Permanent chuck

COLCHESTER

Condition: good (used), Steady rest COLCHESTER Magnum Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details! Guodpfx Akjzcnw Ijysc

Condition: excellent (used), Carbide saw grinder Vollmer model Akemat B4 year 2001 Gsdpfxsui S Euo Akyouc

Condition: used, Year of construction: 1992, turning diameter over bed 350 mm Gjdoyqvxpepfx Akysuc turning diameter over slide rest 196 mm turning length 1250 mm turning speeds 3250 U/min bed width 350 mm total power requirement 7,5 kW dimensions of the machine ca. 4x1,5x1,5 m - Accessories available. The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: excellent (used), Year of construction: 2019, machine/vehicle number: 308888, turning diameter over cross slide: 210 mm, spindle bore: 40 mm, turning diameter over bed slide: 300 mm, turning length: 1,000 mm, spindle speed (max.): 2,500 rpm, spindle speed (min.): 40 rpm, Turning diameter in gap: 480 mm, tailstock quill diameter: 42 mm, tailstock quill stroke: 110 mm, - With ACU-RITE manufacturer digital display - With tailstock, Multifix quick-change tool holder, and three-jaw chuck (Ø 150 mm) - Width in front of faceplate: 115 mm - Lead screw diameter: 28 mm - Thread: 6 mm - Feed (16 metric): 0.03 – 2 mm/rev Gsdpfx Aowxratskyouc - Cross slide width: 140 mm – travel: 190 mm - Top slide width: 82 mm – travel: 92 mm - Tool holder: 16 x 20 mm

Condition: excellent (used), Maximum machinable diameter above the bed: 575 mm Maximum machinable diameter above the slide: 525 mm Maximum machinable diameter above the small cross slide: 300 mm Distance between centers: 2000 mm Spindle passage diameter: 51 mm Number of spindle speeds: 18 Spindle speed range: 32 to 2500 rpm Bed width: 400 mm Gsdswlgdyepfx Akyjuc Maximum cross slide travel: 305 mm Maximum upper slide travel: 140 mm Maximum tailstock travel: 150 mm Overall dimensions: 3405 x 1175 x 1345 mm Machine weight: 2200 kg

Condition: used, Year of construction: 1986, turning diameter over bed:335 mm turning diameter over slide rest:165 mm turning length:635 mm total power requirement:2,2 kW :3 - Achsen - Digitalanzeige :Ø 40 mm :30 - 2500 U/min :D1-4 Camlock 4-jaw-chuck diameter:200 mm 3-jaw chuck:200 mm mm :MK 3 weight of the machine ca.:860 kg dimensions of the machine ca.:1700x1000x1700 mm digital readout:Heidenhain Gujdpfeufud Rjx Akyoc Machine is in good condition. Accesssories like tool holders etc come with the machine

Condition: excellent (used), Year of construction: 2006, CNC Teach-in Lathe COLCHESTER Alpha 1350 XT Travel X: 245 mm Numerical Command FANUC Between points: 650 mm Maxi turning diameter: Ø 350 mm Guodpfxjzblhno Akyoc Spindle diameter: Ø 41 mm Max Rotation: 3500 RPM Turret: 8 tools VDI 30 Year of construction: 2006 Spindle motor: 5,5 kW 3 speed ranges Centralized lubrication pump Delivered with 2 3-jaws chuck Ø 160 mm Delivered with some tool holders (see photos) Voltage: 380 V Dimensions (L x W x H): 2500 x 2000 x 1900 mm Weight: approx 2 T Machine in very good condition

Condition: ready for operation (used), Year of construction: 2016, travel distance X-axis: 200 mm, travel distance Y-axis: 150 mm, travel distance Z-axis: 250 mm, controller manufacturer: EMCO, total height: 1,100 mm, table load: 10 kg, overall weight: 400 kg, spindle speed (max.): 5,000 rpm, spindle motor power: 1,100 W, tool weight: 700 g, product length (max.): 1,135 mm, number of axes: 3, This 3s EMCO Concept Mill 105 was manufactured in 2016. It features a maximum spindle speed of 5000 rpm and a spindle motor power of 1.1 kW, providing efficient machining capabilities. The machine has a table size of 420 × 125 mm and a maximum table load of 10 kg. If you are looking to get high-quality milling capabilities, consider the EMCO Concept Mill 105 vertical machining centre we have for sale. Contact us for further details. • Distance spindle nose to table: 95–245 mm • Table size: 420 × 125 mm • T-slots: 2 × 11 × 90 mm • Max spindle torque: 4.2 Nm • Rapid traverse (X/Y/Z): 5 m/min • Feed rate: 0–5 m/min • Max feed force X/Y: 2000 N • Max feed force Z: 2400 N • Positioning accuracy (X/Y/Z): 0.005 mm • Repeatability: 0.005 mm • Tool stations: 10 • Max tool diameter: 55 mm • Max tool length: 50 mm • Tool change time (T1–T2–T3): 9.7 / 5 / 7.5 s • Connected load: 1.4 kW Gsdpfx Asyhcfkskyouc • Required air pressure: 6 bar

Condition: used, Year of construction: 1999, Technical details: turning diameter over bed: 554 mm turning dia. over face-slide: 370 mm turning length: 1000 mm centre distance: 1100 mm control: Fanuc 210i longitudinal traverse (z-axis): 1000 mm Transversal stroke (x-axis): 290 mm revolution per minute: 16 - 1800 U/min spindle stroke: 178 mm feed:: 10 m/min. spindle passage: 104 mm spindle nose: D1 - 11 tailstock taper ISO: 6 MT spindle drive: 11/7,5 kW connection voltage: 380 V electrics - voltage/frequency: 3 Ph / 400 V / 50 Hz V/Hz total power requirement: 11 kW Gedpsv Azdwefx Akysuc Weight approx.: 4,0 t dimension machine xH: 3,3 x 1,8 x 1,7 m

Condition: used, Description Turning diameter over bed: 350 mm Turning diameter over support: 200 mm Turning length: 500 mm Speed range: 34-1500 rpm Space requirement approx.: 1600 x 1000 x 1400 mm Total power requirement: 2.2 kW Guodpfx Akjvkxiyoyec Machine weight approx.: 1 t SYSTEM for thread cutting needs to be overhauled, not active. 1 used COLCHESTER STUDEN center & spindle lathe

Condition: excellent (used), 1 permanent - magnetic Chuck D = 315 mm Gujdpfx Aked Eaaueyoc with mounting flange DIN 55027 Gr. 6

Condition: used, Year of construction: 1985, Parallel Lathe COLCHESTER type MASTIFF 1400 Between points: 2000 mm Maxi Ø on bench: Ø 535 mm Maxi Ø over saddle: Ø 380 mm Maxi diameter in brocken bed: Ø 815 mm Spindle diameter: Ø 90 mm Spindle speed: from 18 to 1400 RPM Gjdpfx Akezardaeyouc 3-jaws chuck Ø 310 mm Year of construction: 1985 Threadings: Metric + Whitworth 3 points Fixed Steady Tailstock: CM5 Scale: 2 axes NEWALL Square turret GOODSHAPE Accessories: 3 tool holders + few sets of jaws Lubricant pump Voltage: 380 V Dimensions (L x W x H): 3600 x 1500 x 1700 mm Weight: approx 3 T

Condition: excellent (used), Year of construction: 2012, Colchester Student 2500 Gap Bed Centre Lathe (2012) Ex Research Machine Super Condition Swing over Bed 330mm Swing in Gap 480m Swing Over Cross Slide 210mm Distacne Between Centres 635mm Spindle Bore 40mm Spindle Nose D1-4 Spindle Speeds 40 – 2500rpm Spindle Power 2.2kW Supplied with: 3 Jaw Chuck with Forwards and Reverse Jaws Tool Holders as Picures QCTP Coolant Tool Box 5C Collet Chuck Chuck Keys 3 Phase 415V Electics For sale with *Jet Machinery Ltd* Gujdpfx Akoy U Rtweyec Jet Machinery Stock No: #79230 Machine Serial Number: 308029 Cost: £7,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: good (used), Year of construction: 2006, functionality: fully functional, travel distance X-axis: 2,500 mm, travel distance Y-axis: 920 mm, travel distance Z-axis: 820 mm, controller manufacturer: Heidenhain, controller model: iTNC530, total height: 2,950 mm, total length: 6,000 mm, total width: 3,800 mm, table width: 900 mm, table length: 3,100 mm, rotational speed (min.): 20 rpm, rotational speed (max.): 18,000 rpm, overall weight: 25,000 kg, spindle speed (min.): 20 rpm, spindle speed (max.): 18,000 rpm, coolant supply: 40 bar, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, X-axis travel: 2500 mm Y-axis travel: 920 mm Z-axis travel: 820 mm Table size: 3100 x 900 mm Gjdpfx Akeyac Tleyjuc Spindle nose: SK/ISO40 Spindle speeds: 20 - 18.000 rpm Toolchanger: 30 pockets Controller: Heidenhain iTNC 530 Featured with: - Chipconveyor - Cooling through spindle 40 Bar - ISO40 tools - Machine manuals Country of origin: Germany Motor power: 35 KW Machine LxWxH: 6000 x 3800 x 2950 mm Machine weight: 25.000 kg

Condition: used, used spindle headstock Gedpfxsy Ul Hfs Akyjuc suitable as a source of spare parts spindle bore 90 mm clutch in good condition