Brush cleaning machine

Cosma PL 500 CU1 Ceetec

Condition: used, Vacuum tumbler Manufacturer: Henneken Model: B3 Volume: 1200 liters Electric power: 2.8kW Bdedpfx Apsui Rgko Ijd Dimensions: 1130x2225x1675mm

Condition: excellent (used), SCM T150 Spindle Moulder Spindle diameter: 35 mm Bdjdpjw Ral Hjfx Ap Iod Total spindle length: 180 mm Electric spindle lift Electric fence movement Electrically adjustable tilt angle -10/45° Variable spindle speed: 3000-4500-6000–7000-10000 rpm Motor power: 5.5 kW DTR technical documentation

Condition: used, Year of construction: 2016, Angular panel saw with automatic pre-loading and twin pusher system for optimised cutting Osi Plus Numerical Control Os Labelling labelling machine with on-board graphic labelling with part drawings Label printing management software Optiplanning Cutting Optimizer Cutting length mm 4500 Cutting width mm 2200 Blade projection 95 mm Motorized rollers for lateral loading on lifting table 4500 x 2200 mm. The translation speed is 10.8 m\min (50hz) - 13.1 m\min (60hz) Automatic recognition of the lost panel (martyr panel) based on the thickness specified in the machine data Low battery stop Automatic side loading buffer. Includes: perimeter nets, double photocell, push-button panel, predisposition electric for the two motorized pre-rollers and the amplification of 4 rollers in place of the fork passages in the pre- intermediate roller conveyor Pre-loading side roller conveyor dim 3800 x 2200 mm with motorized rollers (height from the ground 325 mm) Inertial conveyor for conveying longitudinal trimmings for angular systems 4500 mm (total length 7295 mm) Bdsdpfeuc Idxox Ap Ijd 3000 mm extension to the inertial conveyor to also convey transverse trimmings Long chute for manual conveying of cross-cut trimmings to the centralized inertial conveyor 2050 x 850 mm air curtain discharge table with wheels at the front Air generator up to 6 floors with air curtain MULTIPUSHER 2.4 system with automatic lubrication Additional mobile lateral aligner on the transverse plane. The presence of this device allows to reduce from 1830 to 1220 mm is the minimum length of the panels that must be sent for cross-sectioning. Automatic blade shaft bending detection device for angular systems (longitudinal and transversal) consisting of a sensor that detects the deflection directly on the blade shaft and a device that detects the revolutions blade directly on the spindle. Remote cycle start button panel Automatic panel loading via rear lifting table Automatic double aligner with pneumatic cylinders Additional movable lateral aligner on the transverse plane Main blade, max diameter mm, KW 15 Scoring blade, max diameter mm, KW 2.2 Blade carriage speed 1-140 m/min. – BRUSHLESS motors Longitudinal pusher carriage speed 90 m/min. Cross pusher carriage speed 135 m/min. Double pusher carriage with 6 grippers on the longitudinal carriage + 10 grippers on the transverse carriage (8 fixed grippers + 2 on the multi-push system) Cutting system for thin panels

Condition: ready for operation (used), Year of construction: 2007, Veneer splicing machine manufactured in 2007. This KUPER FLI model is designed for precision veneer splicing. It operates at a voltage of 400 V and a rated current of 14.5 A. If you are looking to get high-quality veneer processing capabilities, consider the KUPER FLI Veneer splicing machine we have for sale. Contact us for further details. Bdsdjyn Nq Hopfx Ap Ied • Electrical supply: 400 V, 50 Hz, 3 Ph • Rated current: 14.5 A

Condition: like new (used), Year of construction: 2022, As-new condition (only 5,000 m² of parquet processed so far), compact oil application line consisting of: Roller Application Unit: - For the application of oils, etc. - Touchscreen control - Manual height adjustment - Max. working width: 300 mm - Max. workpiece height: 50 mm - Membrane pump with max. capacity of 18 l/min - Frequency inverter for variable speed of application roller - Frequency inverter for variable speed of counter-roller - Conveyor belt speed adjustable: 3 to 14 m/min - Stainless steel recovery trays Pad Group + Brush Group: Bdedex Ah A Aepfx Ap Isd - For spreading and removing excess oils - Touchscreen control - Manual height adjustment - Conveyor belt speed adjustable: 3 to 14 m/min - Max. working width: 300 mm - Max. workpiece height: 50 mm - Pad diameter: 300 mm - Quick-change system for pads - Brush dimensions (L x D): 300 x 160 mm - Quick-change system for brushes UV / LED Unit: - Touchscreen control - Manual height adjustment - Max. working width: 300 mm - Max. workpiece height: 50 mm - UV-LED power: 12 Watt/cm² - Incl. ventilation fan - Conveyor belt made of Kevlar fabric - Conveyor belt speed adjustable: 3 to 14 m/min Outfeed Conveyor Belt: - Length: approx. 2,500 mm - Max. working width: 300 mm - Conveyor belt speed adjustable: 3 to 14 m/min Note for used machinery: • Technical details and prior sale subject to change and errors. • Stated prices are ex works - free loading! • The machine has been cleaned and functionally tested. • All machines are sold as inspected, without any warranty claims. Buyers are free to inspect the machine at its location. • Special agreements are only valid in written form. (We only respond to enquiries with your address and telephone number!)

Condition: new, functionality: fully functional, New equipment MASS International Z series conveyor belt NDZ Angled conveyor / flow conveyor available for short-term delivery Example as shown in the picture: height-adjustable angled conveyor with adjustable angles NDZ 1 Infeed section 600 mm Ascending section 1300 mm Bdjdoiz S Htepfx Ap Iod Discharge section 500 mm Working width 250 mm Overall width 305 mm (without motor) height-adjustable discharge height 700 - 1000 mm adjustable angles for infeed and discharge sections adjustable inclination PU belt Color: black L-shaped cleats Cleat spacing 500 mm Cleat height 30 mm Belt speed 3 m/min Standard control with emergency stop / stop button movable on steerable stop rollers three-part hopper plates for the infeed section The quoted price applies to the NDZ1.

Condition: ready for operation (used), Year of construction: 1977, A roller wide belt brushing machine Tilleke is available. Working width: 700mm, Machine dimensions X/Y/Z: approx. 1500mm/1000mm/1600mm, Weight: approx. 750kg. An on-site inspection is possible. Bedpfsynltqex Ap Isdd

Condition: like new (used), Year of construction: 2019, operating hours: 180 h, functionality: fully functional, total length: 8,000 mm, total width: 1,200 mm, total height: 1,300 mm, type of input current: AC, input voltage: 400 V, power: 10 kW (13.60 HP), SOEST Universal Surface Line for oiling, staining, lye treatment, patination, etc. Primarily intended for parquet surfaces up to 40 cm workpiece width. 1) Roller Machine RCR-400-L Reverse, for applying and removing surface products such as oils, stains, lacquers, etc. 2) Distributor Machine VP-400-1B-2P-2B with one brush, two pad holders, and an additional two brushes, for distributing, working in, or patinating surface media in the pores and/or also for removing, distributing, and working in depending on the desired surface effects. 3) Accessories include two spare application rollers, a material pump (brand new, never used), four replacement brushes, various distributor pads, and a pneumatic brush cleaning machine. This complete surface finishing line is built for professional industrial use and is configured with a full set of equipment. A considerable amount of accessories for the system, such as extra rollers and cleaning machines, is also included (see photos!). Very robust construction, all motors frequency-controlled (Siemens). Speeds are steplessly adjustable for both forward and reverse operation. Maximum workpiece width is approx. 410 mm. The system is in very good condition, with little use—only approx. 180 operating hours—so it can be described as as-new. This surface processing line was only used as a backup line in parquet production and only for specific surface techniques, which explains the low operating hours (used sporadically from 2019 to 2022). In 2023, our company downsized and the system has been stored ever since or is immediately available, and therefore remains in nearly brand-new condition! This system is no longer used in our facility and is therefore being sold. The new price for this line was approx. €87,000 in 2019; the current selling price is negotiable! Bedpeyaiafefx Ap Isdd Inspection of this surface line is possible by appointment. If required, we can also offer 10 drying rack trolleys for sale with this system. (The YouTube video serves only as an example video of a similar system configuration!)

Condition: as good as new (ex-display), This type of semi-automatic machine allows the application of a removable self-adhesive protective film on delicate surfaces and is therefore particularly suitable for painting and panel packaging processes. The film is applied to the panel without debonding, the application of the film can be adjusted more or less long. The machine is suitable for panel masking, to avoid overspry in painting, thus avoiding long and costly manual protection. Suitable for medium production or small batches. Bedpfx Aporu A Rae Iedd Useful working width 1300 mm.

Condition: as good as new (ex-display), Year of construction: 2021, operating hours: 50 h, functionality: fully functional, machine/vehicle number: 000247, GLUE MACHINE FOR SINGLE-COMPONENT POLYURETHANE ADHESIVE. SPECIAL FOR GLUING LAMELLAS OF LAMINATED BEAMS • Maximum gluing width: 300 mm • Gluing head divided into 3 combs, each 100 mm and controlled by solenoid valve • Glue cord pitch: 10 mm Bjdpfxet Nfarj Ap Iedd • Tray with non-stick liquid that automatically closes the combs when the machine does not dose • Glue dosage: 100 to 200 gr/m2, as determined • Gear metering pump • Glue viscosity range: 10.000 to 30.000 mPas • Drag speed: 7 to 15 m/min • Support for 200 l barrel • PLC control, with touch screen. KINCO brand • Machine from the GLUESTREAM company • CE rules • Machine manufactured in 2021 and assembled in May 2022. Like new, it has worked less than 50 hours WE ALSO HAVE THE HYDRAULIC PRESS TO MAKE GLULAM BEAMS, ALMOST NEW MACHINE