Widebelt sanding machine electronic pad

Costa SA TS 1350

Condition: used, Year of construction: 2005, Technical Specifications: Tsdpsx Ex Tmsfx Agvsb - Manufacturer: Costa - Model: SA TS 1350 - Year of manufacture: 2005 - Working width: 1,350 mm - Sanding belt dimensions: 2,620 x 1,380 mm - Sanding heights: 3–160 m - Feed speed: 5–25 m/min. - 1st Unit: - Longitudinal sanding unit - Belt dimensions: 2,620 x 1,380 mm - Electronic sanding shoe, Costa system - roller spacing: 32 mm - Segment width: 32 mm - Drive motor power: 11 kW - Dust removal brush diameter: 180 mm - Operator side: left - Height adjustment: motor-driven - Vacuum conveyor belt - Total power connection: 20 kW / 43 A - Width: 1,924 mm - Length: 2,059 mm - Height: 2,185 – 2,375 mm - Exhaust connections: D 2x100 mm + 2x160 mm - Airflow: 4,830 m³/h at 24 m/s - Compressed air: 6 bar, 880 NL/min. - Volts, Hz: 400 / 50 - Voltage fluctuations: max. ±5% - Weight: 3,100 kg - Location: Blomberg warehouse

Year of construction: 2008, condition: ready for operation (used), functionality: fully functional, *Wemhöner Variopress Model Basic 1000 Plus/Pin – Year of manufacture 2008 *Very good condition, little used *Type KT-MB-28/15-240 *With automatic pin system and inline rotating table *2 tables with automatic Vario-Pin system *With Teflon coating for pre-glued foil *Foil laying system for pin table (pre-glued foil) *Heating plate size: 2800 x 1500 mm *Max. workpiece size: 2,540 x 1,250 mm *Membrane: Yes *Cutting station *Foil storage paternoster, 3.2 m high, with 14 hanging rods *PLC control: Siemens S7 *Operator panel for the PLC control: SIEMENS TP 270 (touchscreen) *Automatic membrane tensioning *Installed power supply: 38.5 kW *Max. chamber pressure: 6 bar Tsdpfoxbcudex Agvsb *Max. press opening: 150 mm *6 cylinders with Ø 125 mm *Operating voltage: 400V 50/60Hz *Height of the press chamber: 40 / 60 mm *Max. press force: 2400 kN *Operating pressure of the hydraulic system: 320 bar

Condition: excellent (used), Year of construction: 2006, Technical data: - working width 1350mm - pneumatic oscillation - vacuum table - Stand alone machine ( Table raise/fall ) 1 Combi unit: - motor power 18,5kW - steel calibrating roller - stepless adjustment of the belt speed Tjdpfevdtxijx Agvjb - sectional pad (52 sections of 26mm each) 2 Combi unit: - sectional pad (52 sections of 26mm each) - motor power 7,5kW - stepless adjustment of band speed - brush on the exit of the material - stepless regulation of feed speed - pneumatic cleaning of belts

Condition: used, Year of construction: 1996, Technical details: pressure: 300 t Tedpfx Aou Ib Drsgvsb chamfer lenght: 6000 mm control: Delem DA 24e distance between columns: 2x5100 mm throat: 645 mm dayligth: 520 mm plate thickness: 5 mm total power requirement: ca. 10,0 je machine kW weight of the machine ca.: ges. ca. 66 t dimensions of machine: L:12,0xB:2,3xH:3,65 m Hydr. Pressbrake 6000-300 - jib arm length= 720mm - incl. back gauge (without crowning system) adjustment travel horizontal/vertical: 680/200mm motoric Optionally, two of these press brakes can be offered - also applicable as a Tandem Pressbrake with 2x 6 meter with 300t, with table size: W:165xL.12000mm, - program sequence via both presse(synchronized) and single available Optional are tools available! Copy of documentation available i.D. *

Condition: excellent (used), Year of construction: 2002, Fröling boiler Tedjmnqhropfx Agvsb Output: 1250Kw Year: 2002 Burner: Gas or oil burner available on request

Condition: new, Year of construction: 2025, Gannomat Concept 70 Eco Laminate – Body press with rapid traverse Technical data: Laminate body press from our showroom; Working area: width from 150 – 2,500 mm, height from 150 – 1,400 mm; depth 700 mm; Todpfjiidm Nex Agvob - Laminate press beam at the top with 6 elements, laminate press beams on the side with 5 elements - Laminate press beams with proven tolerance compensation for tight body joints - Counterpressure surfaces are 40 mm thick, coated, continuous support plates - The pressing force of the press beams is continuously adjusted electronically via 2 potentiometers and set via a frequency converter, therefore, the torque transmission is absolutely wear-free. - Pressing force for horizontal press beams min. 500 daN (kg) to continuously max. 2200 daN (kg) - Pressing force for vertical press beams min. 300 daN (kg) to continuously max. 2200 daN (kg) - Including option: Rapid traverse speed for quick positioning of the press beams, controlled via automatic workpiece detection with sensors in the press beams, pressing speed 5/10/25 mm/sec. and rapid traverse speed 50 mm/sec, the sensors can be switched off for pressing special parts. - Tapping mode for precise positioning of the two press beams, e.g. for low pressing forces, drawers and bodies at 45 degrees. Simple operation via 6 separate push buttons, freely adjustable preselection of pressing time with automatic opening, loading height 300 mm The machine is in our showroom and can be delivered immediately. Location: in stock at 54634 Bitburg - immediately available -

Condition: good (used), Code: 0749 Brand: TAGLIABUE - COSTA LEVIGATRICI Model: TT 3 1300 Automatic sanding machine for worktops, furniture, panels, tables Technical data: Working width mm 1300 Max working thickness mm 130 Min working thickness mm 1 Composition: 1° Transversal belt - Motor Hp 15 - Electronic speed variator with display 2° Transversal belt - Motor Hp 15 - Electronic speed variator with display Transversal sanding belt size mm 1350 x 150 Chevron belt size mm 5510 x 140 Belt blowers Belt feed speed mt/min 5/25 Fixed table and mobile head for on-line set-up Panel cleaning rotary blowers Vacuum table Belt cleaning brush Tedpjh T Dzqjfx Agvsb Infeed roller conveyor Installed power Kw 32 Compressed air 7 Atm Suction inlets: n° 2 diameter mm 200 - n° 2 diameter mm 150 - n° 2 diameter mm 100 Overall dimensions mmm 4400 x 2500 x 1600 h Weight kg 5000

Condition: new, Year of construction: 2026, -Tfon Leveltech® S-3513 Leveling Machine. -The Tfon Leveltech® S-3513 is a precision leveling machine optimized for ultra-thin materials, combining advanced electromechanical controls with easy operation for consistent, high-quality flattening results. -Key Specifications: Material Thickness: 0 – 0.3 mm. -Maximum Material Width: 1.300 mm Minimum Material Length: 70 mm Tjdpfx Agokyrzljvob Quick Change System for Straightening Rollers: Standard. Flattening Gap Adjustment: Electromechanical / PC Controlled. Machine Dimensions (L × W × H): 2,685 × 1,585 × 1,820 mm. Total Weight: 5.000 kg.

Condition: excellent (used), COSTA LEVIGATORS Series S model SN 5-groups first group electronic sectioned transverse belt Tsdpfer Iyvmjx Agveb second group 1 roller third group 1 roller fourth group electronic sectioned pad super finisher fifth group electronic sectioned transverse belt machine width 1350 vacuum inverter on all belt groups inverter on belt outfeed brush group blower group on outlet

Condition: new, Year of construction: 2025, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 150 mm, pressure: 3,450 bar, For sale: MAXIEM 2040 (2025) – New machine, 0 hours, ready for production Opportunity to acquire a brand new MAXIEM 2040, year 2025, in pristine condition. The machine has never been run, with 0 hours on the pump, fully inspected and ready for immediate production start. Equipment: A-Jet (5-axis cutting head) – beveling, angle cutting, and automatic taper compensation Rapid Water Level Control – adjustable water level (raise/lower) Tedpfxswn El Uo Agvsb Premium software – lifetime free updates and unlimited licenses Pump: 40 HP Pump hours: 0 The machine features a cutting area of approximately 4 × 2 meters, offering high precision, great flexibility, and maximum operational reliability. An excellent choice if you want a modern waterjet cutting machine with full capacity – without waiting for a new order. Delivery and installation can be discussed if required.