USED FORGING HAMMER MANUF. BECHE, MODEL L 10

BECHE L 10

Condition: excellent (used), Year of construction: 1984, functionality: fully functional, turning diameter over cross slide: 630 mm, spindle bore: 320 mm, turning diameter: 1,200 mm, turning diameter over bed slide: 930 mm, turning length: 3,000 mm, Lathe in very good technical condition, has seen very little use and was not used for machining pipes. The Poręba TPL 90/3m lathe (also listed in market nomenclature as a variant of the TPK 90 series) is a textbook example of an Oil Country Lathe / Hollow Spindle Lathe. This model fulfills all the specific criteria for machines intended for the Oil & Gas sector: • Massive spindle bore (Big Bore): This version features a spindle bore with a diameter of 320 mm (approx. 12.5 inches), allowing for easy insertion of thick-walled drill and casing pipes. • Dual chucking system: The headstock is designed for mounting two independent lathe chucks (front and rear, typically 28 inches in diameter), ensuring the pipe is clamped and stabilized at both ends of the spindle. • Optimal working dimensions: The 3m designation defines a turning length between centers of 3000 mm, which, combined with a swing over bed of 930 mm (hence the "90" in the name), allows for machining heavy-duty pipeline components. • Exceptional rigidity: FUM POREBA factory machines are renowned for their monolithic, very wide and heavy cast iron beds, which effectively dampen the immense vibrations generated during taper thread cutting. In international used machinery catalogues, this specific Poręba model is directly classified under the Oil Field Lathes category. TECHNICAL SPECIFICATIONS: Geometric parameters and machining ranges • Swing over bed: 930 mm / 36.6 in • Swing over cross slide: 630 mm / 24.8 in • Swing in gap: 1200 mm / 47.2 in Gujdjy Sf Azjpfx Aihoh • Maximum turning length between centers: 3000 mm / 120 in • Bed width: 585 mm / 23.0 in Headstock • Spindle bore diameter (Hollow Spindle): 320 mm / 12.6 in (in US nomenclature classified as a 12.5" version) • Spindle speed range: 5 – 250 rpm, or modified versions up to 710 rpm • Number of spindle speed steps: 18 Feed and thread cutting system • Longitudinal feed range: 0.1 – 12.8 mm/rev / 0.004 – 0.504 in/rev • Cross feed range: 0.05 – 6.4 mm/rev / 0.002 – 0.252 in/rev • Types of threads cut: Metric, Inch (Whitworth), Module, Diametral Pitch (DP) Tailstock • Tailstock quill diameter: 130 mm / 5.1 in • Tailstock quill travel: 300 mm / 11.8 in • Internal taper of quill: Morse No. 6 (MT6) Drive and dimensions • Main motor power: 22 kW / 29.5 HP • Overall length: approx. 5500 mm / 216.5 in • Overall width: approx. 1750 mm / 68.9 in • Overall height: approx. 1500 mm / 59.0 in • Total weight: approx. 8000 kg / 17,630 lbs

Condition: good (used), Year of construction: 1970, functionality: fully functional, Single Column Vertical Turning Lathe | Froriep DS 14 NC The machine was overhauled in 2009, recently cleaned, and is in good condition. Gedpfxeyft S Ao Aihjuh - Table diameter: 1,400 mm - Swing diameter: 1,600 mm - Turning height: 1,500 mm - Siemens control type 840 D - Automatic tool changer - Workpiece weight: 6,500 kg - Vertical slide travel: 1,000 mm - Spindle speed: 10–315 rpm - Feed rate: 3,600 mm/min Inspection is possible at any time by prior arrangement. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: Froriep | DS14 | DS14NC

Condition: like new (used), Manual profile grinder UTMA model P20 Gedoff H E Ropfx Aihjuh

Condition: excellent (used), Year of construction: 2006, • Configuration: 3 linear axes (X/Y/Z) + B-axis tilting head • Travels (X/Y/Z): 2,500 / 920 / 820 mm • Table: 3.100 × 900 mm · max load 3.000 kg • Spindle: 20–18.000 rpm · HSK-A63 · 35/25 kW • Rapids: X 100 m/min · Y/Z 60 m/min • Tool magazine: 120 tools Gedey Skmrepfx Aihsuh • Control: HEIDENHAIN iTNC 530 Brand new Spindle installed as end of April 2026

Year of construction: 2002, condition: not inspected (used), Robot Guedpogu U Itjfx Aiheh no control panel + connection cables Used, untested robot. No technical documentation available. Not tested.

Condition: good (used), Year of construction: 2000, control type: NC control, controller manufacturer: Davi Smart, number of rollers: 4, roller (bottom) diameter: 340 mm, roller (top) diameter: 370 mm, side roll diameter: 320 mm, roller length: 3,100 mm, sheet thickness (max.): 25 mm, overall weight: 18,500 kg, total length: 5,900 mm, total width: 2,200 mm, total height: 2,300 mm, power: 30 kW (40.79 HP), Equipment: cone bending device, 4 roll plate bender Davi Promau - MCB-3037 MACH-ID 9751 Make: Davi Promau Type: MCB-3037 Control: Davi Smart Year: 2000 Conical bending attachment Extended roll end for section bending jobs Digital read out position side rolls Central lubrication CE-Declaration Rolling width: 3100mm Rolling thickness 3x toproll Ø:20mm Rolling thickness 5x toproll Ø:25mm Guodpfx Aozi Ra Rsiheh Rolling thickness prebending: 22mm Top Roll Ø: 370mm Bottom Roll Ø: 340mm Side roll Ø: 320mm Number of rolls: 4 Rolling speed: 0-5 Adjustiment lower roll: 0-200mm/min. Adjustment side rolls: 0-200mm/min. Number of driven rolls: 2 Power: 30kW Length: 5900mm Width: 2200mm Height: 2300mm Weight: 18500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2012, Control: Fanuc 0i-TD Equipment: - various tool holders - various driven tools - C-axis, driven tools Max. turning diameter: Ø 500 mm Godsy Dqb Topfx Aiheuh Max. turning length: 600 mm Bar capacity: Ø 75.5 mm Spindle speed: 3500 rpm Spindle nose: A2 - 8 Machine weight: 6,700 kg

Condition: good (used), functionality: fully functional, Year of construction: 2000, sheet thickness steel (max.): 16 mm, back gauge: 1,000 mm, cutting length (max.): 3,150 mm, foot switch motorized arrester behind cutting angle adjustment Technische Daten / technical details: Schnittleistung / max. cutting capacity 16 mm max. Schnittlänge / max. cutting length 3150 mm Anschlag / limit stop 1000 mm Godpfxov Syyvs Aihsuh Gewicht der Maschine / weight 16300 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, travel distance X-axis: 730 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 560 mm, spindle speed (max.): 12,000 rpm, For sale is a very well-maintained 5-axis simultaneous machining center, DECKEL MAHO (DMG MORI) type DMU 60 monoBLOCK, manufactured in 2009. The machine is characterized by very low spindle hours and extensive equipment. Highlights & General Information: Manufacturer / Model: DECKEL MAHO (DMG MORI) DMU 60 monoBLOCK Year of manufacture: 2009 Control system: HEIDENHAIN iTNC 530 Operating hours: approx. 30,000 h Spindle hours / program runtime: approx. 8,000 h Technical Data: Travel ranges: X = 730 mm Y = 560 mm Z = 560 mm 4th axis (B-axis / swivel head): +30° to -120° (NC swivel milling head with hydraulic clamping) 5th axis (C-axis / rotary table): 360° (endlessly rotating NC rotary table, resolution 0.001°) Main spindle: Max. 12,000 rpm Tool holder: SK 40 Tool changer: 60-position chain magazine Equipment & Accessories: Internal coolant supply (IKZ) including paper band filter system Chip conveyor Workpiece measuring probe: DMG TS 649 Complete documentation and machine keys available Upon request, for an additional charge, loading and transport (throughout Europe) can be arranged. All prices plus VAT. Inspection possible by appointment. Contact us, our team will be happy to assist you further. Trade-in or exchange possible! Machine purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Gusdpfozz Snyjx Aihoh Do you need a high-quality but affordable metalworking machine for your production? Or do you want to sell yours?

Condition: used, Technical details: Gedpfxox Ngzyo Aihouh turning diameter over bed: 3800 mm turning diameter over slide rest: 3200 mm turning length: 12000 mm faceplate turning speed range -stepless-: 2 - 200 U/min max. workpiece weight: 90.000 kg bed width: 4000 mm 2 steadies *