Granule dryer Plastic dryer

Colortronic Dry-Flex M400

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: 61037337, clamping force: 800 kN, screw diameter: 30 mm, displacement volume: 113 cm³, injection pressure: 2,500 bar, injection weight: 103 g, mold height (min.): 400 mm, ejector force: 22,600 N, ejector stroke: 150 mm, opening stroke: 900 mm, total length: 3,960 mm, total width: 1,480 mm, total height: 2,020 mm, overall weight: 3,550 kg, heating capacity: 10.9 kW (14.82 HP), drive type: Hadraulisch, clear span: 470 mm, tool weight: 1,000,000 g, Injection molding machines direct from the manufacturer! As the manufacturer KraussMaffei, we offer you our tested and flexible stock machines here: The fully hydraulic CX series offers a particularly compact, efficient and flexible two-platen machine. The very compact two-platen concept with cantilevered clamp offers generous space for peripheral equipment and excellent accessibility. Efficient and intelligent energy management with BluePower servo drive continues to provide a powerful basis for the highest demands and the right solution for every application. TECHNICAL DATA: KM 80 / 380 CX G06 (order 38655610) CONTROL  MC 6 with 21.5" TFT color screen with multi-touch functions CLAMPING UNIT  Clamping force kN 800  Mold opening force, max kN 55  Clear width (h x v) mm 470 x 420  Clamping platen (h x v) mm 670 x 670  Tool installation height min. - max. mm 400 (increased by 150 mm)  Opening width mm 900 (increased by 150 mm)  Mold opening stroke max. mm 500  Hydraulic ejector drive  Ejector stroke mm 150  Ejector force forwards/backwards kN 22.6 / 9.8  Ejector speed forwards/backwards mm/s 760 / 800  Max. Mold weight kg 1000 SPRING UNIT  Screw diameter / type mm 30 / standard (customization possible)  Effective Ls/D ratio 26.7  Injection pressure bar 2500  Stroke volume cm³ 113 Cgodoud N Hdjpfx Anwet  Shot weight at max. stroke for PS g 103  Injection speed mm/s 100  Injection flow rate cm³/s 71  Screw drive/speed 1/min 295  Plasticizing flow (standard) g/s 12.3  Nozzle contact force kN 50 ELECTRICAL PARAMETERS Connected load kW 15.0  Installed heating capacity kW 10.9  Power supply V / Hz 380 / 50 3 phases with neutral conductor WEIGHT AND DIMENSIONS  Net weight with switch cabinet t 3.55  Length x width x height m 3.96 x 1.48 x 2.02 ADDITIONAL EQUIPMENT  Low-wear plasticizing  BluePower fully insulated plasticizing cylinder  Open nozzle  1 additional temperature control point for nozzle heating  Air valve 1 - compartment (BWAP)  Pneum. Control hot runner valve gate 1 - compartment  Hydraulic core pull 1 - compartment (BWAP)  Euromap interface handling E18, E63  Euromap interface (central computer) E67, E77  Adaptive Process Control (APC)  Injection stamping circuit  Graphic analysis package The machine is located in our factory in Parsdorf and is available at short notice. Further additional options can be offered on request. We look forward to your inquiry.

Condition: excellent (used), Year of construction: 2008, Gravicolor 30 GC 30-M-O-Z Manufacturer: Motan Year of production: 2008 A gravimetric dosing and mixing unit designed for direct mounting on the inlet flange of a plastics processing machine. The device allows dosing and mixing of up to 4 granulated components. The actual, measured and weighed quantities are constantly compared with the set values using a modern microprocessor-based control system, which guarantees very high recipe accuracy (+/- 0.1%) thanks to continuous self-optimization. The complete unit includes: 2 feed tanks for primary material or regranulate/primary material 2 feed tanks for masterbatches or additives 2 pneumatically controlled conical dosing heads 2 precision dosing screws with motor drive Material tanks – capacity approx. 7 litres Weighing tank – capacity approx. 0.8 litres Mixing tank – capacity approx. 3.0 litres Manually operated gate valve GRAVInet controller with colour touch panel for recipe, milled material and process data management, vibration compensation and continuous self-optimisation; built-in Ethernet port and standard reporting/printing functions Technical data: Cgjdpfx Aewm Ii Tjnwot Average capacity: 60 kg/h Main component dosing range: 1–100% Additive dosing range: 0.5–10% Power supply: 1/N/PE 230 V 50 Hz Power consumption: 100 W Compressed air: 6–8 bar, without oil and water Weight: approx. 60 kg ✅ The set includes Piovan material feeders - visible in the photos.

Condition: new, *TECHNICAL SPECIFICATION: Heating power hot circuit: 48 kW heating capacity cold circuit: 12 kW cooling capacity hot circuit: 42 kW cooling capacity cold circuit: 270 kW medium: water up to 200°C Max. external volume: 10 ltr at 200°C Max. flow rate: up to 200 l/min  Cjdpeg Ey Ufofx Anwjgt max. delivery pressure: up to 6,5 bar motor power: 5,5 kW Dimension LxWxH: 1.395 x 753 x 1.180 mm Weight approx. 580 kg *HIGHLIGHTS EQUIPMENT: -regulation and control via SPS with touch screen -heating via stainless steel tubular heating elements made of Incolloy -Heating control via solid-state relay -control box IP54 externally ventilated2 -electrical wiring on terminal blocks -pot. free input for signal for cold/warm changeover (front door) - Pot.-free contact for collective alarm on 3-pin plug-in connector (front door) (front door) -temperature control unit with heating and cooling circuit, for connection of a valve station for quick changeover between hot and cold circuit -temperature controlled feed of the return water -level monitoring with automatic level compensation -dirt filter in the cooling water supply and in the return of the circulation system -Separate automatic filling with strainer -Flow measurement in differential pressure principle in both circuits -monitoring of the heating rod surface by temperature sensors -System pressure control, necessary compressed air connection: 6 to 8 bar -booster pump type DS 360 for water make-up -corrosion-resistant components (VA, MS) -unit mounted on rollers and ready for connection *OPTIONS: -System EcoTemp for intermittent operation -connection for ext temperature sensor PT100 or type J/K -Remote touch screen with 15 m cable Visit our website for more details or for other performance classes. *This device is compliant with the European Directives. Other directives and standards are only fulfilled if they are listed in the order confirmation. This technical specification reflects the standard equipment, customer requests deviating from the standard will be shown in quotations or order confirmations.

Condition: excellent (used), double pump for Krauss Maffei Maschines Cgsdsg I Uycspfx Anwot SY2DFE1-21/071-071 KM Nr. 6441936 MNR: R900751978

Condition: excellent (used), Year of construction: 2011, operating hours: 28,000 h, functionality: fully functional, clamping force: 1,300 kN, For sale is a hybrid injection molding machine, 2 components, of the brand KraussMaffei and type KM 130-750 CX The machine is in very good condition, ready for immediate use, with low operating hours. Electronic injection unit and dosing unit, hydraulic clamping unit. Technical data: Year of construction: 2011 Operating hours: 28,000 h Clamping force: 130 T Csdpfxeu Hxm Us Anwegt Cylinder Ø 30mm / 40 mm (& 2*50mm additional) Core pull: 1*Hydraulic Valve gate: Pneumatic Tie bar extension: 160 mm Internal pressure transducer Selector switch On request, transportation and loading can be organized at an extra charge. can be organized throughout Europe. Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Condition: used, Payload: 0/7 Kg Arm reach: 1.80 mmNumber of Axis: 6 Repeatability: 0.03 mm Robot weight: 380 Kg Mounting: Floor Cgjdeh Au I Iepfx Anwot

Condition: used, hydraulic vise Make Hilma Jaw width 200 mm Jaw height 65 mm total length 690mm GES. Height 205 mm maximum opening width 440 mm Drive vertically and horizontally with crank Csdpfx Anedhlqyewogt Rotary plate 400 x 370 mm Clamping force 8 to.

Condition: good (used), Sepro robot Type: SR 4030 S3 Year: 08-2006 Codpfjnxkdnox Anwogt

Year of construction: 2002, condition: ready for operation (used), A Krauss-Maffei large-format injection molding machine without robots, conveyors, protective housing and attachments is available. Clamping force: 1300t, injection volume: approx. 8000cm³. Total system dimensions X/Y/Z: approx. 13000mm/3550mm/2850mm, machine weight: approx. 83000kg, operating hours: 73259h, production hours: 57753h. Documentation available. On-site inspection is possible. Expected to be available from Q1/2026. Cgjdpfx Aswut Hysnwot

Condition: like new (used), Year of construction: 2008, Krauss-Maffei horizontal injection molding machine with 120 tons of clamping force. Electric machine. Year of manufacture 2008. Control MC5. 63.000 working hours. 40mm spindle. Extras: anti vibration blades, 8 zones flow meter. Additional options: 1x pneumatic valve, 6 zones hot runner, Euromap 67 for Robot connection. The machine is delivered RE-Conditioned by our technical team and in optimal working condition. We can offer a start-up service at your premises. Technical Details Cedsttgybepfx Anwegt INJECTION WEIGHT 185 gr INJECTION VOLUME 201 ccm WORKING HOURS 63000 YEAR OF MANUFACTURE 2008 DISTANCE BETWEEN COLUMNS 470x470mm PLATE DIMENSIONS 780x770mm CLOSING POWER 1200 kN INJECTION PRESSURE 1860 bar SPINDLE THICKNESS 40mm MINIMUM MOULD THICKNESS 200/450mm OPENING STROKE 850mm