Bandsaw semi-automatic

ANBAS TR 300 DG

Condition: new, capacity 90 degrees: round 350 mm capacity 90 degrees: square 330 mm 450x320 saw band length 4250x34x1,1 mm band speed 40 + 80 m/min table height 845 mm saw band width 34 mm total power requirement 2,2 kW Rcjdjfgyicopfx Agzok weight of the machine ca. 0,985 t dimensions of the machine ca. 1,4 x 2,0 x 2,2 m Double miter band saw, hydraulic semi-automatic, DGS 350/450 HA-I · miter left + right 60° without machine conversion · 34 mm saw blade width · Large material support turntable, ball bearings · To position the saw blade guides using a very wide linear guide · Strong, robust transmission · Large chipboards · Infeed and outfeed roller Removable chip tray (disinfection) · Free-standing control panel, safe and ergonomic · Storage space for tapes, consumables · Cutting pressure regulator Feed regulator · Fully hydraulic vise Preload super fast (front loading) · Material height sensor (automatic cut start detection) Semi-automatic function: 1. Clamp material 2. Saw starts 3. Rapid lowering to the start of the material or the same for series cutting cut 4. Saw band off 5. Raise the frame to just above the material 6. Open the vise Optimum, material-independent cutting result through fine adjustment of the saw frame by means of: *Pressure Control Valve (Cutting Pressure Force) *Feed Control Valve (Speed) *Switch with pictogram, easy and clear to use

Year of construction: 2025, condition: new, The manual length stop with hand wheel and electronic dimension display MD 100 h is ideal for frequently changing section lengths and for stopping long materials. It enables the carriage to be moved quickly and precisely using a hand crank. Existing machines / roller conveyors can be retrofitted at any time. Product Details: • Suitable for hitting steel profiles and solid materials • Hand wheel drive for the carriage • Pneumatic stop clamping with high holding power • digital actual length display in the working area • Direct distance measurement via sensor / magnetic tape • Control with dimensional error compensation • Trolley with 3 ball bearings • raise and lower manual arm • Cable chain with steel storage tray • Standard measurement lengths: 1m to 6m, maximum up to 20m • Total length of the system = measuring length + 0.5 m • Left or right hand versions available • Mounting screws • Accesories: – Stop arm with spring damping – Arm retraction with impact damping via pneumatic cylinder Rjdpjidmp Tofx Agzeck – pneumatic arm raise / lower – Piece counter for the number of pieces/cuts made – various material roller conveyors

Year of construction: 1989, condition: used, cutting diameter 420 mm saw band length 6300 mm table height 700 mm 0 5,5 kW cutting speed 20-130 m/min Rcedpfx Aorc I H Eogzek min. cut-off length 6 mm min. dia. 10 mm weight of the machine ca. 2,9 t dimensions of the machine ca. 2,4x3,3x2,4 m Fully automatic band saw, saw band tension hydraulic, cutting feed continuously variable, material feed hydraulic, automatic feed with horizontal vice. Clamping force: approx. 400-2000 daN Coolant supply via three coolant nozzles, approx. 135 l, approx. 30 l/min.

Year of construction: 1992, condition: ready for operation (used), Working length: 4300mm, pressing force: 2000kN, connected load: 15kW, weight: 18t, including tools. Rcodpfx Agsi Dx Sbjzsk

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1999, overall weight: 22,800 kg, pressing force: 250 t, CNC press brake Manufacturer: Weinbrenner Type: GP250 Machine specification:- Crowning -Matrix displacement -Rear stop type 2 Rcedpsr Sxq Rjfx Agzsk -Front bending aid (removed for transportation) -DNC 900PS control unit All documentation for the machine is available.

Year of construction: 1982, condition: good (used), machine/vehicle number: 82-540, Offer 18474 Technical data: - Flat steel shears cuts flat up to 100 x 18 mm - blade length approx. 250 mm - Profile steel shear cuts angles - 90° up to 100 x 10 mm - 45° up to 70 x 8 mm - Bar steel shears cut round steel 90° up to 36 mm - square steel 90° up to 30 mm - Notching device sheets up to 8 mm - Hole punching machine - pressure capacity approx. 50 t Rcsdpfx Agsg Eubnezjk - throat 350 mm - punches in steel up to 20 mm Ø in 15 mm - drive 400 V / 3 kW - space requirement approx. W 1100 x H 1700 x D 2300 mm - weight approx. 1900 kg

Condition: new, Year of construction: 2022, IN STOCK -- Semi-automatic metal bandsaw machine with high cutting precision! With this machine, miter cuts up to 45° on the left and up to 30° on the right are possible (swivel range 45° on the left and 60° on the right) Technical data: ● Cutting range: - 90° round: 280 mm / square: 240 mm / rectangular: 420 x 200 mm Rodpfomf T Hpsx Agzock - 45° right round: 260 mm / square: 240 mm / rectangular: 260 x 200 mm - 30° right round: 170 mm / square: 160 mm / rectangular: 160 x 160 mm - 45° left round: 200 mm / square: 180 mm / rectangular: 250 x 100 mm ● Drive power: 0,9-1,5 kW / 400 V / 50 Hz ● Band saw speed: 35 / 70 m/min ● Saw blade dimensions: 3270 x 27 x 0,9 mm Basic equipment: ● Hydraulic control of the saw frame ● Automatic height limitation of the saw frame via contact sensors ● Easy and convenient clamping of the material via a hydraulic short-stroke cylinder ● Hydraulic cutting pressure regulation ● Simple, continuous adjustment of the saw for miter cuts ● Electrical blade tension monitoring with saw blade breakage control

Condition: used, Radial drilling machine CSEPEL type RFh 75 / 1500 Machine no. No. 13704 Year of construction 1985 Drilling capacity in steel Ø 75 mm Drilling capacity in cast iron Ø 90 mm Spindle holder MK 5 Nominal throat depth 1500 mm Largest projection of the spindle 1500 mm (to the column) Smallest projection of the spindle 440 mm (to the column) Distance spindle nose - clamping surface 370 - 1700 mm Cantilever height adjustment 950 mm Table size / clamping surface 1800 x 1100 mm Column diameter 450 mm Pinol stroke 380 mm Spindle speed 19-1900 rpm 21 steps Feed rate 0.047-2mm/rev. 12 steps Motor power 11 kW Redelhwr Repfx Agzock Mains connection 380 Volt, 50 Hz, 15 kW - Clockwise/anticlockwise rotation of the drilling spindle via hand lever switch - Hydr. gear shift for spindle speed and feed speed - Hydro-mechanical central clamping - Motorized boom height adjustment - Without coolant device - Machine light - Operating instructions Space requirement: Length 2720 mm x width 1170 mm x height max. 3770 mm Transport height with motor on the column: 3500 mm Transport height without motor on the column: 3250 mm Weight: 6.3 tons good condition

Condition: refurbished (used), Year of construction: 2016, functionality: fully functional, type of input current: three-phase, overall weight: 1,000 kg, input frequency: 50 Hz, nominal power (apparent): 250 kVA, type of output current: three-phase, Equipment: type plate available,

Condition: new, cutting diameter 235 mm dimensions of saw-band 2645 x 27 x 0,9 mm cutting width 280 x 190 mm cutting speed 45/90 m/min 120 mm 120 mm Rjdpfx Agjp Scqyjzeck 190 mm Impact energy 170 mm connected load frequency 400 Volt total power requirement 1,1 kW weight of the machine ca. 290 Kg dimensions 1,2 x 0,8 x 1,2 m Double miter band saw -Miter cuts up to 60° left and 45° right -Vice with quick clamping device -Band tension control -Electr. Automatic cooling