5-axis machining center CMS Pk 48-TU

CMS PK 48- TU

Condition: like new (used), Year of construction: 2022, immediately available, warranty 12 months, excellent condition Forced convection oven for solvent-containing substances according to DIN EN 1539, 4 charging carts available on request (see image) - Max. temperature 150°C - Usable volume 1875 liters Guedpfx Aijxbtvfoheh - Internal dimensions: W 1250 x D 1000 x H 1500 mm - External dimensions: W 1765 x D 1425 x H 2300 mm - Guide rails and recesses for loading the oven with a charging cart - Maximum permissible amount of flammable substances at 150°C: 83.9 g - Minimum exhaust air flow rate at 20°C: 360 m³/h - KS controller 40-1 for simple temperature control with defined ramp or hold times (1 program, 4 segments) - Controller upgrade to JUMO DICON available on request - Additionally, a simple timer is integrated, which can be started via front buttons - Connection: 30 kVA, 3 x 400 V, 57 A, 50 Hz - Heating power: 36 kW - Weight: 820 kg - Includes 4 charging carts, each with 12 trays and 24 insertion levels, available in stainless steel - Documentation, CE declaration - Electrically tested and with current DGUV test report Inspection in our warehouse by appointment. Oven, drying oven, baking oven, heating oven, industrial oven, solvent oven, paint drying oven, annealing oven, heating oven, temperature oven, drying cabinet, chamber oven, chamber dryer, sintering oven, convection drying cabinet, convection oven

Condition: reconditioned (used), Year of construction: 2015, functionality: fully functional, power: 7.5 kW (10.20 HP), input voltage: 400 V, input current: 16 A, type of input current: three-phase, volume flow: 6,000 m³/h, intake manifold diameter: 300 mm, total height: 2,000 mm, total length: 3,100 mm, total width: 900 mm, overall weight: 925 kg, compressed air connection: 6 bar, nominal flow rate: 5,100 m³/h, negative pressure: 2,700 Pa, Technical data: Suction nozzle diameter D = 300 mm Residual dust content < 0.1 mg/m³ H3 Filter area 28 m² Cleaning method: compressed air Volume flow 6000 m³/h Negative pressure 2500 Pa Sound pressure level 72 dB(A) Motor/fan 7.5 kW 400 V 50 Hz Operating mode: continuous operation Volume of chip collection container 3 x 165 l Weight approx. 1000 kg Dimensions (L x W x H in mm) 3070 x 900 x 1950 Scope of delivery: - Housing, pressure shock-resistant up to 200 mbar, - Chassis, - 3 filling containers for the SMU 6000.1, - Separator with filter, - Fan unit with discharge duct, - Compressed air or vibration cleaning, - Control cabinet with main switch, motor starter and automatic start, - Integrated fire extinguishing system, - Automatic cleaning initiation and integrated filter monitoring with indicator light, - 5 m connection cable with 32 A CEE plug, Gujdpjyi Efcsfx Aihsh - Device plug with phase inverter, including frequency inverter workshop tested

Condition: like new (used), Year of construction: 2024, Overhauled: 2024 Year of manufacture: 1994-2000 Saw blade 560 mm Motor power 6,5 / 8,0 KW Speed 1500/3000 min-1 Cutting speed 2100 - 4200 m/min Saw height control: electronic Working range square max.: 170x170 mm Working range flat max.: 300x150 mm Working range round max.: 200 mm Saw feed 0 - 40 mm/s infinitely adjustable Cutting length 5-950 mm (9999 mm multiple stroke) Feed speed max. 500 mm/s Weight approx. 1900 kg Dimensions LxWxH 2200mm x2700mm x1950mm The machine is in mint condition, both technically and visually, following a completed retrofit. Due to its equipment and design, the machine can be used very efficiently for a wide range of applications. The programmed HMI control system ensures simple and very profitable operation of the machine. The soundproof cabin reduces noise emissions to a minimum. The machine is generally overhauled in our company at the customer's request. Among other things the following points will be renewed: - Conversion to Siemens S7 PLC control - Conversion to Siemens HMI user interface - Replacement of the ball screw - Replacement of servo motor and servo inverter - New electrical components - New pneumatic lines - New pneumatic components - Overhaul or replacement of all pneumatic cylinders - Renewal of the valve terminal - Optimization of extraction performance - Overhaul of minimum lubrication system Gusdpeuiy Hrefx Aihoh - Replacement of general wear parts - Overhaul of the cab The machine also has: - Soundproof cabin - Splitting extension (for a high-quality cutting surface without return marks) - Height control fully electronic Warranty: Unless otherwise agreed, we provide a 6-month guarantee on all parts overhauled or replaced by us. Working time and wearing parts are excluded from the guarantee. Optional: - Mass clamping device for parallel sawing of several workpieces - Flat magazine for automatic feeding of up to 6 m long primary materials - Roller conveyors for primary material - Reinforced motor 18.0 KW (frequency-controlled) - Delivery and installation on your premises - Training of your employees

Condition: good (used), Year of construction: 2010, Ref. -No.: 10287 Manufacturer: DMG Type: DMC 210 FD Gusdpfx Aiszkpupehjh Year of construction: 2010 Type of control: CNC-Steuerung Control: Heidenhain Mill Plus Storage location: Halberstadt Country of origin: Deutschland X-Travel: 2100 mm Y-Travel: 2100 mm Z-Travel: 1250 mm Machine length: 11.000 mm Machine width: 5.000 mm Machine Height: 3.500 mm Max. Workpiece diameter: 2500 mm Max. Workpiece Weight: 6.000 kg Max. rotary table diameter: 1.850 O Table speed range: 250 min/-1 Tool Taper: HSK-A100 Tool Piece Magazine With: 183 Pcs./pcs. Spindle Speed: 12.000 RPM Max. Torque On The Boring Spindle: 288 Nm Max. Torque: 2.000 Nm Feed Speeds X/Y/Z Axis: 30.000 mm / min Max. Workpiece height: 1.460 mm axes: 5 Further information: Turning and milling center incl. pallet changing system Gear spindle Coolant treatment system, with belt filter, 710 x 50mm 1 Knoll 600S2 chip conveyor 2 Losma oil mist extraction units 1 steel platform (storage space for clamping device): 5,300 x 2,900 mm - Axes renewed 11.2024 - New encoder, electrical components renewed - Geometry protocols available Machine is still in production and under power. The machine can be viewed at any time by appointment.

Condition: used, Year of construction: 2016, x-axis 6.800 mm y-axis 4.000 mm z-axis 1.500 mm Control iTNC 530 HSCI Heidenhain distance between columns max. 5.090 mm distance spindle center to table 1.825 mm type 175149A-0007 turning speed range - main spindle max. 19.800 min/-1 power capacity - main spindel 20 kW tool taper HSK-A63 swivellable B: +115° / -115 ° rotatable C: +/- 200 ° type 178099-0005 turning speed range - main spindle max. 10.020 min/-1 power capacity - main spindel 20 kW tool taper HSK-A100 swivellable B: +115° / -115 ° rotatable C: +/- 200 ° table surface area 6.000 x 3.000 mm max. table load 50,0 t height over floor 100 mm number of T-slots 12 T-slot - width 28H12 mm T-slot - distance 250 mm number of toolpositions 62 (38+24) pos. number of toolpositions HSK A63: 37+1 pos. number of toolpositions HSK A100: 23+1 pos. max. tool diameter HSK A63: 52 mm max. tool length HSK A63: 250 mm max. tool weight HSK A63: - kg max. tool diameter HSK A100: 80 mm max. tool length HSK A100: 450 mm Gsdpfxozf Nn Se Aiheuh max. tool weight HSK A100: - kg rapid traverse ( X / Y / Z ) 40.000 mm/min rapid traverse B/C: 4.320 °/min feed speeds X/Y/Z: 30.000 mm/min Working speed B/C: 2.160 °/min Accelaration max. 3,2 m/s² x-axis 6.800 mm y-axis 4.000 mm z-axis 1.500 mm b-axis +115° / -115 ° c-axis +/- 200 ° total power requirement 180 kVA dimensions of the machine ca. 12,5 x 15,0 x 7,0 m 5-Axis-High-Speed-Gantry-Big-Machining-Center DROOP & REIN - FOGS 40 60 C - Fork head

Condition: ready for operation (used), Year of construction: 2018, Max. profile length for 3 side machining: 7600mm, Y axis: 845mm, Z axis: 620mm, max. travel speed X axis: 63m/min, max. travel speed Y axis: 60m/min, max. travel speed Z axis: 60m/min, swivel range A axis: −90°, 0°, +90°, max. spindle speed: 24,000/min, spindle power: 11kW S1, machining direction: top/front/rear/left/right, positioning accuracy: 0.1mm/m, tool holder: HSK-63F, disc milling cutter diameter: 120mm, saw blade diameter: 180mm, software: eluCam, connected load: 30kVA, compressed air connection: 7bar, compressed air consumption: approx. 180l/min, length: 10,775mm, width: 3430mm, height: 2950mm, weight: 4.9t, operating hours reading: 1550h, standby: 6300h. Accessories: length measurement for profile bar, HSK-63F tool holder set, five chucks, eight collets, 2 layer length machining with second light barrier, camera system, additional stationary tool magazine for eight tools, barcode scanner for reading orders/machining operations and documentation. Was serviced regularly, an on-site inspection is possible. Gedpfx Aiszbb Rreheuh

Condition: reconditioned (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: KR210 R3100 ultra KRC4, overall weight: 1,154 kg, load capacity: 210 kg, arm reach: 3,095 mm, controller manufacturer: KUKA, controller model: KRC4, teach pendant manufacturer: KUKA, Equipment: documentation/manual, IRS Robotics® Refurbished industrial robot. Reliability as Standard. 100% complete and fully functional: robot arm, controller, all cabling, and teach pendant. Includes our warranty and a detailed 77-Point Protocol evaluation performed by our in-house robotics engineers. Brand: KUKA Type: KR210 R3100 ultra Controller: KRC4 Rated Payload: 210 kg Gjdpfexxamlsx Aihsuh Reach: 3095 mm General purpose: For heavy payloads and much more. Delivery time: To be agreed upon. IRS Robotics® refurbished: 77-Point Protocol – fully tested on our test benches, new oil/grease, new batteries, fully cleaned, painted in your desired RAL color. Includes Accuracy Status Measurements (repeatability, accuracy, backlash), especially useful for 3D applications such as 3D milling, 3D printing, and 3D trimming. About: Our daily business is the reliable supply of refurbished A-Brand robots: ABB – KUKA – ABB – YASKAWA. Established in 2002. We ship worldwide.

Condition: excellent (used), functionality: fully functional, Centauro CO700 Band Saw Guedpjvyp I Sofx Aihsh Saw wheel diameters 700mm Max. cutting height 460mm Max. cutting width 680mm Max. band width 40×0.6mm Motor power 3kw Wheel rpm 736r.p.m CE certificate Year of production 1997

Condition: excellent (used), Year of construction: 2008, operating hours: 82,500 h, functionality: fully functional, travel distance X-axis: 5,000 mm, travel distance Y-axis: 3,000 mm, travel distance Z-axis: 1,750 mm, feed rate X-axis: 65 m/min, feed rate Y-axis: 65 m/min, feed rate Z-axis: 65 m/min, spindle speed (max.): 20,000 rpm, rapid traverse X-axis: 65 m/min, rapid traverse Y-axis: 65 m/min, rapid traverse Z-axis: 65 m/min, torque: 63 Nm, overall weight: 90,000 kg, Equipment: rotational speed infinitely variable, First commissioning: 2008 Control system: Heidenhain iTNC 530 incl. handwheel HR420 X-axis: approx. 5,000 mm Y-axis: approx. 3,000 mm Z-axis: approx. 1,750 mm A-axis: -120 / +95° C-axis: ± 360° Maximum workpiece size 3,800 mm (X-direction) 1,800 mm (Y-direction) 1,150 mm (Z-direction) Can be machined in 5 axes (90° free A-axis) in a single setup using a 300 mm long tool. Machine operating hours: approx. 83,000 h Total spindle hours: approx. 37,000 h Machine bed (can be installed flush or above ground!) Dimensions: 5,000 x 2,250 x 300 mm - manufactured from EN-GJL-250 9 T-slots according to DIN 650-28H12 with a spacing of 250 mm and 125 mm from the edge 2-axis milling head, inspected by the manufacturer! Spindle power: 20 kW Spindle speed: max. 20,000 min-1 Torque: max. 63 Nm Tool holder: HSK 63A Tool clamping: hydraulic Holding torque (clamped) A & C axis: 2,000 Nm Drive system for linear axes Feed rate X, Y, and Z axes: up to 65 m/min Axis acceleration X, Y, and Z axes: up to 5 m/s2 Gujdpfezkuirex Aihjh Connection data Voltage: 400 V Frequency: 50 Hz Power consumption: 130 kW Dimensions, weights Machine footprint without peripherals: approx. 7,500 x 8,500 x 6,600 mm Total weight: approx. 90,000 kg Color Enclosure, portal, control cabinet: RAL 7035 light gray Milling head and applications: RAL color 5002 aquamarine blue Additional equipment - Minimum quantity lubrication - 50-position tool changer - Work area cover Condition of the machine The milling head has been freshly inspected by the machine manufacturer, thus partially overhauled and fully functional. Completely new machine bed from Stolle! The additional modules shown on the machine bed are not included in the scope of delivery. The extraction systems and ducts shown are also not included in the scope of delivery. The previous owner was an established Formula 1 team from Central Europe. The machine was always under a maintenance contract with the manufacturer. Currently, the machine is disassembled and stored. However, an inspection is still possible at any time by arrangement.

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, 5-axis CNC machining center for processing carbon fiber and fiberglass components, plastics, Ureol, and wood. Availability: approximately 4–6 weeks. Machine details: CMS ARES 3626 - Axis travels: X-axis: 3,600 mm Y-axis: 2,600 mm Z-axis: 1,200 mm Gsdpfxoza Dlio Aiheuh B-axis: +/- 120° C-axis: +/- 270° - Universal tool head (20 kW | max. speed: 24,000 rpm), synchronized - Tool magazine: linear magazine with 16 stations, moving in the X-direction - Tool holder: HSK 63A - Machine table with vacuum aluminum plate - CNC control: Osai Open - Vacuum system: 2 x 100 m³/h - Swivel operation, round axis measuring unit, 3D measuring probe, dust protection, preparation for extraction system, ... Additional services: installation, commissioning, and training available!