Band saw

Berg & Schmid

Condition: used, Year of construction: 2025, cutting diameter Ø 255 mm capacity 90 degrees: square 230 mm capacity 90 degrees: flat 300 x 180 mm dimensions of saw-band 2765 x 27 x 0,9 mm capacity 45 degrees: round 210 mm capacity 45 degrees: square 190 mm capacity 45 degrees: flat 200 x 160 mm capacity 60 degrees: round 135 mm capacity 60 degrees: square 110 mm capacity 60 degrees: flat 130 x 100 mm cutting speed 18- 110 m/min power requirement 1,5/ 1,8 kW dimensions 1,7 x 1,95 x 1,83 m weight of the machine ca. 0,8 t Rcodpezv Uldefx Af Aof full automatic one side miter bandsaw NC- controlled - miter cut left 45° full automatic mode - miter cut left 60 half automatic mode - CNC- controll for 10 saw programms and 99 subroutine - automatic lenght movement with ballscrew - roller conveyor feed side - stepless cutting speed

Condition: ready for operation (used), Year of construction: 2015, A vertical high-performance milling and thread machining center DMG Mori is available. Travel X/Y/Z: 700mm/420mm/380mm, max. workpiece dimensions X/Y: 880mm/550mm, table dimensions X/Y: 840mm/420mm, max. table load: 400kg, spindle speed: 10000rpm, spindle power: 25kW, torque: 45Nm, tool positions: 15, tool holder: BT30, rapid traverse: 60m/min, feed force: 5kN. Machine dimensions X/Y/Z: approx. 1650mm/2350mm/2500mm, weight: approx. 4000kg, control: Siemens Sinumerik 840D Solutionline, machine hours: 28892h, spindle hours: 12674h. Documentation available. An on-site inspection is possible. Rcsdpfxsynlu Uj Af Asf

Condition: excellent (used), Year of construction: 2006, Berg & Schmid CNC Sawing Machine Year of manufacture: 2006 Control system: - CNC control (freely programmable) Cutting range: - Round: 410 mm - Flat: 410 mm - Width 3500 x Length 2000 x Height 2200 mm - Working height 730 mm Cutting speed: - 12 – 110 m/min. Rjdszp Inlepfx Af Ajcf - Material feed via precision ball screw and linear guide. - Hydraulic saw blade tensioning. - Automatic double-sided saw blade free-travel device. - Hydraulically driven chip conveyor. - Chip pressure regulation for thin-walled tubes and profiles. - Frequency-controlled sawing drive, stepless. - Automatic initial cut function. - Saw blade path monitoring Sawing drive: - 5.5 kW Accessories: - 10 new saw blades Delivery time: - Immediate

Condition: used, Year of construction: 2014, cutting diameter 305 mm saw band length 3370 mm cutting width 350 mm dimensions of saw-band 3370 x 27 x 0,9 mm 305 mm 260 mm 350 x 200 mm 250 mm 230 mm 230 x 200 mm 175 mm 155 mm 170 x 100 mm Rodpfozu A R Esx Af Aecf total power requirement 1,5 / 1,8 kW weight of the machine ca. 600 kg dimensions of the machine ca. 1700 x 1500 x 1950 mm Features: - Semi-automatic operation via automatic saw frame lowering - Miters: left 60°, right 45° - 2 speeds: 40 and 80 m/min - Solid material support table - Operatorâ??s manual

Condition: used, Technical details: Rodpfx Aeu R A Dlof Aecf length: 750 mm height: 800 mm welding current: 120 machine weight ab.: 180 kg dimensions L x W x H: Schweißgerät: 0,75 x 0,52 x 0,8 m dimensions L x W x H: Kompressor: 1,2 x 0,5 x 0,9 m Plasma cutter with piston compressor optional cutting device: make Jäckle, year: 2005 - cutting power 30 kVA - TIG / E-welding - cooling type F - with torch package 6,0 meter - with ground cable 12,0 meter OPTIONAL: piston compressor: make Schneider type Universal 650-60D, year: 1993 - filling capacity 500 liters/min. - volume flow 616 liters/min. - Compressor pressure 10 bar - power max. 4 kW - incl. compressed air hose approx. 4 meters - mobile on two wheels *

Year of construction: 1999, condition: ready for operation (used), Saw blade diameter: 350mm, cutting range at 90°: round: 110mm, square: 85mm/85mm, flat: 180mm/85mm, cutting range at 45°: round left/right: 105mm/110mm, square left/right: 85mm x 85mm/85mm x 85mm, flat left/right: 130mm x 85mm/130mm x 85mm. Saw blade bore: 40mm, speed: 74rpm, working height: 925mm. Dimensions X/Y/Z: 1150mm/1500mm/2100mm, weight: approx. 500kg. Rodpfxstufcdj Af Aecf

Condition: ready for operation (used), Year of construction: 2019, This BERG & SCHMID VKS 370 VA was manufactured in 2019. It features a fully automatic hydropneumatic vertical circular saw with CNC frequency conversion. The machine includes a roller conveyor on the feed side (3m) and discharge side (2m), enhancing material handling. Starter Kit 1 with circular saw blades and coolant concentrate is also included. Consider the opportunity to buy this BERG & SCHMID VKS 370 VA Circular Metal Saw. Contact us for more information. Additional equipment • Starter Kit 1 consisting of 2 circular saw blades and 10 liters of coolant concentrate. • Leveling element (1 set = 4 pieces) with stud bolt M 12x100. • Feed side – left. • Feed roller conveyor URB 290, Length 3000 mm. • Feed adapter for URB 290/400. • Outfeed roller conveyor URB 290, Length 2000 mm. • Removal adapter for URB 290/400. • Connecting piece for machine, attachment on the right. • LM 55 M/man. Length stop, Measuring length 2000 mm. Machine Benefits Technical Machine Benefits • Automatic saw with a roller conveyor feed side length of 1500 mm and a discharge side length of 1000 mm. • Sheet metal tray for setting the machine. • Control unit attachment of the control unit to the swivel arm. Extra Information Rcedpfx Aox Nr Sqef Ajf Machine still under power

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 1,600 mm, travel distance Y-axis: 1,250 mm, travel distance Z-axis: 1,000 mm, Vertical machining center Manufacturer: DMG Type: DMU 160 P duoBLOCK Year of manufacture: 2007 Control system: Heidenhain ITNC 530 Axes: 5-axis simultaneous Travel distances X: 1600 mm Y: 1250 mm Z: 1000 mm Tool changer: 60 tool positions Spindle speed: 18,000 rpm - HSK 63 - Measuring probe - Blum laser tool measurement system - Coolant tank, 980 liters Rsdpfxszhufho Af Ascf - Internal coolant system, 40 bar - Chip conveyor - Electronic handwheel - Operating mode 4 - Preparation for 3D Quickset (software) - Universal milling head with controlled A-axis Machine from a space technology institute. Excellent condition. Subject to errors and prior sale.

Year of construction: 2007, condition: good (used), machine/vehicle number: 073759001, Offer 22489 Technical data: - Cutting range at 90°: - Round: 320 mm - Flat: 320 x 320 mm - Material feed system - Saw band dimensions: 5095 x 34 x 1.1 mm - Cutting speed: 10 to 120 m/min - Hydraulic lifting and lowering of the saw frame - Upper stroke limit of the saw frame - Cutting pressure, infinitely adjustable - Hydraulic material clamping device - Chip conveyor - Coolant system - Chip removal conveyor: 2500 mm - Drive: 400 V / 4.0 kW - Space requirement: approx. W 2500 x H 1950 x D 2000 mm - Weight: approx. 2200 kg Rcjdpfxoim Ildo Af Asf

Condition: used, Year of construction: 1996, saw blade diameter 300 mm cutting diameter 100 mm capacity 45 degrees: flat 105 x 80 mm capacity 45 degrees: round 100 mm capacity 60 degrees: flat 80 x 70 mm capacity 60 degrees: round 90,0 mm dimensions of saw-blade 300 x 2,5 x 40 mm hole of sawblade 40,0 mm stroke 150 mm cutting speed 17 + 33 U/min voltage 400 V weight 340 kg range L-W-H 1000 x 800 x 1600 mm Features: - Machine cabinet with built-in coolant system - Vertical saw head guide - 2 speeds - Very large work surface and turntable - Mitre adjustment on both sides: 60° to the left / 45° to the right - Clamping vise with lateral quick-adjustment and double clamping arm - Precise prism guide for the gear head Rsdpfx Aszl E Twof Aocf - Operatorâ??s manual

Condition: new, Horizontal bending machine Fastech FP 40 Description • Pressing force: 40t • Stroke: 285mm • Max. tool height: 250mm • Flat bar over the top edge: 200 x 24mm • Working speed: 10.0mm/sec • Return speed: 10.0mm/sec • Working height: 930mm Rsdpfjfg Eu Rox Af Ascf • Table: 660 x 1250mm • Total power consumption: 4.0kW • Motor: 400 Volt 50Hz • Weight: 1100kg • Dimensions L-W-H: 1250 x 650 x 1250mm • Oil capacity: 40.0l Features: • Hydraulic horizontal bending machine • Solid work surface made of stabilized steel • Machine made of hardened and ground forged steel • Digital display for stroke adjustment • 1 x tool set • Double foot switch

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, overall weight: 580 kg, Precision aluminum circular saw machine Redpfx Afozpxh Nj Ajcf VELOX 350 VA-MPS Hydro-pneumatic fully automatic model For saw blades up to 350 mm in diameter, mitre cuts left and right 45° and bevel cuts up to 45° left. Cutting range: - 90° 120mm round, 105mm square, 200x80mm flat - 45° left 65mm round, 60mm square, 180x50mm flat - 45° right 115mm round, 100mm square, 150x80mm flat Standard features: • State-of-the-art micro-processor control with multi-function display • Safety package with the following functions: 1. Minimum inlet pressure monitoring 2. Clamping jaw monitoring/material tension • Hydro-pneumatic control of the saw head • Pneumatic double clamping device • Pneumatic vertical clamping device • Electro-pneumatic material feed unit • Vernier scale for fine length adjustment • Integrated coolant spray device • Connection nozzle for chip extraction system Speed 3600 min-1

Condition: new, Year of construction: 2024, saw blade diameter: 315 mm, cutting height (max.): 150 mm, cutting range round steel at 45°: 108 mm, cutting range round steel at 90°: 108 mm, rotational speed (min.): 17 rpm, rotational speed (max.): 33 rpm, BERG+SCHMID vertical circular saw model VKS 315 Speed: 17+33 rpm - Miter left 60° + right 45° - Clamping vice with double clamping arm (4-fold fixed) for low-burr cuts and quick lateral movement - Saw table with large turntable and particularly stable vice for optimum material clamping - Robust prismatic guide of the saw head (adjustable dovetail guide) - Automatic cooling system - Machine base frame with chip drawer - Metal handle for high clamping force Rcedpfx Aerrvn Ajf Asf - Counter holder with spring assembly a. Saw blade dimensions: 315x40mm Further accessories such as saw blades, roller conveyors, measuring stops, minimum quantity lubrication etc. available on request! Delivery time: ex stock Waiblingen Beinstein

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: GE-50RAY, input voltage: 230 V, type of input current: DC, laser power: 50 W, type of cooling: air, total width: 530 mm, total height: 770 mm, total length: 796 mm, overall weight: 254 kg, warranty duration: 36 months, height adjustment type: electric, door opening width: 530 mm, door opening height: 300 mm, table length: 203 mm, table width: 430 mm, laser wavelength: 1,064 nm, input frequency: 100 Hz, Equipment: cabin, Seize the opportunity and secure the 50 watt, 100 watt or 200 watt fiber laser! We will be happy to provide you with further information or an individual offer. Contact us today and find out more about the benefits of these outstanding products. We offer brand new fiber lasers with German user software and operating instructions. These devices are very easy to operate without any programming knowledge and are ready for immediate use. Our services: Personal delivery and installation Setup and instruction on site or via remote connection Ongoing support for questions or problems Service and spare parts directly from Germany Technical details (depending on model): Laser power: 50 watts, 100 watts or 200 watts Wavelength: 1064 nm Frequency range: 20-100 Hz Marking field size: 150x150 mm (options: 50, 70, 110 mm head) Repeat accuracy: ± 0.003 mm Engraving speed: ≤ 7000 mm/s Marking software: EZCAD in German / English Pilot laser: Simple preview Laser class: 1 Working temperature range: 14-30 ℃ Focusing: Electric lifting column with motor control Max. Component height: approx. 300 mm Connection: 230V Cooling: Air-cooled Weight: approx. 170 kg (depending on model) Operating costs: Low Service life: Over 100,000 operating hours maintenance-free Equipment: Grid holes for fixtures Variety of materials: Marking of a wide range of materials Included: Head 150x150 mm, other sizes available CE declaration of conformity guarantee service German software Training for machines and programs Invoice Scope of delivery: USB cable power cable Stops USB stick with parameters Operating instructions in German Foot pedal Safety goggles Applications: Perfectly suited for texts, logos, vector data, QR codes, DMC codes, 2D codes, variable data sets and image engraving. Our fiber lasers are ideal for engraving and tempering metals as well as marking or decorating plastics and coated materials. Software: EZCad 2.14.0 in German Rcedpfxsu Tkclj Af Aof Compatible files: *.DXF, *.PLT, *.AI, *.JPC, *.BMP, *.JPG, *.JPEG, *.GIF, *.TGA, *.PNG Service: We carry out the service ourselves and have the largest spare parts in stock right here in Germany to guarantee you fast and efficient support. Shipping and installation: With shipping, we connect the machine to you remotely, set it up and give you brief instructions. Alternatively, we deliver it in person, install it, set it up and instruct you. The price is agreed depending on the zip code. Consultation: For detailed advice, visit our website or call us directly. We will be happy to answer all your questions. Additional options: 100 watt and 200 watt models are also available on request - ideal for larger projects or higher power and speed requirements!

Condition: good (used), Year of construction: 2004, functionality: fully functional, Heavy-duty, fully hydraulic CNC bandsaw machine Rcjdjzl Ulpepfx Af Aef for automatic and economical cutting of solid and profile materials. Key features: - Cutting range: round 410 mm or flat 410 x 410 mm - Modern 2-axis CNC control - Bandsaw blade monitoring with automatic feed rate adjustment - Inching function for the first cut, 15 mm min. remaining piece length - Stepless, frequency-controlled saw drive - Clamping pressure adjustment for thin-walled tubes and profiles - Hydraulically driven chip conveyor - Automatic double-sided bandsaw blade lifting device - Hydraulic bandsaw blade tensioning - Material feed via precision ball screw and linear guide Drive power: 5.5 kW Working height: 730 mm Paint finish: plating gray RAL 7036 and turquoise RAL 5018 Includes 1 bi-metal bandsaw blade 6150 x 41 x 1.3 mm