Vertical machining center

AWEA AF-1400

Condition: used, Year of construction: 2008, functionality: fully functional, travel distance X-axis: 2,050 mm, travel distance Y-axis: 850 mm, travel distance Z-axis: 800 mm, rapid traverse X-axis: 15 m/min, rapid traverse Y-axis: 15 m/min, rapid traverse Z-axis: 12 m/min, feed rate X-axis: 8 m/min, feed rate Y-axis: 8 m/min, feed rate Z-axis: 8 m/min, table width: 850 mm, table length: 2,200 mm, table load: 4,800 kg, spindle speed (min.): 10,000 rpm, distance table to spindle center: 950 mm, Equipment: chip conveyor, documentation/manual, Johnford VMC 2000 vertical machining center, CNC Heidenhain iTNC 530. X-axis – Longitudinal 2,050 mm Y-axis – Transverse 850 mm Z-axis – Vertical 800 mm Spindle-to-table distance 150-950 mm Main spindle to column distance 885 mm Table Surface 2,200x850 mm Maximum weight 4,800 kg Spindle Head Spindle taper - BT-40 (BIG PLUS System) Speed range (2) 10,000 rpm Motor HP 25 Equipped with: - Internal coolant system 20 bar - Part probe - Tool probe - Rigid tapping - Electronic handwheel - 2 longitudinal chip conveyors - Separate tank with filtration unit - Full enclosure Lajdpjxdiigofx Ahaoh

Condition: used, Year of construction: 2004, Technical details: x-travel: 1500 mm y-travel: 1000 mm z-travel: 1000 mm control for program: TNC 530 spindle hours: noch nicht bekannt h milling head speed: 1: 30 bis 930 und 2: 930 bis 4000 / steples U/min tool taper: horiz./vertical: SK 50 (DIN 69871/Din 69872 Form A) max. torque on the spindle: 1000 Nm spindle head swivable left - right: 90 ° feed: 1 - 6000 mm/min feed power: 30 kN kN rapid traverse: 15 m/min Number of tools: 1 St. table clamping surface LxW: 1600 x 800 mm table load: 40 kN kN voltage: 400 V / 50 HZ V total power requirement: 42 kW Weight approx.: 15,2 t compressed air: 6,3 bar dimension machine xH: 3,1 x 4,7 x 2,6 m Ljdeu Nc Rijpfx Ahaoah dimensions: Kühlfilter: 1,9 x 1,6 x 1,4 mm space requirements approx. LxWxH: ca. 38,5 m² m² Applications: Milling, drilling; tapping, boring. with direct coded length measuring systems the guideways of the 3 axes are on flat guideways CTS and external cooling Milling head position controlled +/-90° milling spindle nominal drive power 22 kW with integrated hydraulic power unit up to 100bar operating pressure with coolant unit with filtration, with high pressure pump 60 bar (internal cooling), nominal delivery 20 l/min. and low pressure pump 4 bar (external cooling) as well as spray gun Hinged belt chip conveyor DGS, type SSF 600 P50 Accessories: Measuring probe SK40 Reference tool SK40 Milling head SEMPUCO *

Condition: like new (used), Year of construction: 2014, operating hours: 8,815 h, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, controller manufacturer: Heidenhain, rotational speed (max.): 15,000 rpm, spindle nose: BT40, number of slots in tool magazine: 40, 5-AXIS MACHINING CENTER YCM TCV 3000A-5AX TECHNICAL SPECIFICATIONS • Model: YCM TCV 3000A-5AX Laodpfxjzcx A Uj Ahash • Year of Manufacture: 2014 • Control: Heidenhain (5-axis simultaneous) • Travel (X / Y / Z): 3,000 x 800 x 800 mm • B-Axis (Swivel Head): 110º • C-Axis (Rotary Table): Ø 800 mm • Spindle Speed: 15,000 RPM • Tool Taper: BT40 Big Plus • Tool Changer (ATC): 40-station magazine • Through-Spindle Coolant: 20 Bar • Probing Systems: Renishaw RMP60 workpiece probe & Renishaw TS-27R tool setter • Workzone Divider: Partition wall for pendulum machining • Chip Management: Chip conveyor included • Usage: General subcontracting / job shop environment. PRICE AND FURTHER INFORMATION AVAILABLE UPON REQUEST (CNC, SIEMENS, HASS, LAGUN, FAGOR, CINCINNATI, HEIDENHAIN, MACHINING, PINACHO, MORISEIKI, MILLING MACHINE, LATHE, GRINDER, BORING MACHINE, PRESS, LASER, SHEAR, PRESS BRAKE)

Condition: new, Year of construction: 2023, functionality: fully functional, type of input current: three-phase, travel distance X-axis: 1,400 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 610 mm, workpiece weight (max.): 1,400 kg, total height: 2,492 mm, total length: 4,367 mm, total width: 3,070 mm, table length: 1,500 mm, table width: 650 mm, spindle motor power: 11 W, rapid traverse Z-axis: 24 m/min, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, spindle nose: Iso 40, spindle speed (max.): 8,000 rpm, spindle speed (min.): 40 rpm, tool diameter: 75 mm, tool length: 250 mm, Equipment: documentation/manual, rotational speed infinitely variable, NEW vertical machining center "AWEA BM-1400 II" with FANUC 0i-MF Plus CNC Accessories present: 4th axis interface Air blow system Left side auger chip conveyors Coolant through spindle ( CTS ) at 20 bar Coolant gun Fairing bottom washing system 390 liter refrigerant collection tank Automatic power-off system Lajdorg Htpopfx Ahaeh Alarm light & work light

Condition: used, Year of construction: 2004, Technical details: x-travel: 600 mm y-travel: 700 mm z-travel: 60 mm tool taper: SK40 magazine place: 30 Stück table surface area: 630 mm 5axis-CNC-Milling Machine Make: DMG Type: DMU 60 P YOM: 2004 Laodjw Dud Sopfx Ahajh *

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, type of input current: three-phase, travel distance X-axis: 1,020 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, workpiece weight (max.): 800 kg, number of slots in tool magazine: 30, controller manufacturer: Fanuc, total height: 2,700 mm, total length: 4,080 mm, total width: 2,400 mm, overall weight: 7,000 kg, table length: 1,200 mm, table width: 510 mm, controller model: Oi-MC, coolant supply: 15 bar, spindle motor power: 15,000 W, number of spindles: 1, rapid traverse Z-axis: 30 m/min, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 36 m/min, spindle nose: BT40, spindle speed (max.): 12,000 rpm, table load: 800 kg, Equipment: chip conveyor, rotational speed infinitely variable, Doosan NM510 Vertical Machining Centre Machine Type: 3 Axis Vertical Machining Centre Year: 2008 Control: Fanuc Series Oi-MC Condition: Very Good Laodpov Iq Ezjfx Ahajh Includes Swarf Conveyor Chiller MCF20 Coolant Filter Autolube 6 x Tool Holders Notes Vice and clamping block in photos not included Technical Specifications Table Size: 1200 x 510mm Table Load: 800kg Travel (X-Axis): 1020mm Travel (Y-Axis): 510mm Travel (Z-Axis): 510mm Max Spindle Speed: 12,000rpm Spindle Power: 18.5/15/11kW Spindle Taper: BT 40 Rapid Traverse (X/Y/Z): 36/36/30m/min Tool Storage Capacity: 30 tools Tool Change Time (T-T/C-C): 1.7/3.5sec Machine Dimensions: 4080 x 2400 x 2700mm Machine Weight: 7,000kg Notes: *Specifications are given in good faith but not guaranteed*

Condition: new, Year of construction: 2025, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 36 m/min, rapid traverse Z-axis: 36 m/min, feed rate X-axis: 15 m/min, feed rate Y-axis: 15 m/min, feed rate Z-axis: 15 m/min, total height: 2,700 mm, total length: 2,800 mm, total width: 3,550 mm, table width: 600 mm, table length: 1,200 mm, table load: 800 kg, overall weight: 7,500 kg, spindle speed (max.): 8,000 rpm, spindle nose: SK40, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Vertical machining center with extensive standard equipment: - FANUC or Heidenhain control - internal coolant supply - SK 40 - 24-position tool magazine, double-arm gripper - Glass scales in all axes - Chip conveyor Lsdevtz Dxepfx Ahajah - Electronic handwheel - Compressed air through the spindle - 30-position tool holder package - Complete 24-position tool equipment - Initial filling of coolant lubricant - Installation-commissioning-training - Guarantee up to 5 years possible HAITIAN European branch Ebermannsdorf

Condition: ready for operation (used), Year of construction: 2011, General Data Machine weight 6500 kg Control Unit Brand FANUC Main Drive Number of axis 3 Movement X-Axis Movement 1020 mm Y-Axis Movement 540 mm Z-Axis Movement 510 mm Ledpfx Ahox D Igdoaoah Additional Equipment Through-spindle cooling Preparation for 4th axis External cooling unit This 3-axis DOOSAN DNM 500 was manufactured in 2011. It features a robust table size of 1200 × 540 mm and axis travels of 1020 × 540 × 510 mm. Equipped with through-spindle cooling and preparation for a 4th axis, it offers enhanced machining capabilities. Consider the opportunity to buy this DOOSAN DNM 500 vertical machining centre. Contact us for more information. Application Types Milling

Condition: new, Year of construction: 2023, functionality: fully functional, type of input current: three-phase, travel distance X-axis: 1,200 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 610 mm, workpiece weight (max.): 1,200 kg, total height: 24,920 mm, total length: 38,970 mm, total width: 30,700 mm, table length: 1,300 mm, table width: 650 mm, spindle motor power: 11 W, rapid traverse Z-axis: 24 m/min, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, spindle nose: Iso 40, spindle speed (max.): 8,000 rpm, spindle speed (min.): 40 rpm, tool diameter: 75 mm, tool length: 250 mm, tool weight: 7 g, Equipment: documentation/manual, rotational speed infinitely variable, NEW vertical machining center "AWEA BM-1200 II" with FANUC 0i-MF Plus CNC Accessories standard: Lasdperhi Rksfx Ahaoh 4th axis interface Air blow system Left side auger chip conveyors Coolant through spindle ( CTS ) at 20 bar Coolant gun Fairing bottom washing system 390 liter refrigerant collection tank Automatic power-off system Alarm light & work light

Condition: ready for operation (used), Year of construction: 2014, operating hours: 13,000 h, functionality: fully functional, travel distance X-axis: 750 mm, travel distance Y-axis: 500 mm, total height: 2,700 mm, total length: 3,800 mm, total width: 2,350 mm, table width: 500 mm, table length: 750 mm, overall weight: 9,500 kg, spindle speed (max.): 10,000 rpm, number of slots in tool magazine: 22, Equipment: chip conveyor, documentation/manual, For sale: AXA DBZ milling machine - 2014 Heidenhain iTNC 530 HSC control 2 machining areas of 750x500 5-axis rotary table on one table (continuous) 22-tool magazine, SK40 Optical scales on all axes Mist extractor Chip conveyor High-pressure pump External coolant filtration unit Machine in good working order, under power = can be tested 3-month warranty Installation and commissioning at the customer's site possible Lsdpfx Aoy D Enhohajah Suitable for pendulum machining (machining on one table, loading on the other).