3D metal printer

CONCEPTLASER M1-2010-01-01

Condition: used, Year of construction: 2004, Technical details: x-travel: 1500 mm y-travel: 1000 mm z-travel: 1000 mm control for program: TNC 530 spindle hours: noch nicht bekannt h milling head speed: 1: 30 bis 930 und 2: 930 bis 4000 / steples U/min tool taper: horiz./vertical: SK 50 (DIN 69871/Din 69872 Form A) max. torque on the spindle: 1000 Nm spindle head swivable left - right: 90 ° feed: 1 - 6000 mm/min feed power: 30 kN kN rapid traverse: 15 m/min Number of tools: 1 St. table clamping surface LxW: 1600 x 800 mm table load: 40 kN kN voltage: 400 V / 50 HZ V total power requirement: 42 kW Weight approx.: 15,2 t compressed air: 6,3 bar dimension machine xH: 3,1 x 4,7 x 2,6 m dimensions: Kühlfilter: 1,9 x 1,6 x 1,4 mm space requirements approx. LxWxH: ca. 38,5 m² m² Applications: Milling, drilling; tapping, boring. with direct coded length measuring systems the guideways of the 3 axes are on flat guideways CTS and external cooling Milling head position controlled +/-90° milling spindle nominal drive power 22 kW Lhodpfx Akou Nc Risqsn with integrated hydraulic power unit up to 100bar operating pressure with coolant unit with filtration, with high pressure pump 60 bar (internal cooling), nominal delivery 20 l/min. and low pressure pump 4 bar (external cooling) as well as spray gun Hinged belt chip conveyor DGS, type SSF 600 P50 Accessories: Measuring probe SK40 Reference tool SK40 Milling head SEMPUCO *

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, New machine, immediately available, 12 months warranty -Internal dimensions (w x d x h): 1250 x 4000 x 1450 mm -External dimensions (w x d x h): 1900 x 4900 x 2500 mm -Power consumption: 240 kW -Current consumption: 350 Amperes -Maximum temperature: 1300 °C -Oven weight (approx.): 6000 kg Lhodpfx Aoy Avmlekqon -Control system: JUMO IMAGO 500 -Software packages: (OPCA & PCC) -Display unit: JUMO Logoscreen 601 -Includes: feedthrough hole and 6 additional slots for recording type K customer thermocouples -Multi-zone design (3 zones) -Switchgear with solid-state relays -Climate control for the switchgear -Automatic inlet and outlet dampers -Controlled cooling system (including frequency converter, controlled via the control system) -Electrically driven furnace car -Maximum load: 3.5 tons -Swinging door -Documentation, CE declaration We would be happy to offer installation, commissioning, and training for your employees. Please contact us! We stock new and used industrial furnaces. Inspections in our warehouse are possible upon request. Furnace car oven, car hearth oven, furnaces, annealing furnace, firing furnace, hardening furnace, heat treatment furnace, oven, stress-relieving furnace, enamelling furnace, drying oven, industrial furnace, bogie hearth furnace, car hearth furnace, shuttle kiln, bogie hearth kiln

Year of construction: 2022, condition: ready for operation (used), Offered is an SLM280 2.0 Single 700W year 2022, approx. 5350h, SLM MCS control, build volume X/Y/Z: 280mm/280mm/365mm minus thickness of substrate plate, 3D optics configuration: Single single/double 400W/700W, Dual 400W/700W IPG fiber laser, build rate: 113cm³/h, layer thickness: 20μm-90μm, feature size: 150μm, beam focus diameter: 80μm-115μm, scan speed max.: 10m/s, inert gas consumption process: 5l/min (argon), inert gas consumption purging: 110l/min (argon). Accessories: chiller package HRS050 L/W, screening station PSM100 V3, handling device BPH280, bottle lift, material change kit. SLM280 2.0 complete incl. PSM100, powder containers, substrate plates (1.2709 & AlSi10Mg), additional filter housings, filter elements. Fully serviced annually by SLM Solutions (service reports available). Availability from 01.12.2025, machine dimensions X/Y/Z: 2600mm/1200mm/2700mm. Inspection possible by arrangement. Lhsdpfx Ajxy R Ezokqon

Condition: good (used), Year of construction: 1999, All additional equipement from pictures will come. Lhjdpfoww Irijx Akqon Technical details shown on picture.

Condition: used, Year of construction: 1961, max. workpiece diameter 100 mm min. workpiece diameter 10 mm workpiece length 1000 mm total power requirement 16 kW weight of the machine ca. 3 t dimensions of the machine ca. 0 m Lhjdpswwl I Ijfx Akqjn The guides have been outdated 10 years ago

Condition: used, Year of construction: 1987, Technical details: number of spindles: 8 Lhsdemf Aw Aepfx Akqsn

Condition: ready for operation (used), Year of construction: 1991, cutting diameter 220 mm capacity 90 degrees: square 220 x 220 mm turning speed range: 20 - 140 m/min saw band length 3720 x 34 x 1.1 mm height of material-table 825 mm coolant capacity 80.0 l feed length max. 600 mm total power requirement 2.5 / 3.5 kW Lhsdjxab R Uopfx Akqen weight of the machine ca. 1500 kg range L-W-H 2350 x 2050 x 1500 mm - in checked conditions - machinevideo - ?v=joc0EbemYC8 Equipment: - electro-hydraulic band saw - FULLY AUTOMATIC - for sawing hollow profiles and solid materials made of steel, stainless steel, . tool steel, non-ferrous metals and plastic - control panel on the front right * including button for manual operation (setup/individual cut) - electro-hydraulic material clamping - stepless cutting speed .. 20-140 m/min. - electro-motor chip conveyor - manual adjustment of the material feed range * via handwheel including analogue value display - automatic height adjustment of the saw frame * including device for material detection (start of cut) - coolant device

Condition: used, Technical details: honing diameter: Ø 400 mm stroke: 600 mm throat: 390 mm table-size: 1.550 x 780 mm table surface area: 1.400 x 480 mm table:: fest total power requirement: 4,1 kW Weight approx.: 2,8 t dimension machine xH: 2,0 x 1,2 x 4,35 m Further technical details: - longitudinal travel of machine table approximately 500mm - cross travel of machine table approximately 200mm - working height 350mm (non-adjustable) - distance column / table 0 - 200mm Equipment: - oil tank Ø 300 x 600mm - control panel i.D. * Lsdpfx Akeu Ngybeqehn

Condition: new, Fastech 3-Roll Round Bending Machine FRM 1050 x 90 Technical Specifications: Lodpfx Aehzq Dbskqjhn Special equipment included in the price: hardened rolls motorized rear roll adjustment digital display Sheet metal width 1050 mm Sheet metal thickness 3.3 mm max. Sheet metal thickness for pre-bending 3.0 mm Roll length 1050 mm Roll diameter 90 mm Smallest bending diameter 130 mm Weight 475 kg Dimensions L-W-H 1750 x 800 x 1130 mm Motor: 1.1 KW Equipment: Top and bottom rolls, electrically driven Top roll can be pivoted out Taper bending device asymmetrical roll arrangement self-braking main motor separate control and operating panel Safety cable Values apply to St-37 / 240 N/mm² CE marking

Year of construction: 1995, condition: used, machine/vehicle number: 18891, Force: 10 to. Stroke: 1000mm 3 Broaching-stations With chip-conveyor + platform and safety door Lhedpfebrcmkex Akqon