Belt straightener

BSA Richtmaschine

Condition: new, Year of construction: 2025, Technical Data / Equipment Straightener: R65/360 • Strip width 30 - 360 mm Iedpfowhfxzox Ab Tehw • Strip thickness from-to 0.6 - 4.0 mm • Strip thickness throughput: max. 4.00 mm • Max. straightening cross-section: 800 mm2 at R02=350 Nmm2 or 150 x 4 mm • Straightening speed: 2 - 20 m/min • Number of straightening rollers: 7 • Straightening roller diameter: 65 mm • Number of draw rollers: 2 • Draw roller diameter: 65 mm • Motor power: 2.2 kW/3x400V RK machine body with a very stable and torsion-free welded construction RZ straightening and draw rollers, made of high-quality steel, surface-hardened and finely ground mounted in maintenance-free roller bearings AG drive, via spur gear motor with Double chain drive EM self-regulating drive, via frequency converter, with WM position measuring system, belt loop control for self-regulating drive, with ultrasonic sensor and sensor in the belt loop RZ straightening roller adjustment, individually manually adjustable and readable via dial gauges RO discharge roller cage, fixed with a radius for 3 mm material thickness PZ pneumatic tension roller adjustment, operated from the control panel BSF-ze belt side guide, manually adjustable centrically and eccentrically by 25 mm SS-2 interface to the press:

Condition: like new (used), Year of construction: 2014, operating hours: 15,000 h, Atlas Copco compressor stage after refurbishment. Iedjmzbdwopfx Ab Tehw

Condition: as good as new (ex-display), Year of construction: 2021, machine/vehicle number: 06 61 218, Comm. no.: Lg 32821 Single side decoiler BBT ABH 2000/400 exhibition machine, unused machine no.: 06 62 218 year of manufacture: 2021 Technical data load capacity approx. max. 2.000 kg strip width max. 400 mm Coil inner diameter approx. 450 to 520 mm Coil outer diameter max. 1,500 mm Unwinding speed approx. 2 to 15 min.-1 With adjustable drive and loop control via ultrasonic sensor (analog). Drive by frequency-controlled three-phase geared motor. Spreading of the support segments manually by means of hand crank via joints Number of supporting segments 3 Coil side guide via strong limiting arms, clampable. Reel stand in strong box construction as welded design. construction. Additional equipment: Shutdown "belt loop too small" by antenna switch, attached to the column of the bottom housing of the loop control. Infinitely adjustable in height. Ihsdpog U Utvefx Ab Tsw Tape side guide at the bottom housing of the loop control, by means of lateral guide rods. The passage width is continuously adjustable.

Condition: ready for operation (used), Year of construction: 2016, Control Unit Brand OKUMA Model OSP-P300S-H Movement Y-Axis Movement 160 Ihsdpfex D R Uwjx Ab Tjw Additional Equipment Y-Axis Machining Kit: Helical interpolation /Y-axis turning function with offset turning toolholders/ Coordinate conversion /Double pressure clamping system for main spindle chuck via M-codes (irreversible) /Double pressure clamping system for sub-spindle chuck via M-codes (irreversible) 60 tool ATC / High-pressure coolant preparation: 70 bar/ External coolant pump: 0.8 kW, 6 bar, 20 L/min/ Electric spindle orientation /Air blast for chuck cleaning Collision Avoidance System (CAS)/Chip Conveyor Preparation/Big Bore Spindle ASA 6": 22/15 kW, 3800 rpm/ High-precision C-axis positioning/ Continuous B-axis/ Tool Magazine with 60 positions/ 0.1 Micron Resolution Software/ API Library 2 for OSP-P300S/ Standard Right Side Chip Conveyor/ 15 Bar Coolant Pump 20 L/min/ Filtration unit with 4 fabric filter bags (25 micron), pump 15 bar, 20 L/min SCHUNK ROTA THW+260-81R A8 chuck with KITAGAWA SS1770 cylinder for Big Bore main spindle SCHUNK ROTA THW+215-66 A6 chuck with KITAGAWA SS1452 cylinder for sub-spindle 5-Axis Machining Kit: Super NURBS on 5 axes /Vector control /DNC-DT interface /Tool position control/ 3D coordinate transformation /Helical interpolation (includes inclined plane profile software) This 5-axis OKUMA MULTUS B300 II W was manufactured in 2016. It features an ASA 8 spindle offering 5,000 rpm and 65 mm bar capacity, capable of handling a max turning diameter of 630 mm. It includes a high-pressure coolant preparation of 70 bar, a continuous B-axis with HSK63, and a tool magazine with 60 positions, optimizing both turning and milling capabilities. If you are looking for high-quality turn-mill operations, consider this OKUMA machine. Contact us for more information about this machine. Application Types Turning

Condition: new, Year of construction: 2026, Recirculating Chamber Furnace, electric, new unit, delivery time 12 weeks - Maximum temperature: 250°C - Internal dimensions (W x D x H): 2100 x 2100 x 2000 mm - Volume: 8,820 liters - Control: Eurotherm Nanodac Controller/recorder with color touchscreen display - 2 pcs. recirculation fans - Double doors with safety door sensors - Overtemperature protection: Eurotherm 3216i - 2 pcs. fresh air fans - Automatic dampers - Electrical design: 400 V / 50 Hz / 3NPE Ihsdpfxjv Hg Euo Ab Tjw - Increased heating capacity approx. 70 kW - Temperature accuracy: +/- 6 K in an empty oven - Documentation, CE certificate of conformity - Electrical circuit diagram with spare parts list Note: The oven floor is not insulated but fitted with stainless steel sheet. This allows unrestricted entry for all track widths. Alternatively, an insulated floor can be offered (with customer-defined entry rails). We offer new and used industrial furnaces, which we can also retrofit and upgrade according to customer requirements. Furnace, ovens, drying oven, industrial oven, drying cabinet, heat oven, heat cabinet, recirculating oven, chamber furnace, heating oven, chamber recirculation oven, tempering oven, annealing oven, temper oven, annealing oven.

Condition: used, Year of construction: 2022, Technical details: cutting diameter: 128 mm saw band length: 1640 x 13 mm saw band width: 0,64 mm cutting range 90 degrees: round: 128 mm cutting range 90 degrees: flat: 100 x 150 mm cutting range 45 degrees: round: 90 mm cutting range 45 degrees: square: 90 x 75 mm band speed: 24 - 35 - 55 m/min Ihsdpfx Aeu Nig Rob Tow electrical connection: 220 V / Hz. total power requirement: 500 Watt machine weight approx.: 80 kg dimension machine xH: 0,95 x 0,52 x 1,1 m The machine is unused-new, in the original box. The band saw can be moved manually. Application for steel, cast iron and non-ferrous metals. Workpiece clamping by means of clamping jaws by hand wheel, 1x fixed and once movable, clamping range 165mm, swivel range 60°. limit stop for length adjustment max. 85mm i.D. *

Condition: excellent (used), 3-phase direct current spot welding machine DALEX type PMS 11-4 G 3 Rated power at 50 % ED: 96 kVA Sec. short-circuit current: 44.5 kA Sec. open-circuit voltage: 4.72 V Electrode force: 100-600 daN arm reach: 550 mm Ihedpshmvawefx Ab Tjw with add-on control cabinet according to VDE 0100 Main switch Synchronous welding control 8033 weight: 740 kg

Condition: like new (used), Year of construction: 2022, functionality: fully functional, load capacity: 1,500 kg, The Siegmund M positioner is ideal for welding, assembly and maintenance work. Positioning is carried out using a manually driven handwheel. Positioner with load capacities of up to 1,500 kg. Torque 900 Nm Handwheel with handle Ø 315 mm U-angle compatibility System 28 Max. length of U-angle Ihjdjvlgzaopfx Ab Tsw 3,000 mm A - Working height 850 mm B - Column height 955 mm C - Total height 1,140 mm D - Width of base plate 600 mm E - Length of base plate 600 mm Price does not include 3D accessories. Prices 3-D accessories, heavy cast parts, wall thickness 28mm, everything processed, special prices New: original angle 28 U-shape 500mm x 200mm x 200mm (surcharge 500.-€) or 2000mm x 200mm x 200mm (surcharge approx. 1000.-€) or 2400mm x 200mm x 200mm (surcharge 1300.-€) or with table top 28 hole, 2000mm x 1000mm x 200mm (surcharge 2000.-€) several positioners are available

Year of construction: 1980, condition: good (used), 17 rolls, Ø 90 mm Ihodpfsdnzvdsx Ab Tsw strip width: 50 - 200 (250) mm strip thickness: 2 - 10 mm

Condition: used, Year of construction: 1984, material width:350 mm coil weight:1 t material thickness:0,5 - 6 mm coil internal diameter:380 - 540 mm coil external diameter:1500 mm no. of straightening rolls:9 straightening roll diameter:30 mm number of draw-in rolls:2 Ihedpfx Abjt Hmk Ts Tsw weight of straightening machine:2 t dimensions straightener (WxDxH):2,0 x 2,0 x 1,9 mm weight of decoiler:1,3 t dimensions decoiler (WxDxH):1,7 x 1,5 x 1,6 m