank and paper filter / Pump: 40 bar / 23 l/min for internal cooling through spindle / Extended Chip Flushing / Rotating Inspection Window / Manual Coolant Flushing Gun / Internal Compressed Air Cooling: Through spindle / EROWA Pallet Handling System Preparation • Documentation: English, Hungarian / Display Text: German/Hungarian / Screen Text: German/Hungarian • DMG MORI Monitoring: D-ME406* DMG MORI Messenger V4 / DMG MORI Software Solutions: DMG MORI Service Agent, DMG MORI NETSERVICE, DMG MORI IoTconnector Machine Benefits Technical Machine Benefits • Rapid traverse speed: 90 m/min • Mounting surface: Ø 950 mm / b-tilt range: +10/-110° / c-rotation range: 360° / maximum table weight: 800 kg • 3d-controller heidenhain itnc530 hsci / operator interface: smart. Nc • Cooling: active cooling for spindle and linear drive • Mpc machine protection control / direct measuring system: with pressurized air cleaning / active cooling: electrical switch cabinet / additional cooling: external compressed air cooling

Condition: ready for operation (used), Year of construction: 2016, overall weight: 2,220 kg, total height: 1,835 mm, controller manufacturer: MITSUBISHI, controller model: Meldas 700, This 8-axis Citizen Cincom L20E-2M8 was manufactured in 2016, designed for precision Swiss-type turning come with FMB bar feeder and LNS chip conveyor. It features a main spindle with a speed of up to 10,000 rpm and a counter spindle operating at 8,000 rpm. The machine accommodates up to 37 tools, enhancing its capability for complex machining tasks. It includes a Mitsubishi Meldas 700 controller for efficient operation. Consider the opportunity to buy this Citizen Cincom L20E-2M8 Swiss type turning machine. Contact us for more information. CITIZEN Cincom L20E-2M8 with FMB Bar feeder and LNS chip conveyorThe machine is suitable for efficient turning up to 20 mm in machine is designed to accommodate up to 37 tools for machining complex products. Tool sub-assemblies set:Vertical holder with 5 tools4–7 rotating tools for transverse radial machiningDrilling tools 3–9 for front machining0–4 rotating tools for counter spindle4–10 drilling tools for counter spindleBasic configurationBasic bed: block casting with strong linear guides (thermal and vibration stability)Main spindle: 10,000 rpm, C-axis, Ø passage 26 mm (max. bar Ø20 mm)W1: vertical holder with 5 tools (12 × 12 × 130 mm)3× GSC1310 radial rotating tools ER16 (1 kW, 7,500 rpm)GSE3210 rotating unit adjustable 0°/90° for milling unit (3× GSC1310 ER16)U124B drilling block (2+1) for deep holesCounter spindle: 8,000 rpm, optional C-axis, power 0.75/1.5 kWU153B driven tool unit for counter spindle (0.75 kW) + 4× SAU819 adapters Ø19.05Controller: Mitsubishi Meldas 700 (Windows OS, improved processor, LCD 8.4")Simultaneous machining on main and auxiliary spindlesNew sliding door cover design, space-savingTechnical dataMain spindleMax. turning length: 200 mmThroughput Ø: 26 mmMax. bar Ø: 20 mmSpeed: 200–10,000 rpmPower: 2.2 / 3.7 kWPositioning: C-axis (0.001°)Counter spindleMax. bar Ø: 20 mmSpeed: 200–8,000 rpmPower: 0.75 / 1.5 kWPositioning: C-axisMax. workpiece length in collet: 80 mmDriven toolsSpeed: 200–7,500 rpmPower: 1 kW5 tools (vertical holder) + 4–7 radial + 3 in Z-directionTools5 tools (12 × 12 × 130 mm)3-position drilling block on counter spindle (3× Ø25.4 mm)Back machining holders: 3–6 (Ø19.06 mm)GuidesCollets: E145Guide bushing: Neukomm 22.001Machine ER16 / ER11 Additional equipment Iodpfxjx D Ilto Ab Teap • Clamping unit Ø25 mm • Pump 15 bar for rinsing the counterspindle • SAU819 adapters up to Ø8 mm • Transformer 3×400V/3×200V, 10 kW • Swarf conveyor LNS MH-HB • FMB Minimag 20/3200 bar feeder Dimensions Machine Depth 2300 mm