Used lowboy semi-trailers / low loaders for sale (269)

Condition: used, maximum load weight: 26,240 kg, overall weight: 36,000 kg, axle configuration: 2 axles, first registration: 10/2008, loading space length: 10,819 mm, Equipment: ABS, Manufacturer B-XL Model 4.5 m. 2 axle extension Year 2008 Condition Good Serial Number WKVDAS00200021091 Ref. nr. 7721 Reg. date: 27-10-2008 Drum brake: ? Knodpfx Agovl Dkrezjf ABS: ? Rear axles: SAF Suspension: Air Tire Size: 245 / 70R17,5 Cover% left 40 - 40% Total weight: 36000 kg. Net weight: 9760 kg. Steering rearaxle:?

Condition: used, overall weight: 30,000 kg, axle configuration: 2 axles, first registration: 01/2015, loading space length: 13,590 mm, loading space width: 2,500 mm, loading space height: 1,820 mm, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, Burgers Double Deck Trailer – 2-axle, steered, NEW Up to 60% more loading area – saves trips & costs! Eco-friendly: 40% less CO₂ emissions Often, ROI within just 1 year — Technical Overview: * Chassis: 2 axles, steered, TRIDEC mechanical steering (no electronics) * Gross weight: 30 t (12 t fifth wheel load + 18 t axle load) * Tires: 4× Goodyear 385/65 R22.5 * External dimensions: 13,820 × 2,550 × 4,045 mm * Upper deck internal dimensions: 13.59 × 2.5 × 1.82 m * Lower deck internal dimensions: 9.94 × 2.5 × 1.82 m * Lower deck floor height from the ground: 320 mm * Axle spacing: 1,400 mm — Body & Materials: * Plywood side/front wall: 21/24 mm, white polyester-coated * 30 mm insulated polyester roof with rainwater drainage * Non-slip aluminium floors (grey) * Stainless steel front/corner profiles * Fully hot-dip galvanized chassis to ZINQ standard Knedpfx Ajxitbqjgzof — Safety & Handling: * WABCO air brake system, drum brakes, ABS/EBS-E with ECAS * Visible control lights (ABS/EBS/ECAS) * WABCO Smartboard: weight display, odometer, adjustable loading heights — Comfort & Operation: * 3 large side access hatches (battery, lift/smartboard, technical compartment) * Multi-deck lift by Dhollandia, 2,500 kg load capacity, LED platform, foldable rails/ramps * Lift controls: external right side, integrated into rail — Electrics & Lighting: * Full LED interior & exterior lighting, LED work lights/platform lighting * 2× 230 Ah batteries, charged via the tractor unit * Main switch behind side hatch, linked to lift control — Finish & Advertising: * Exterior finish: RAL 1003 yellow (including stainless steel front/rear & wheel arches) * Reflectors: 3M (white side, red rear) * Optional: advertising spaces available — Key Advantages at a Glance: * Replaces up to 3 standard trailers with just 2 double deck trailers * Customizable: axles, dimensions, cooling options configurable * Suitable for long-distance and distribution transport * 1-year warranty (covering ramps, tires, steering, paint, and more) — Contact us now & sustainably increase your capacity!

Condition: used, overall weight: 34,500 kg, axle configuration: 2 axles, first registration: 06/1991, next inspection (TÜV): 06/1991, loading space length: 7,300 mm, loading space width: 2,500 mm, * Goldhofer 2-axle * Water tank * Storage box * Hydraulic ramps * BPW axles * Year of manufacture: 1991 ----Internal vehicle number: 11542-----Errors and prior sale reserved Knedpfx Agexx Hgxozof

Condition: new, empty load weight: 10,400 kg, maximum load weight: 45,600 kg, overall weight: 56,000 kg, axle configuration: 3 axles, loading space length: 8,600 mm, loading space width: 2,550 mm, loading space height: 1,000 mm, suspension: air, tire size: 235/75R17.5, color: green, Year of construction: 2021, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, 3 axles, air suspension, ABS (anti-lock braking system), extendable to 3m, hydraulic ramps, rear supports, landing legs. Body: 3-axle low-loader trailer with hydraulic loading ramps. New vehicle from stock! 3 x 12t axles, drum brakes, loading height approx. 1030mm, extendable to 3m, hydraulic ramps driven by their own electric pump! Length over gooseneck approx. 4m, low bed length approx. 8.6m! New vehicle from stock! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to change, prior sale and errors reserved! Knsdpfxjw Rf N Ds Agzsf

Condition: used, empty load weight: 11,140 kg, maximum load weight: 33,860 kg, overall weight: 45,000 kg, first registration: 10/2025, next inspection (TÜV): 10/2026, loading space length: 9,000 mm, loading space width: 2,550 mm, loading space height: 920 mm, loading space volume: 21 m³, suspension: air, wheelbase: 1,310 mm, color: grey, Year of construction: 2025, gearing type: other, rear tire size: 235/75 R 17.5, driver cabin: other, emission class: none, 3-axle low-bed semi-trailer with wheel loader recesses and hydraulic steering, maneuvering steering with radio remote control, hydraulic rear supports with radio control, electrohydraulic pump unit, extensions up to 3,000 mm. * 2 aluminium ramps to the platform * 4 extendable warning boards with lighting * 4 wheel loader recesses with cover * Support device * Steering knuckles on 2nd and 3rd axles * Excavator recess 1,250 x 700 x 505 mm * Control box for air suspension * Permissible fifth wheel height 1,220 mm * ECAS * Electrohydraulic pump unit without batteries * 2'' king pin * Double loading ramp * LED reversing lights * Hydraulic steering axle * Double steering axle * Single lift axle Knedpfx Asxxqmiegzsf * Platform side walls * Wheel loader recesses * Hydraulic ramp lift * Hydraulically adjustable ramps * Beacon * Reversing lights * Smart Board * Supports * Drum brake * Warning package * Central lubrication system Vogel

Condition: new, maximum load weight: 25,300 kg, overall weight: 38,000 kg, axle configuration: 2 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available immediately or at short notice, on our website. Excerpt from the equipment details. Full specifications available upon request. Neck (Gooseneck) * Gooseneck in SNT design to optimize loading platform length * Approx. 3,750 mm long, hydraulically liftable/lowerable and detachable * Technical fifth wheel load: 25,000 kg For tractors: 4x2 and 6x2 Kessel Bridge (Tiefbett section) * Low bed designed as extendable Kessel bridge in SUPER LOW design * Approx. 6,850 mm length * With mechanical locking * Service lines routed protected inside the extendable beams, automatically adjusting to match the low bed’s length Rear Chassis * Short version with closed outer frame and checker plate cover * Chassis with excavator trough, closed at the rear half to accommodate air tanks Axles * BPW axles and suspension, all axles hydro-mechanically forced steered * Technical axle load: 12,000 kg per axle * Air suspension with lifting and lowering valve Tires * GOODYEAR KMAX T 3PMSF (M+S) 245/70 R 17.5 twin tires. Load index 143/141J (146/146F) Brake system * Brand: WABCO, EBS-E according to EU regulations, without connection cable to the tractor unit Paintwork * 6-Coat final treatment * All-steel construction shot-blasted after welding * 1 layer of zinc-based primer * 1 layer of adhesion primer. Final coating with 2 coats of 2-component acrylic paint in a single color, followed by cavity sealing with special wax Trailer color * RAL 3002 Carmine Red * Rim color: Silver grey * Drop side color: Natural aluminum Accessories included * Removable steel front wall, approx. 400 mm high * 3 kW electro-hydraulic unit for hydraulic operations (except for hydraulic winches). Without supply connection installed on tractor unit * Spare wheel carrier in front of the gooseneck front wall * Side beams of the gooseneck with fixing holes for bolted lashing rings; first hole approx. 200 mm from the front, then at approx. every 400 mm * 2 pairs of screw-in lashing rings included (LC 5,000 daN) * 1 lashing ring each left and right on the rear taper of the gooseneck (LC 6,000 daN) * 2" king pin * Hydraulic cross member for supporting the gooseneck on the tractor unit or a dolly * Air connection with air gun at the gooseneck * 1 pair of steel ramps with climbing strips and securing pins to bridge the mountings of the low bed * 1 lashing ring each left and right on the front cross member (LC 10,000 daN) * Outer side beams of the loading area prepared for removable loading floor Knodpfx Agov Sw E Ajzof * Lashing rings with retaining spring at approx. every 1,200–1,300 mm on the inside carrier’s exterior of the loading area * Lashing rings with retaining spring at approx. every 1,200–1,300 mm on the outer carrier’s exterior of the loading area (LC 10,000 daN) * Cut-outs above the lashing rings in the outer carrier’s upper flange * Mechanical pin-tab coupling from low bed to rear chassis, for swapping the loading floor or installing extension beams, with electro-pneumatic-hydraulic couplings * The outer carriers of the low bed coated with anti-slip sand finish for slip resistance * 2nd ride height for high ride position, max. ± 50 mm from normal ride position, without installation of controls from the tractor unit * 1 pair lashing rings with retaining spring at the transition from the low bed to the excavator trough (LC 10,000 daN) * Front and rear tapers

Condition: used, maximum load weight: 34,400 kg, overall weight: 57,000 kg, axle configuration: > 3 axles, first registration: 06/2006, total width: 2,750 mm, total height: 3,900 mm, Equipment: ABS, Faymonville 4-axle lowbed trailer with detachable S-neck, extendable and with 4 steering axles Payload: 34,400 kg Ksdpfx Aswuhm Iogzenf Type: STBZ-4WAUB Year of manufacture: 2006 - Extendable up to a total length of 26 meters - With hydraulic ramps - 4 steering axles with remote control We are also happy to support you with financing/leasing through our partners. All information provided without guarantee. Subject to errors and prior sale.

Condition: used, maximum load weight: 32,000 kg, overall weight: 31,500 kg, axle configuration: 2 axles, first registration: 06/2002, loading space length: 12,500 mm, loading space width: 2,480 mm, loading space height: 3,050 mm, Equipment: ABS, Very nice and good 2-axle semi-trailer with Dhollandia heavy-duty tail lift. Knsdpfx Agsxplqqjzef

Condition: used, empty load weight: 9,480 kg, maximum load weight: 31,520 kg, first registration: 03/2020, next inspection (TÜV): 04/2024, total length: 11,500 mm, total width: 25,500 mm, total height: 38,000 mm, suspension: air, tire size: 245/70 R 17.5/10mm, wheelbase: 1,800 mm, front tire size: 245/70 R 17.5/10mm, operation weight: 41,000 kg,

Condition: used, empty load weight: 18,240 kg, maximum load weight: 45,760 kg, overall weight: 64,000 kg, axle configuration: > 3 axles, first registration: 02/2012, next inspection (TÜV): 01/2024, loading space length: 12,120 mm, loading space width: 2,740 mm, loading space height: 550 mm, tire size: 285/70R19.5, color: red, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, 4-axle, SAF axles, forced steering, lifting+lowering, ABS (anti-lock braking system), lashing eyes Body: Low-bed semi-trailer with 3 hydraulically steered axles & jeep dolly. Including jeep dolly with 10t SAF axle & tires 295/80R22.5! Rear 3x 12t SAF axles! Widenable to 3.2m, 8m in drop deck! With radio and cable remote control, automatic tracking. Knjdpfxjndh Umo Agzsf A construction description is available and can be sent on request! ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! - .

Condition: used, maximum load weight: 175,620 kg, overall weight: 219,000 kg, axle configuration: > 3 axles, first registration: 01/2002, Equipment: ABS, STHP 8 (3+5) 8-piece hydraulic swing BPW axle unit with remote control. Technically permissible total weight: 219,000 kg Payload: 175,620 kg Hydraulically suspended and 8-axle steerable Goldhofer low bed trailer, type STHP (3+5), comprising 4 heavy-duty modules with a detachable gooseneck, up to 5 m long telescopic excavator low bed with 4 wheel recesses, ABS, and technical payload up to 175,620 kg. Consisting of the following four separate heavy-duty modules: 1st Module: Hydraulic universal gooseneck, type STH - Can be combined with heavy-duty dolly modules and overdrive loading bridges - Unladen weight: 5,900 kg - Permissible front fifth wheel load: 35,000 kg - Length: approx. 4.10 m - Saddle height: approx. 1.30 m - King pin: 3.5" - Plug-in aluminum side walls - Fully hydraulically movable 2nd Module: Goldhofer THP/ST3 3-axle heavy-duty chassis module - Permissible total weight (as a single module): 108,000 kg - Permissible axle load: 36,000 kg at 5 km/h - Unladen weight: 10,350 kg - Technical payload (as a single module): up to 97,650 kg at 5 km/h - 8 hydraulic pendulum axles, tires: 215/75/R17.5 - Axle load: 25 t at 20 km/h - Vehicle width: 3 m - Axle spacing: 1.5 m - Max. steering angle: ±60° - Hydro-mechanical 2-circuit forced all-wheel steering integrated in chassis, max. axle steering angle: 60°, with integrated hydraulic oil tank - Front/rear optimized pin-plate coupling for longitudinal configurations - Single-wheel pendulum axle assemblies, total 8 wheels per axle line - Hydraulic axle compensation +/- 300 mm, hydropneumatic gas pressure accumulator suspension - Hydraulic steering for all axles - BPW axles with drum brake incl. ABS, technical axle load 34 t at 5 km/h 3rd Module: Low bed heavy-duty module, extendable - excavator bridge - Year of manufacture: 2002 - Internal dimensions: approx. 7.50 m length, 3.00 m width, loading height 0.40 m - Construction height: 350 mm - Extendable by approx. 5.00 m - Unladen weight: 11,900 kg - 4 wheel recesses, extension module in the front area - Overall height in wheel recess area: approx. 150 mm - Loadable up to 80 t in the low bed and 175.6 t in the complete module combination STHP 8 (3+5) - Front and rear hydraulic bolt plate coupling with claw coupling adapter 4th Module: Goldhofer THP/ET5 5-axle heavy-duty chassis module - First registration: 04.01.2002 - Permissible total weight: 115,000 kg - Permissible axle load: 23,000 kg at 5 km/h - Unladen weight: approx. 14,200 kg - Technical payload: up to 100,800 kg - Single-wheel hydraulic pendulum axles with 4 wheels per axle line, 20 x 285/70 R 19.5 tires - Hydraulic axle compensation +/- 300 mm, hydropneumatic gas pressure accumulator suspension - Hydraulic steering for all axles - Radio remote control for steering axles 5. Notes: The 4 heavy-duty modules allow for up to 3 different train combinations! Payloads vary depending on combination. The low bed can be inspected and demonstrated at our site. A current manufacturer's certificate from Goldhofer is available for this special low bed combination. Price NET plus 19% VAT. All information subject to change and prior sale. Internal vehicle number: 2285 Kjdpfx Agjxx Evfezjnf Advert also available in full German / Inserat auch komplett in Deutsch verfügbar

Condition: used, empty load weight: 12,640 kg, maximum load weight: 28,360 kg, overall weight: 41,000 kg, first registration: 06/2023, next inspection (TÜV): 06/2026, loading space length: 9,900 mm, loading space width: 2,550 mm, loading space height: 910 mm, loading space volume: 22 m³, suspension: air, tire size: 235/75 R 17.5, color: other, gearing type: other, front tire size: 235/75 R 17.5, driver cabin: other, emission class: none, Available immediately for rental periods of 4 weeks or more - Contact O. Schinke o. Platform length 3,800 mm, loading length 9,400 mm, loading width 2,550 mm, ramp incline 1,300 mm, Rear loading ramps 2,950 x 1,700 x 900 mm ramp angle approx. 11 degrees, hydraulic ramp jack, ramp hydraulically movable, Grease aid, smart board, loading bed extension, Spare wheel holder, including spare wheel, storage box, 1 support at the front: telescopic support aluminum leg for uncoupling, 2 foldable support legs at the rear with spring holder, To operate the hydraulic components, a corresponding truck hydraulic system with forward and reverse air is required (not included in delivery) Knodpfoxwk Evex Agzsf also available as a rental vehicle in the long term! Contact us - we will make you our individual offer.   * ABS * Steering knuckle on the 2nd and 3rd axle * Side impact protection * Rubber-metal pads on the loading ramps * Plastic tool box * Single lift axle * Platform side walls * Hydraulic ramp jack * Hydraulically movable ramps * Spare wheel holder * Rotating beacon * SAF axles * Smart board * Supports * Warning package * Central lubrication system We expressly reserve the right to sell the item prior to sale, as we also offer this item on other portals. Information about accessories is provided without guarantee, subject to changes, prior sale or errors. We offer and strongly recommend an inspection and test so that the buyer does not have any false ideas about the condition and suitability. Inspections and tests are possible at any time by appointment and are expressly desired.   We take care of all formalities and hand over the vehicle with the desired transfer license plates for an additional charge. Some of the images have been edited and are for initial viewing only. If you are interested, please contact us and request current images.

Condition: new, maximum load weight: 48,180 kg, overall weight: 70,700 kg, axle configuration: > 3 axles, total width: 2,750 mm, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available immediately and at short notice, on our website. Excerpt from the equipment features. Full equipment list available on request. Kjdpfxewx Ddws Agzjnf GOOSENECK * Gooseneck with integrated single-axle chassis (pendle axle) in removable design * Gooseneck hydraulically height-adjustable, including hydraulic connection linked to the hydraulic axle compensation for the front axles * Length: approx. 5,200 mm, with front taper approx. 60° * Suitable for tractors: 6 x 4 or 8 x 4 * Plug-in steel front wall, approx. 400 mm high, in angled design * 1 pair of mechanical support legs at the front of the gooseneck, foldable (LC 10,000 daN) * 1 pair of plug-in aluminium side boards, approx. 400 mm high, anodized finish * 1 plug-in aluminium rear board, approx. 400 mm high, anodized finish * Checker plate covering above the gooseneck * 3.5-inch kingpin * Round NATO socket on the front connection bar (Maeler & Kaege VG 96 917) * 1 INOX tool box with single lid, bolted to the right side of gooseneck in the direction of travel, by the ALU sideboard, approx. 1,350 x 400 x 400 mm (L x W x H) * Hydraulic connections from the gooseneck to the low-bed with multi-coupling * 1 LED work light each on the left and right on the rear cross member of the gooseneck, wired to the connection bar for the tractor unit LOAD DECK * Low-bed with external beams, designed as telescopic load deck in low-profile construction with front extension, including fixed approx. 50 mm hardwood floor, length x width approx. 8,000 mm x 2,740 mm * One locking point approx. every 1,000 mm on the extension * Fixed drive-on ramps at the front of the loading platform with climbing strips * 1 lashing ring on the outside of the fixed drive-on ramp (LC 10,000 daN) * 1 lashing ring suspended on the outside on each left and right at the front cross member (LC 10,000 daN) * Lashing rings with retaining spring approx. every 1,200–1,300 mm on the inside beams of the low-bed * Lashing rings with retaining spring approx. every 1,200–1,300 mm on the outside beams of the low-bed (LC 10,000 daN) * Recesses above lashing rings in the upper flange of the outside beams * Mechanical pin-lug coupling from the low-bed to the chassis to change the load deck or install extension beams, with electro-pneumatic-hydraulic couplings * The outside beams of the low-bed with a painted-on sand layer for anti-slip protection * 4 pairs of recessed lashing rings lying in the load deck, distributed along the outer frame/outside beam (LC 10,000 daN) * 1 lashing ring outside each on the left and right on the rear cross member (LC 10,000 daN) * Fold-out deck wideners, approx. 230 mm per side * Loose widening planks, steel-edged * 6 pairs of threaded blocks between the lashing rings under the upper flange on the outside beam, for mounting bolted rings M24 (LC 8,000 daN) * 2 pairs of M24 bolted rings (LC 8,000 daN) included REAR CHASSIS * Rear chassis with closed outer frame, checker plate covering and continuous prism excavator trough, approx. 1,450 x 900 x 505 mm, open at the rear PENDLE AXLE * All axles hydro-mechanically forced steering * Burst hose valve on the axle compensation cylinders with automatic RESET function * Hydraulic cylinders with shut-off valves and pre-fittings to secure in raised position * Final painting of axles with 2 layers of 2-component paint, solid color in DB 7350 Novagrau * Hydraulic axle compensation * Tires 245/70 R 17.5 3PMSF * Suspension bar

Condition: new, maximum load weight: 31,500 kg, overall weight: 42,000 kg, axle configuration: 3 axles, Year of construction: 2025, Equipment: ABS, Wiese 3-axle semi-trailer with lift table and fold-down rear. Ideal for transporting forklift trucks and/or work platforms. Kedpfxevw Hmtj Agzenf Technical data. 3 x 10 to. axles Lift axle Steering axle Smart Steering (steers forwards and backwards) Outer beam chassis with slope 18-tonne neck design suitable for 2- and 3-axle semitrailer tractors Lifting table hydraulically movable in 3 positions Rear in folding rear design incl. hydraulic extensions, can be used as drive-on ramps, drive-over ramps or as a loading area (overall length reduction when rear is raised) Remote control for ramps and lift table Front wall Grid floor Numerous lashing points SmartBoard Central lubrication system Spray-galvanized and painted steel construction Numerous optional extras are available: e.g: Cable winch Storage box on the saddle step aluminum rims Further information on request.

Condition: used, empty load weight: 23,620 kg, maximum load weight: 73,580 kg, first registration: 05/2009, next inspection (TÜV): 01/2024, total length: 14 mm, total width: 25,500 mm, total height: 9,000 mm, suspension: steel-air, tire size: 245/70 R 17.5 /10mm, wheelbase: 1,300 mm, mileage: 242,697 km, front tire size: 245/70 R 17.5 /10mm, operation weight: 97,200 kg,

Condition: used, empty load weight: 9,600 kg, maximum load weight: 30,400 kg, overall weight: 40,000 kg, axle configuration: > 3 axles, first registration: 12/2011, loading space length: 13,200 mm, loading space width: 2,500 mm, loading space height: 800 mm, suspension: air, tire size: 205/65R17.5, color: green, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, 4 axles, SAF axles, air suspension, lifting and lowering function, 3rd and 4th axles self-steering, ABS (anti-lock braking system), extendable, lashing eyes, drive-on ramps can be fitted, front support legs, rear support legs, lateral aluminium side guard, storage box. Knjdjxxkqzspfx Agzof Body: 4-axle low-bed semi-trailer with attachable drive-on ramps, SAF axles, 3rd and 4th axles self-steering, 13 pairs of lashing rings, 10 pairs of preparations for plug-in stanchions, 13,200 mm loading length fully retracted, 16,800 mm loading length fully extended, 800 mm loading height in the low-bed area, low-bed length approx. 9,500 mm retracted, next technical inspection (TÜV) due, aluminium ramps available at extra cost of €1,500. ACCESSORY DETAILS WITHOUT GUARANTEE, subject to change, prior sale and errors excepted. - .

Condition: new, suspension: other, color: other, gearing type: other, driver cabin: other, emission class: none, fuel: biodiesel, Storage compartment for aluminum ramps, price per storage compartment, length approx. 2.48 m, width approx. 1 m, height approx. 27 cm, , --  Misprints, errors and changes reserved, sample images --, More information at: !, More details: ! Kodpfxsxnx Rns Agzsnf

Condition: used, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 06/2021, next inspection (TÜV): 02/2025, loading space length: 7,000 mm, loading space width: 2,530 mm, Equipment: ABS, * 2-axle VEGA * Loading ramp * Air suspension * Tyres: 205/65R17.5 * Trax axles * Unladen weight 5750 kg Kedexu Ti Espfx Agzsnf ----Internal vehicle number: 11502-----Subject to errors & prior sale

Condition: new, maximum load weight: 73,090 kg, overall weight: 102,000 kg, axle configuration: > 3 axles, Equipment: ABS, You can find our complete range of vehicles, including those available immediately or at short notice, on our website. The following is an excerpt from the equipment list; the full specification is available upon request. Gooseneck: * Gooseneck hydraulically liftable/lowerable and detachable * Length approx. 3,650 mm. For tractor units: 6 x 4 or 8 x 4 2-Axle Compact Front Bogie: * Hook mounts front and rear. Length: approx. 2,200 mm * Chassis width: approx. 2,850 mm Lowbed: * ATX-A lowbed with telescopic longitudinal beams in low-profile design, with fixed hardwood flooring, approx. 50 mm thick * With drive-over bridge hooks at the front and bolt-on/lug coupling at the rear * Base width: approx. 2,850 mm * Length: approx. 7,150 mm * Beam height: approx. 300 mm * Beam width: approx. 650 mm * Loading height approx. 450 mm, ground clearance approx. 150 mm 4-Axle Rear Bogie: * Mechanical pin/lug coupling for attaching a lowbed at the front * Rear closing cross-member * Chassis width: approx. 2,850 mm * Chassis length: approx. 5,480 mm 2-Axle Front Bogie: * Pendulum axles, all axles hydro-mechanically forced-steered * Hose rupture valve on the axle compensation cylinder with automatic reset function * Hydraulic cylinders with shut-off valves and locking pins for securing in raised position * Axles finished with 2 coats of 2-component paint in MB7350 Novagrau * Technical axle load: approx. 14,640 kg (62 km/h) * Hydraulic axle compensation 4-Axle Rear Bogie: * Pendulum axles, all axles hydro-mechanically forced-steered * Hose rupture valve on the axle compensation cylinder with automatic reset function * Hydraulic cylinders with shut-off valves and locking pins for securing in raised position * Axles finished with 2 coats of 2-component paint in MB7350 Novagrau * Technical axle load: 14,640 kg (62 km/h) * Hydraulic axle compensation Tyres: * Tyres according to manufacturer’s choice (M+S) 285/70 R19.5 * Load index 150/148J Paintwork: * Entire steel structure is automatically blast-cleaned after welding using a turbine blasting system * Second round of blasting with corundum for optimal coating adhesion * HRM-metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc / 15% aluminium) * Final coat with 2 layers of 2-component topcoat, single colour in RAL 3002 Carmine Red, corresponding to RAL system 841GL Including the following accessories: * Steel front wall, approx. 400 mm high * Plug-in aluminium side and rear walls for the gooseneck, approx. 400 mm high * 3.5-inch king pin * Truck hydraulic connection with flow regulator (20 l/min), incl. gallows for supply line suspension * The tank of the tractor unit must have a minimum capacity of 80 l * With MAX Trailer couplings; otherwise, couplings to be supplied by the customer ex works * BEKA-MAX central lubrication for one gooseneck with standard grease NLGI-2 Kodpexbv Aujfx Agzenf * Multi-coupling hydraulic connectors on the gooseneck * Front bogie with separate air connection for pneumatic tools * BEKA-MAX central lubrication for a 2-axle bogie with standard grease NLGI-2 * Prepared for receiving bolt-on container positioning for 1 x 20' or 1 x 30' containers on outer beams * Without container locks * Mounts on the outer beams of the loading area for installing folding marker extensions * BEKA-MAX central lubrication for a 4-axle bogie with standard grease NLGI-2 * Rear bogie equipped with a socket for remote cable steering * Rear bogie with trough * One LED beacon with mounts on the left and ri

Condition: used, maximum load weight: 25,750 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 08/2020, loading space length: 13,620 mm, loading space width: 2,480 mm, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, Vehicle Type: Wiese Forklift Transporter with curtain-side body, lifting roof, and trailing steering axle. Kjdpfxjxmudzj Agzjnf * Model: SA 3-36 SK Fifth Wheel Height: 960 mm Body: Curtainsider version with sliding curtains on both sides * Extended tarpaulin version * Sliding roof * Ice-Protect * Tarpaulin with quick-release fasteners and tensioners for positive locking * Illuminated overwidth markers Lifting Roof: Hydraulically operated lifting roof Ramp: Hydraulic fold-down tail ramp, 25-ton capacity Chassis: 3 x 9-ton axles * Lift axle * Trailing steering axle for optimized cornering Load Securing: Continuous lashing rails in the side frame, floor lashing points at regular intervals * Receptacles for plug-in planks to ensure lateral positive locking Floor and Interior: Phenolic plywood flooring * Above the wheels: steel plate * Aluminium folding plate for crossing the step in the semi-trailer Support Equipment and Attachments: Two-stage landing legs at the front with large tread plates * Wheel chocks and side-mounted stainless steel storage boxes with recessed locks Electrical and Lighting: 24V system with side marker lights and LED tail lights * Standard connectors: 2x 7-pin and 1x 15-pin Wheels and Splash Protection: Steel rims * Mudguards with flexible wheel arch liners and mud flaps * 12x 235/75 R17.5 tires On request, we can offer the vehicle with new curtains and/or a new paint finish. Further information available upon request.

Condition: used, empty load weight: 18,500 kg, maximum load weight: 59,200 kg, overall weight: 77,700 kg, axle configuration: > 3 axles, first registration: 10/1978, loading space length: 9,650 mm, loading space width: 3,150 mm, loading space height: 1,100 mm, total height: 142,000 mm, suspension: steel, tire size: 8,25 R 15 PR 18, color: green, mileage: 1,001 km, gearing type: other, driver cabin: other, Vehicle location: in transit, 6 axles, Kässbohrer axles, leaf suspension, forced steering, lashing eyes, 2-part loading ramps, front support, twin tires Body: 600mm ramp width, 1950mm between ramps, 6 axles, 3rd, 4th, 5th, and 6th axles hydraulically forced steered, fifth wheel height 1,550mm loaded, kingpin 3 ½", 6 x 10.55t axles, total length 14,200mm. Kedpjxwa Uyjfx Agzenf All information provided without guarantee, as the vehicle is in transit! ACCESSORY DETAILS WITHOUT GUARANTEE; subject to change, prior sale, and errors!

Condition: new, empty load weight: 10,600 kg, maximum load weight: 37,400 kg, overall weight: 48,000 kg, axle configuration: 3 axles, suspension: air, tire size: 235 / 75 R 17,5, color: other, gearing type: other, front tire size: 235 / 75 R 17,5, rear tire size: 235 / 75 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Reinforced design, air-sprung with lift axle, axle load gauge, high bed length approx. 3,500 mm, low bed length approx. 8,800 mm, loading height approx. 900 mm, suitable for 2-axle and 3-axle tractor units, front wall approx. 800 mm high, 16 stake pockets in the outer frame, 32 lashing rings, ramp approx. 4,200 mm long (2-part), hydraulic ramp displacement, ramps driveable across the gooseneck. -- Subject to errors, omissions and changes, sample images -- More data at: !, More Details: ! Kjdpfxjxnpgys Agzjnf

Condition: new, maximum load weight: 45,250 kg, overall weight: 58,000 kg, axle configuration: > 3 axles, total width: 2,550 mm, Equipment: ABS, You can find our complete inventory of vehicles available for immediate and short-term delivery on our website. Excerpt from the equipment list. Full specifications available upon request. Chassis, stepped: * Special steel frame made from high-strength fine-grained steels, electrically welded at connection points * Generously dimensioned outer frame. 4-axle configuration * Wheel covers over the axles with spray suppression * All steel parts sandblasted * Side underrun protection made of anodized aluminum mounted * Increased point load approx. 30,000 kg over approx. 4,000 mm * Special construction in the stepped area for the longest possible low-bed length in combination with AluLeg drop supports instead of telescopic support legs, maximum rear swing clearance of the tractor unit approx. 2,100 mm Special body with rear stake extension: * DINKEL – special body * Self-supporting aluminum roof beam / profile approx. 120 x 100 mm, sliding roof with plastic flaps * Rear stakes extendable for loading/unloading up to approx. 4,200 mm * Three sliding stakes per side with elastic relief * Additional intermediate stake lockings in roof beam and parked position, via pull cable and spring bolt * DINKEL – mechanical lift roof, height-adjustable * Lift roof height approx. 400 mm, operable from both sides or one side without opening the opposite side * Additional height adjustment of approx. 480 mm in approx. 40 mm increments by adjusting the stakes * Front cover at bulkhead for driving operation under the tarpaulin up to a total height of approx. 4,400 mm * Four rows of stackable approx. 150 mm aluminum slats on the side, 450 pockets below, four rows of single pockets above. Only three rows of slats in the raised platform, spacings evenly distributed Floor: * Approx. 27 mm special waterproof bonded beech phenolic plywood, rough surface * Steel sheet in the wheel well area. Suitable for forklift traffic as per DIN standard * Outer frame flush with deck surface Brakes: * WABCO air brake system with EBS according to EC Directive 71/320, including PREV (Parking-Release Safety Valve) * Spring-loaded brake cylinders as parking brake * WABCO Smart Board with mileage counter and axle load display * Including WABCO tire pressure monitoring system Axles: * 4 x 10,000 kg SAF with drum brakes in low-loader design * Air suspension with lift and lower device, total lift approx. 230 mm * Third and fourth axles as friction-steered trailing axles with electric and mechanical lock Twin tires: * 235/75 R 17.5, 16-ply. Make of our choice, including spare wheel holder * Without spare wheel Lighting: * According to EU regulations, including LED side marker lights * Position lamps in LED design * 2 additional reversing lights * 2 work lights on the inside front wall, upper section Paintwork: * Chassis and body in one color, RAL 3002 carmine red * Intermediate stakes, axles KTL-coated black * Corner stakes hot-dip galvanized * Plastic parts black * Galvanized parts unpainted * Rims in factory silver Kodpjwx Dbijfx Agzsnf Special equipment included: * 15-pin electrical supply cable * Air suspension in ECAS design, operated on the trailer * Oversize signage front and rear in galvanized, infinitely telescopic design with installed marker lights, including sockets for rotating beacons (small signs) * Additional external release for sliding roof frame lock * 4 stake adapters for special outer frame profile, to lock intermediate stakes as needed * PVC sliding tarpaulin, color similar to RAL 9

Condition: used, maximum load weight: 26,380 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 10/2020, next inspection (TÜV): 10/2025, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, Wiese Mega curtain-side trailer with Dhollandia ramp 9t * Dhollandia tail lift with ramp function * Type DHLSU.90, lifting capacity 9,000 kg, load centre 1,000 mm, supports * Remote control * SAF axles with air suspension and disc brakes * 1st axle liftable * Stainless steel toolboxes * Tyres 435/50R19.5 Kedpfxswx Trwe Agzsnf For further information, we are at your disposal

Condition: used, maximum load weight: 26,100 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 03/2013, next inspection (TÜV): 02/2025, loading space length: 13,650 mm, loading space width: 2,480 mm, loading space height: 3,000 mm, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, Krebs Mega sliding tarpaulin trailer with Dhollandia LBW 9 tons with ramp function Knjdpou Em Nnsfx Agzsf * Recently painted new tarpaulins, rear and front portal * SAF axles * 1st axle can be lifted * 3rd axle as self-steering axle * Dhollandia tail lift type DHLSU.90, lifting capacity 9,000 kg, ramp function * Radio remote control * 3 large storage boxes * Work lights * Ice-Protect We are happy to provide you with further information