Milling machine

DECKEL FP 2

Condition: excellent (used), functionality: fully functional, Universal milling machine Deckel FP2 with special paint finish and 3-axis digital readout K&C NEW, in excellent condition. Technical data: >> Machine no. 2200-1958 >> Long sliding head >> 3-axis digital readout K&C NEW >> Swivel table with tilting and rotating function >> Speed: 40 - 2000 rpm >> Feed and rapid traverse in 3 axes >> Drive power: 2.2 kW >> Travels X/Y/Z: 500/200/400 mm >> Equipment: Vertical & horizontal spindle >> Vertical and horizontal quill, extendable - SK-40 >> Collet system S20x2 >> Weight approx. 1100 kg Accessories and equipment: Hedpfx Afs Agwvmsgew >> 3-axis digital readout K&C, newly installed with manufacturer's warranty and operating manual. Display unit: Setting reference points, setting zero points, entering coordinates, switching between mm/inch, absolute or incremental coordinates, circular functions, hole patterns, radius milling functions, etc. >> Coolant system About the machine: Offered is a Deckel FP2 universal milling machine in very good condition. The Deckel has excellent guides and is geometrically perfect. The long sliding head runs smoothly even at maximum speeds. The Deckel has very little backlash and all spindles can be moved easily. The machine has been completely disassembled and repainted. An oil change has been performed. Mechanically and electrically tested. The digital readout from K&C makes working easier and even more precise. Furthermore, you have a 1-year warranty on the new digital readout. Take the opportunity to inspect and test the Deckel on site under power.

Condition: used, functionality: fully functional, fuel type: diesel, operation weight: 29,000 kg, emission class: euro3, Year of construction: 2016, operating hours: 5,660 h, Screen type: Triple-deck classification screen Dimensions upper deck: 1,520 x 4,270 mm (W x L) Dimensions middle deck: 1,520 x 4,270 mm (W x L) Dimensions lower deck: 1,520 x 3,660 mm (W x L) Feeding capacity up to approx.: 350 t/h Feed size: 150 mm Engine: Cat Power: 75 kW Transport dimensions: 15,610 x 3,100 x 3,450 mm (L x W x H) Weight: 29,000 kg Hopper volume: 8 m³ Drive: Dual Power diesel and electric drive Hedsyznb Espfx Afgsw Operating hours electric drive: 10 h

Condition: excellent (used), functionality: fully functional, Universal milling machine Deckel FP2 from a training center Technical data: >> Machine no. 6884 >> Swiveling rotary table >> Speed: 40 - 2000 rpm >> Feed and rapid traverse in 3 axes >> Drive power: 2.2 kW >> Travels X/Y/Z: 400/200/400 mm >> Equipment: Vertical & horizontal spindle >> Extendable vertical quill and horizontal quill - SK-40 >> Collet system S20x2 >> Weight approx. 1100 kg Hsdpfxs Agn Rxo Afgow Accessories and equipment: >> Coolant system >> Brake motor About the machine: A Deckel FP2 universal milling machine in good condition is offered. All spindles can be moved easily. All bellows are new. An oil change has been performed. Mechanically and electrically tested. Take advantage of the opportunity to inspect and test the Deckel machine on-site while it is powered up. The machine is available immediately. For an additional charge, the machine can be equipped with a new K&C digital display.

Condition: used, This DECKEL universal tool milling machine, type FP2A, will be auctioned off in our online industrial auction / machine auction, which includes liquidation of industrial machinery – injection molding machines, CNC machining centers, universal lathes, and more. You can find this and many other items on our platform. Hjdpfxo Agi Tqe Afgsw

Condition: excellent (used), Year of construction: 2002, Control: 3-axis active path control, Heidenhain TNC 123 Spindle speed: 40 - 2000 rpm, geometrically stepped direct drive with 16 gear stages for maximum torque / milling performance Feed rate: 5 to 500 mm/min, infinitely variable Rapid traverse: 1.2 m/min Hodpfx Afjyg I Nfjgow Quill: Extendable vertical quill, 60 mm, SK40 M16 draw thread Axes X/Y/Z: 300/160/340 mm Swivel table: 600 x 210 mm, max. load 200 kg

Condition: ready for operation (used), machine/vehicle number: 46436, Travel distances: longitudinal: 400 mm vertical: 400 mm horizontal: 200 mm Features: Hsdpfx Afsygia Eegsw - Sliding vertical milling head - Tilting angle table 260 x 600 mm - Various tool holders - Setup elements - Rotary table D:280 mm - Documentation Condition: workshop-tested

Condition: excellent (used), functionality: fully functional, Universal milling machine Deckel FP2 from a training center Technical data: >> Machine no. 9502, year of manufacture approx. 1978 >> Swivel-tilting rotary table >> Speed: 40 - 2000 rpm >> Feed rate and rapid traverse in 3 axes >> Drive power: 2.2 kW >> Travels X/Y/Z: 400/200/400 mm >> Equipment: Vertical and horizontal spindle >> Vertical quill and horizontal quill extendable - SK-40 >> Clamping system S20x2 >> Weight approx. 1100 kg Accessories and equipment: >> Coolant system >> Brake motor About the machine: Hedpfe Afy Ngox Afgjw A Deckel FP2 universal milling machine in good condition is offered. All spindles can be easily moved. Most of the bellows are new. The previous owner installed a brake motor. An oil change was carried out. Mechanically and electrically tested. Take advantage of the opportunity to inspect and test the Deckel on-site while it is powered up. The machine is immediately available. For an additional charge, the machine can be equipped with a new K&C digital display.

Condition: used, Gearbox, bevel gear, worm gear Hjdet Snwxjpfx Afgow -Gearbox: Ratio: i = 1:30 -Shafts: Ø 19 x 50 mm / Ø 28 x 60 mm -Dimensions: 150/145/H175 mm -Weight: 5.1 kg

Condition: used, Year of construction: 1989, x-travel 300 mm y-travel 300 mm z-travel 400 mm CNC-control DIALOG 11 spindle taper ISO 40 spindle turning speed range 31 - 5.000 U/min table-size 620 x 390 mm table load 250 kg power capacity 5,5 kW feeds -stepless- 2 - 6.000 mm/min quill stroke 80 mm voltage 380 V total power requirement 11,0 kVA weight of the machine ca. 1,65 t dimensions of the machine ca. 1,85 x 1,90 x 1,80 m Hsdpfx Asx Ndbqsfgsw electric cabinet 1,35 x 0,70 x 1,70 m - Serial-No.: 2836-0175 - control: DIALOG 11 - electrical hand wheel - horizontal milling spindle - coolant equipment

Condition: used, Offered: Universal milling machine. Equipped with: Vertical milling head, overarm, machine table, manual adjustment and clamping elements and vertical machine guideway with bellows cover. Inspection possible by arrangement. Hjdpe Agwqzefx Afgjw

Condition: used, x-travel 800 mm y-travel 400 mm Hodpfsqpl Uuox Afgsw z-travel 300 mm digital readout Heidenhain table surface area 1000 x 520 mm turning speed range 40 x 2000 U/min spindle taper SK 40 total power requirement 2,2 kW weight of the machine ca. 2,2 t dimensions of the machine ca. 1700 x 1600 x 1800 m

Condition: used, travel distance X-axis: 300 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 400 mm, spindle speed (max.): 4,000 rpm, spindle speed (min.): 40 rpm, quill stroke: 80 mm, Milling Machine - Vertical Manufacturer: DECKEL Model: FP 2 A Control: Dialog 11 Technical Data: - X-travel: 300 mm - Y-travel: 300 mm - Z-travel: 400 mm - Speed range: 40 – 4,000 rpm - Tool holder: SK 40 - Swivel range: +/- 90° Hedpfx Afozq Hlfsgsw - Quill stroke: 80 mm Equipment & Accessories: - Enclosure In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools shown, and clamping devices are included in the scope of delivery only if noted in the additional information. Subject to technical changes, errors, and prior sale.

Condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS Travel ranges X-axis: 300 mm Y-axis: 300 mm Z-axis: 400 mm Work table Table dimensions: 620 × 390 mm Spindle Speed range: 40–2,500 min⁻¹ Tool holder: SK 40 Milling head, swiveling: ± 90° Feeds Hjdo Adz Huepfx Afgow Feed range: 2–3,600 mm/min Rapid traverse: 4 m/min Control Control system: Deckel DIALOG 4 MACHINE DETAILS Machine type: Tool milling machine Manufacturer: Deckel Model: FP2 MC Dimensions (L × W × H): 2,000 × 1,800 × 1,800 mm Weight: 1,000 kg

Condition: new, 1 brand new universal milling head in standard or extended version for retrofitting to conventional, NC, or CNC milling machines or drilling machines of any type, system "HURON", swiveling over 2 levels, every angle adjustable Mounting: ISO 40 Overhang: approx. 360 mm Designed drive power: 10 HP Max. speed: 1,800 rpm Weight in standard version: approx. 82 kg Accessories / Special Features: • Manual tool clamping • The main spindle and all shafts and engagements are made of case-hardened and tempered chrome-nickel steel Hjdpfsdbny Eox Afgsw • 2 axes that can rotate relative to each other, allowing every setting angle! System „HURON“ • Tapered engagements are ground according to the „KLINGELNBERG“ system • The roller bearings of the main spindle consist of tapered high-precision rollers • 1 tool clamping screw Delivery time: approx. 12-14 weeks after order receipt Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: ready for operation (used), Deckel FP 2 NC Universal Milling Machine Universal Milling Machine TNC 320 / 321 Travel distances: x- 300mm | y- 300mm | z- 400mm Stepless spindle speed 31.5 - 5000 rpm Feed rates 2-4000 mm/min Rapid traverse 4000 mm/min Tool holder SK 40 Quill stroke 80 mm Machine weight 1350 kg Hodpjxfkm Asfx Afgow You are welcome to arrange an inspection appointment. We can also organise affordable shipping for you! You will receive a proper invoice. For international customers, we can also provide a net invoice. The requirement is a valid VAT ID number. Subject to prior sale. Visit our shop and take a look at our other offers. The specified company names and trademarks are the property of their respective owners and are used for identification and description purposes only. Variations in technical data or errors in the description of the item may occur and are subject to change.