Drilling machine

Blum Minipress MSP

Condition: used, Year of construction: 2009, Used machine Year of manufacture: 2013 Equipment and technical data: - Interchangeable drilling gearboxes for: - Line boring - Hinges - Mounting plates - Line boring gearbox can be used rotated 90° - Pneumatic hold-down device - Drilling gearbox system for quick change of vertical drilling modules - Vertical drilling gearbox: Motor power 1.6 kW - Vertical drilling gearbox: Speed approx. 2,780 rpm Lodpfx Abexwz Nxo Tehd - Power supply: 400 V, 3-phase, 50 Hz - Maximum drilling depth / Y adjustment: approx. 550 mm - Extraction connection: 100 mm Dimensions: approx. 940 x 1560 x 980 mm Weight: approx. 125 kg Availability: short-term Location: Röllbach

Condition: good (used), - power supply - 230 V - motor power - 0,92 kW, 1,25 HP - rotational speed - 2850 rpm - blade diameter - 250 mm - disc bore diameter - 30 mm - shield for the disc - cutting height - approx. 70 mm - cutting width - approx. 440 mm - arm length - approx. 660 mm - arm angle adjustment +/- 90° - blade angle adjustment 0°-90° Lhedpfx Aer A Anqeb Tod - arm height adjustment - blade adjustment in vertical axis +/- 90° NO DISCS FOR DISCS

Condition: ready for operation (used), Technical characteristics 45 ° right and left tilt useful arm length 440 mm right and left rotation machine on pedestal Power and Motors Lhjdpsuaihtofx Ab Tsd Voltage: 380 V Pluging: Three-phased Overall dimensions

Year of construction: 2025, condition: new, New machine Year of manufacture: 2025 Features and technical specifications: Fully equipped in standard version with: - Robust, torsion-free steel frame, welded and bolted construction - Lamella pressure beam TOP with 6 elements, lamella pressure beam SIDE with 5 elements - Lamella pressure beams with proven tolerance compensation system (Ganner system) for tightly compressed carcass joints - Counter-pressure surfaces (side pressure wall, base) are 38 mm thick, coated, continuous support plates - Continuous pressing surface, height 95 mm, on lower vertical pressure beam Lhodpfxew Nafks Ab Tsd - Electromechanical adjustment of both pressure beams via precision trapezoidal thread spindles (with increased lead and concentricity accuracy) and high-performance ball nuts with grease reservoir - The pressing process is carried out electromotorically, via 2 independent worm gear motors (2 x 0.75 kW) - Pressing force of the pressure beams is infinitely variable and electronically controlled by 2 potentiometers, regulated via frequency inverter, ensuring absolutely wear-free force control - Pressing force for horizontal pressure beam: min. 500 daN (kg), infinitely adjustable up to max. 2200 daN (kg) - Pressing force for vertical pressure beam: min. 300 daN (kg), infinitely adjustable up to max. 2200 daN (kg) - Pressing and adjustment speed of the beams with fine positioning, using 3-stage selector switch: 5 / 10 / 25 mm/second - Jog mode for precise positioning of both pressure beams, e.g. for low pressing forces, drawers, and carcasses at 45° - Simplest operation via 6 separate push buttons, 8 movement cycles selectable via control panel - Freely adjustable press time preselection 0-30 min (switchable to seconds or hours), with individually programmable opening dimensions for both pressure beams - Re-pressing function to increase or decrease the pressing force during the pressing process - Working height/loading height: 300 mm - Working dimensions: Length min: 150 mm, max: 2500 mm; Height min: 150 mm, max: 1400 mm; Depth: 700 mm Including surcharge for rapid traverse speed, for fast positioning of the pressure beams, controlled via automatic workpiece detection with sensors in the pressure beams, pressing speeds 5 / 10 / 25 mm/sec and rapid traverse speed 50 mm/sec, the sensors can be deactivated for pressing special components Including a set of machine feet for 500 mm working height Location: Flörsheim Availability: Short-term

Condition: ready for operation (used), Technical characteristics Drilling, hinge fitting and fixture fitting Head rotation for 3-spindle drilling Adjustment stop Vertical drilling unit with 7 spindles at 32 mm centres Pneumatic raising/lowering 0.75 kW (1 hp) motor Ledpfxjrfr Nfj Ab Tshd Pneumatic pressers Power and Motors Voltage: 380 V Pluging: Three-phased Power: 0,75 Kw Motor: 1 CV Overall dimensions

Condition: excellent (used), IM Very good condition. Lhodpfx Asvcyznsb Tod

Condition: used, Used machine Used Hettisch Blue Max hardware drilling machine Motor power: 0,8 kW Motor speed: 2800 rpm 4 drilling spindles with longitudinal stops Ljdpfxjw I Um Te Ab Tshd one foot switch press-in die missing!!! Availability: by arrangement Location: Solingen

Condition: excellent (used), functionality: fully functional, DeWalt 900 radial saw Specification: • condition - after inspection, fully functional • manufacturer - DeWalt • model - 900 • blade diameter max 350 mm • max dimensions of the cut element 110 x 900 mm (currently 750 mm) • cutting adjustment in three planes • extraction nozzle fi 50 mm • table top dimensions 140 x 110 cm Lhodpfewr Dyxjx Ab Tjd • overall dimensions - 150 x 140 x 160 cm (length x width x height) Additional information: • the machine is in very good technical condition, ready for immediate use • the photos shown show the actual condition of the item for sale • possibility of switching on and checking the device on site