Round vibrator

circlon CLS-230

Condition: new, Year of construction: 2025, Pressure blasting cabinet DSK 11.11.30. Blasting chamber: W=1050mm, D=1050mm, H=955mm. 1 TÜV-certified pressure vessel, 30 liters, with conical discharge hopper. 1 abrasive metering valve with pneumatic control for abrasive flow rate adjustment. 1 integrated shut-off cone with guide tube. 1 compressed air connection with pneumatic shut-off valve and branch for control air. 1 pressure regulator for adjusting the blasting pressure. 1 blasting hose DN19. 1 handpiece with boron carbide blasting nozzle, Venturi 8mm. 1 pair of blasting gloves. Electric height adjustment of the cabinet for ergonomic working posture. Memory function to save 3 height positions. Dust extraction filter, 2000 m³/h, 2.2 kW. Bedsga Ehbjpfx Ap Isdd

Condition: used, HIGH SPEED DOWEL CROSS-CUT AND CHAMFERING MACHINE LOSER MOD. AA220 - Range of working diameter: 6 - 18 mm - Capacity: about 7,500 - 15,000 dowels/hour Bsdpfsqpdkcox Ap Isdd

Condition: ready for operation (used), Year of construction: 2015, Working container volume: 200 l Usable volume: 125 l Max. workpiece (diagonal): 170 mm Bsdpfxewcd Nzs Ap Isdd Screen area: 2190 cm² Max. centrifugal force: 49,000 N Coating partially damaged. There are 2 units available!

Condition: new, Year of construction: 2025, * 250 lt Net Volume Bdjdpfx Ash I N Udop Isd * Dosing pump included. * Highly wear resistant P.U.Lining (90 Shore) * High performance three phase current drive motor. * Changeable valf for the wastewater decharging * Main swicth and emergency stop switch. * Timer and working hours timer * Special construction of control panel(EU Standarts) included

Condition: new, pressure 40 t throat 225 mm stroke 8-84 mm Table dimensions 580 x 450 mm ram adjustment 55 mm no. of strokes 130 Hub/min ram surface 185 x 180 mm ram hole 40 H7 mm hole in the table 210 x 170 mm T-slots 22 clamping plate 570 x 450 x 65 mm Bdsdpfx Aob U Hwmsp Ijd total power requirement 3,5 kW weight of the machine ca. 2,7 t dimensions of the machine ca. 1,4 x 1,1 x 2,1 m

Condition: used, Year of construction: 1993, 1500 mm tank diameter / tank height 1500 / 500 mm turning speed range 1500 U/min voltage 380 V volumn 300 Liter Bedpexq Hg Asfx Ap Isdd power requirement 18 kW weight of the machine ca. 1,2 t dimensions 1,5 x 1,6 x 1,6 m Vibration dryer See ??pictures

Year of construction: 2005, condition: ready for operation (used), Tank capacity: 775l, max. batch weight: 100kg, heating capacity: 26kW, max. temperature: 75°C, basket dimensions X/Y/Z: 660mm/480mm/338mm, fine filtration tank 1/2: 100µm/50µm. Machine dimensions X/Y/Z: approx. 1850mm/1400mm/1800mm, weight: approx. 950kg. The machine was overhauled in 2024 and has not been used since. Including basket rotation with swivel drive, automatic water filling and oil separation with coalescence separation unit and oil collection container. Documentation available. On-site inspection is possible. Bedpswr Dxhjfx Ap Iodd

Condition: excellent (used), Year of construction: 2001, operating hours: 4,500 h, functionality: unexamined, machine/vehicle number: 090119, Manufacturing origin CE - Germany Voltage 400V Netweight 7500 kg Custom position 8458.91 20 Dimensions 2,9 x 2,3 x 2,3 m. 29731 hrs - work 4500h rs TECHNICAL DATA AXES Maximum travel X-axis 400 mm Maximum travel Y-axis 300 mm Maximum travel Z1-axis 475 mm Maximum travel Z2-axis 475 mm Relative positions B-axis 0,0001 – 360° Relative Position C1/C2-axis 0,0001 – 360° WORKPIECE Maximum cubic dimensions 80x80x80 mm Maximum weight 5 kg TURRET Number of stations 24 Number of controlled stations 18 Number of steady stations 6 Maximum tool attachment (round) Ø 20 mm Maximum tool attachment (square) 16x16 mm (20x20) Maximum trajectory of turret above tool’s point 500 mm Rotation speed of live tools 1-9000 min-1 SPINDLE Maximum rotation speed 6000 min-1 Maximum bars diameter Ø 42 mm Maximum forced chuck clamping 140 mm BARS MACHINING Maximum bar length for bar’s feed 1000 mm Maximum piece size for the bar taker Ø42 x Long.100 mm Maximum diameter of taker’s collets 42 mm Pulling and pressure force of clamping cylinder 20000N FEEDS X-axis advance force abt.895 daN Y-axis advance force abt.895 daN Z1-axis advance force abt.895 daN Z2-axis advance force abt.895 daN Fast moves axes X/Y/Z 20 m/min Motor’s torque of tool control 2,4 Nm Spindle S1 / Spindle S2 70Nm COOLING (values only as indication) Capacity of pump submerged inside chips conveyor 10 l/min for abt. 4,5 bar 80 l/min 3,2 bar 150 l/min 0,7 bar Capacity of overpressure pump inside conveyor 10 l/min 13,2 bar 50 l/min 9 bar 90 l/min 1 bar Lubricating coolant volume inside conveyor abt.134 L. Coolant volume inside cooling aggregate 45 L. Bdjdpfx Apjht Hg De Iod NUMERIC CONTROL Siemens 840D MACHINING PRECISION Resolution axes X/Y/Z 0,1 µm Resolution axe B 0,0001° Resolution axe C 0,0001° Positioning precision 5 µm Repeatability 0,6 µm Maximum error on workpiece’s concentricity 0,5 µm ELECTRIC Spindle 1 / Spindle 2 (at 100%) 11 kW Spindle 1 / Spindle 2 (at 40 %) 15 kW Advance motors axes X/Y/Z1/Z2 1,3 kW Axis B 1,3 kW Tool control 2,3 kW Hydraulic pump 7,5 kW Hydraulic back movement 0,75 kW Cooling aggregate fan 1 / 2 0,18 kW Circulation pump of cooling aggregate 1,1 kW Compressor of cooling aggregate 2,2 kW Chips ejector 0,25 kW Emulsion pump 1 1,1 kW Emulsion pump 2 2,2 kW Operation tension 400 V Network frequency 50Hz (60option) Control tension 24V DC Absorbed power 35 kW Nominal current 63A Connecting réseau TM / TT / IT PNEUMATIC Maximum operation pressure 10 bar Normal operation pressure 6 bar Minimal operation pressure 5 bar Air output env. 150 L/min Valves tension 24V DC Oil-mist lubrication tank capacity 12 L Quality level 2 selon Pneurop6611 NOISE LEVEL Normal use 78—80 dB errors and omissions excepted-data given without obligation Inventory no.2321018, machine equipped with : Chip conveyor Preparation for bar feeder Tool holders : 6 fixed drills ER32 8 turning tool holders 5 live tool holders ER32 4 live tool holders ER25 6 live tool holders ER20

Condition: used, Year of construction: 1979, SKF cylindrical grinding machine with internal grinding attachment, hydraulically operated. Bsdpfx Apsgt Ea Re Iodd

Year of construction: 2023, condition: new, IMMEDIATELY AVAILABLE ! Vibratory finishing machines with separator The machines of the series VKUE can be used for the surface treatment of metallic and non-metallic workpieces. These machines have a large sieving surface and allow easy separation of the workpieces from the abrasive bodies. Optional accessories - Pneumatic sound flap - Pneumatic damper control - Frequency control - Metering pump - Magnetic valve - Stand for control panel - Flushing tube (different types) Bsdpfx Apsn Smcls Iodd The pictures are for orientation only. The optional accessories are available additional charge.