Veneer guillotine

CASATI

Condition: good (used), Code: 0193 Brand: CASATI MACCHINE Model: BIG 3200 - CE Standard Hydraulic two knives veneer pack guillotine shear - CE Standard Description: Bljdpfx Amjqzky Ejrek Sturdy steel made structure, cast iron knife beam. Self-lubrificating prismatic slide-ways The machine allows, with a single operation, to cut the veneer pack on both sides to be trimmed - The simultaneous trimming on two sides of the veneer pack is carried out thanks to the movement at the same time, of two knives, one fitted on a fixed structure and the other one on a moving part - The machine is equipped with an adjustable rear shoulder, as well as with a pressor to clamp the veneer pack during cutting operations. Possibility of working as a single guillotine shear Useful cutting length (as double guillotine shear) mm 3200 Useful cutting length (as single guillotine shear) mm 3550 Pressore stroke mm 100 Pressor width mm 550 Min width to be cut mm 18 Max width to be cut mm 530 Scrap adjustment field mm 0/50 Photoelectric cells Electronic programmer allowing to program the number of cuts to be effectuated and the relevant width Perimeter protections Total power installed Kw 13, 9 Operating pressure bar 6/7 Overall dimensions mm 5200 x 1700 x 1800 h Weight kg 9000

Condition: like new (used), Working width 1350 mm The machine is in excellent, new condition as shown in the pictures. Bledpfx Ameuuitgjrek

Condition: excellent (used), Year of construction: 2002, I sell the double knife veneer guillotine Casati Macchine Twinset 3100. Year 2002 Bodpfoznfbmox Amrslk Cutting length 3110mm. Cutting height 75mm. Cutting width 15-340mm. Very good condition. Available immediately.

Condition: good (used), Code: 0438 Brand: CASATI MACCHINE Model: CIO 31 - CE Standard Blsdszkqw Eopfx Amrek Hydraulic veneer guillotine for furniture, woodworking shops, custom-made furniture, doors, veneers, and various applications - CE Standard Technical Specifications: Cutting length 3100 mm Working presser opening 45 mm Electrically operated rear stop Max stop depth 600 mm Min stop depth 25 mm Hydraulic power unit motor power 4 Hp Front stop Safety photocells Overall dimensions mm 4100 x 1000 x 1600 h Weight kg 2200

Condition: new, Year of construction: 2026, For professional and precise glue supply in dowel holes and back side grooves. Short introduction: • Always the same and right glue amount • No afterwards cleaning of the workpieces of too much glue is necessary • Easiest and minimal cleaning (1x week) of the gluing system (through cleaning program) • Glue cost savings • Ergonomic and light glue gun compared to squeezy glue bottles • Faster and more precise working compared to squeezy glue bottles Bsdpsdxz Tpjfx Amrjlk

Condition: good (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 10108, cutting length (max.): 2,900 mm, cutting width (max.): 530 mm, CASATI BIG 2600 - Double knife veneer scissors. Machine is 100% functional. Blsdjum Rpgspfx Amrsk

Condition: good (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 209070, CASATI BIT 900/2000 veneer cross-cutting machine. Fully functional. Bjdpsuna E Hefx Amrelk

Condition: new, Year of construction: 2025, Gannomat Concept 70 Eco Laminate – Body press with rapid traverse Technical data: Laminate body press from our showroom; Working area: width from 150 – 2,500 mm, height from 150 – 1,400 mm; depth 700 mm; - Laminate press beam at the top with 6 elements, laminate press beams on the side with 5 elements - Laminate press beams with proven tolerance compensation for tight body joints - Counterpressure surfaces are 40 mm thick, coated, continuous support plates - The pressing force of the press beams is continuously adjusted electronically via 2 potentiometers and set via a frequency converter, therefore, the torque transmission is absolutely wear-free. - Pressing force for horizontal press beams min. 500 daN (kg) to continuously max. 2200 daN (kg) - Pressing force for vertical press beams min. 300 daN (kg) to continuously max. 2200 daN (kg) - Including option: Rapid traverse speed for quick positioning of the press beams, controlled via automatic workpiece detection with sensors in the press beams, pressing speed 5/10/25 mm/sec. and rapid traverse speed 50 mm/sec, the sensors can be switched off for pressing special parts. - Tapping mode for precise positioning of the two press beams, e.g. for low pressing forces, drawers and bodies at 45 degrees. Simple operation via 6 separate push buttons, freely adjustable preselection of pressing time with automatic opening, loading height 300 mm The machine is in our showroom and can be delivered immediately. Bedpfjiidm Njx Amrolk Location: in stock at 54634 Bitburg - immediately available -

Condition: good (used), Year of construction: 1994, functionality: fully functional, cutting length (max.): 3,100 mm, cutting height (max.): 45 mm, overall weight: 2,300 kg, Veneer shears with a maximum cutting length of 3100 mm Maximum thickness 45 mm Bsdpfxev Nzpms Amrolk Built in 1994 With spare blade

Condition: excellent (used), functionality: fully functional, cutting length (max.): 3,100 mm, Veneer Guillotine Casati Macchine CIP31 Bedpfoyzzccjx Amrolk Working length: 3100 mm Total length: 4070 mm

Year of construction: 2005, condition: good (used), machine/vehicle number: C9 15840, Profile brushing machine Tagliabue LB 2 Model: LB 2 Bledpfx Amsg Rn Iajrok TECHNICAL DATA: Year of manufacture: 2005 Tagliabue edge sander with 4 oscillanting sanding units. Two vertical rollers and 2 inner transversal rollers, for transversal brushing.

Condition: not inspected (used), Year of construction: 2012, operating hours: 9,910 h, functionality: unexamined, working height: 45 mm, working length: 2,600 mm, TECHNICAL DETAILS Max. working length: 2,600 mm Blsdpfx Amsyq Ez Hsrok Max. working height: 45 mm MACHINE DETAILS Total connected load: 6.5 kW Operating hours: 9,910 h The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods prior to collection and assumes responsibility for the installation, securing, and operation of the machine at the destination. External reference: 6063

Condition: ready for operation (used), functionality: fully functional, cutting length (max.): 3,550 mm, cutting width (max.): 530 mm, overall weight: 9,000 kg, stroke length: 100 mm, TECHNICAL DETAILS Usable cutting length (as double guillotine): 3,200 mm Usable cutting length (as single plate shear): 3,550 mm Press stroke: 100 mm Press width: 550 mm Min. cutting width: 18 mm Max. cutting width: 530 mm Scrap setting range: 0/50 mm Operating pressure: 6/7 bar MACHINE DETAILS Installed total power: 13.9 kW Dimensions & Weight Dimensions (L x W x H): 5,200 x 1,700 x 1,800 mm Weight: 9,000 kg EQUIPMENT Robust steel construction Blade beam made of cast iron Self-lubricating prismatic guides Bjdpsyf Eucjfx Amrelk Adjustable rear support Press for holding the veneer package during cutting Photoelectric cells Electronic programming device Perimeter safety guards

Condition: used, machine/vehicle number: 007986, Max. panel width: 800 mm Bedpex A Tggjfx Amrelk Max. panel length: 2000 mm Panel return for edgebander: Right

Condition: excellent (used), functionality: fully functional, working width 3100 mm working height 55 mm main motor power 4 kW cast iron frame Blodpfsyhn Scjx Amrsk safety light barriers power supply 380V