Stylus grinding machine

DECKEL SOE

Condition: reconditioned (used), Year of construction: 1984, Graver grinding machine Make: Deckel Model: S0E Year of manufacture: 1984 - overhauled, repainted RAL7035 light grey / RAL7012 basalt grey Mach. no.: 84-5532 with guarantee Accessories: - Machine stand - Microscope with support - Integrated dust extraction - Grinding wheel with flange - Pulling tool - Operating instructions Incl. installation of an on/off switch with undervoltage release to implement restart protection e.g. in the event of a power failure or when the power plug is pulled Dwjdpfsqctp Sox Ai Eod incl. production of a mounting adapter plate - Used, as seen -

Condition: good (used), NHH lathe Type: 1N611N Turning diameter bed: 260 mm Turning diameter support: 160 mm Spindle bore: 26 mm Turning lenght: 600 mm Dsdpfx Aijqgdkio Ejwd Digital measurement Diameter faceplate: 155 mm Speed: 2000 RPM Dimensions: 150x85x155 cm LxWxH

Condition: reconditioned (used), Year of construction: 1986, Graver grinding machine Make: Deckel Dedpsqctniefx Ai Eowd Model: S0E Year of manufacture: 1986 - overhauled, repainted RAL7035 light grey / RAL7012 basalt grey Mach. no.: 86-5751 with guarantee Accessories: - Machine stand - Integrated dust extraction - Grinding wheel with flange - Pulling tool - Operating instructions Incl. installation of an on/off switch with undervoltage release to implement restart protection e.g. in the event of a power failure or when the power plug is pulled incl. production of a mounting adapter plate Used as seen The machine is technically compliant with the state of the art at the time of manufacture.

Condition: reconditioned (used), Year of construction: 1988, Graver grinding machine Make: Deckel Model: S0E Year of manufacture: 1988 - overhauled, repainted Djdpfxjlxpfmj Ai Eswd RAL7035 light grey / RAL7012 basalt grey Machine no.: 88-6730 Guarantee: 12 months single shift from delivery For machines located outside of our Northern Bavarian sales area, the travel costs are to be borne by the customer. Accessories: - Machine stand - Integrated dust extraction - Grinding wheel with flange - Pulling tool - Operating instructions Incl. installation of an on/off switch with undervoltage release to implement restart protection e.g. in the event of a power failure or pulling the power plug incl. production of a mounting adapter plate Used as seen The machine is technically corresponding to the state of the year it was built.

Condition: new, swing diameter: 400turning length: 1000speed range: 70 - 2.000 min¯¹weight approx.: 500 Dedjd Eaukjpfx Ai Eewd

Condition: excellent (used), Special accessories for DECKEL SO + SOE tool grinding machines: - 1 milling cutter special holder in very good condition o for grinding shank milling cutters with a diameter of 16 – 25 mm and with a Morse taper socket MK 1, MK 2 + MK 3 o Milling cutters with a shank diameter of 25 mm can be directly inserted o Through-hole max. 25 mm Price: €950.00 net - New collets for milling cutter special holder: - 1 set of collets for milling cutter special holder, inner diameter Ø 16, 18 and 20 mm, price: €129.00/piece net - 1 set of collets for milling cutter special holder, inner square □ 8, 10 + 12 mm, price: €145.00/piece net - 1 set of Morse taper sockets MK 1, MK 2 + MK 3, price: €245.00/piece Dwedpfx Ajctyh Uji Eed - New cup grinding wheel Ø 80 mm, price: €40.00/piece net - 1 brand new knurled nut for clamping collets with a saw thread S 20 x 2, price: €99.00 + €12.80 shipping net All of the above prices are net prices plus statutory VAT. Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: used, machine/vehicle number: 91-7529, with machine light Dodpfez Nhmaox Ai Eowd

Condition: excellent (used), Year of construction: 1972, functionality: fully functional, We are offering this machine for sale. It is connected and can be tested under power. A video of the machine can be sent via WhatsApp. Centre height above bed: 1,250 mm Maximum swing diameter over cross slide: 2,000 mm Maximum swing diameter over bed: 2,500 mm Dwedpfxev Spvmo Ai Eod Maximum workpiece weight between centres without supports: 80 t Bed height: 700 mm Bed width: 3,000 mm Distance between centres: 7,000 mm Machine weight: approx. 160,000 kg

Condition: used, Drills Grinding Machine DECKEL SOE Spindle speed: 4500 RPM Maxi bore of clamps: 17,5 mm Maxi sharpenable radius: 10 mm Maxi lateral displacement: 10 mm Angle adjustment: 45° Maxi displacement: 100 mm (see technical details) Delivred with 1 set of clamps + different diamond grinding wheels Voltage: 380 V Width: 600 mm Depth: 600 mm Dwjdpjz H Iwfofx Ai Esd Total height: 1300 mm Weight: approx 150 kg

Condition: good (used), Year of construction: 1977, functionality: fully functional, Deckel SOE tool grinder with accessories Technical data: >> Machine no. SOE 77-3997 Year built 1977 >> Motor speed 2800 rpm >> Grinding spindle speed 4500 rpm >> Motor power: 0.55 kW / 380 Volt Dwjdpfx Aiewrm Nvs Eod >> Weight approx. 200 KG Accessories and equipment: >> Collets >> Grinding wheels >> Machine stand / base >> Dressing device >> Tools >> Grinding dust extraction About the machine: Offered is a Deckel SOE tool grinder with accessories. Mechanically and electrically tested. A beautiful and fully functional machine. Take the opportunity to view and try out this machine under power on site.

Condition: excellent (used), Year of construction: 1992, Universal tool grinder Michael Deckel S11 very good condition !!! Technical data: >> Year of manufacture 1992 >> serial no. 1651 Djdpjm E T Anjfx Ai Eowd Clamping range : >> Clamping area of the tool slide 500 x 180mm >> Max. tool diameter between centers 130mm >> Max. Max. tool diameter with flying clamping in universal dividing head 620mm >> Max. Tool length between centers 270mm >> T-slots machine stand 12mm >> T-slots grinding head, tool slide and accessories 8mm Range of motion: >> Working paths grinding stroke 190mm grinding stroke during swirl grinding 190mm cross adjustment tool slide 100mm vertical adjustment grinding head 325mm longitudinal adjustment grinding spindle 5mm >> Coarse adjustment travel tool carrier 220mm Grinding head carrier 800mm Universal dividing head on tool slide 330mm >> Swivel angle Grinding head carrier 360 degrees Grinding head 360 degrees Tool carrier 360 degrees grinding spindle: Three-phase drive motor 1.1KW at 2800 rpm Spindle speed, stepless 2000 to 10000 rpm Max. Grinding wheel diameter 125mm Max. Cutting disc diameter 200mm Djduu2 Dimensions: Weight 520 Kg Dimensions ( depth x width x height ) 800 x 1100 x 1760mm Space requirement ( including operation ) 2,5 x 2,3 m Accessories and equipment: >> Opto-electronic measuring device with microscope and digital display >> Radius grinding device SK40 >> Handwheel device for tool slide >> Suction device >> Machine lamp To the machine : Offered is a universal tool grinding machine of the brand Michael Deckel S11. The machine is suitable for grinding high-precision parts. With the S11, individual parts and small batches are ground amazingly fast, economical and flexible and with the highest ease of use. The Deckel S11 is in very good condition. Mechanically and electrically tested. Take the opportunity to inspect and try out this machine on site under power.

Condition: good (used), Year of construction: 1995, Deckel SOE tool grinding machine, manufactured in 1995. Accessories: collets, various grinding wheels. In good, operational condition. Dodpfx Aiezx Rwuo Eewd

Condition: excellent (used), Tool grinder, grinding machine, angle grinder, turning tool grinder, thread drill grinding machine, milling cutter grinding machine, surface grinder, drill grinding machine, bench grinder, double bench grinder, tool grinding machine -Manufacturer: Deckel tool grinding machine type SOE -Number of collets: 48 pieces -Motor power: 0.55 kW -Speed: 2800 rpm -Grinding discs: Ø 100 mm -Grinding length: 90 mm Dwsdpfxjy Ifc Tj Ai Eed -Largest grinding angle: 180° -Largest grindable radius: 10 mm -Coarse displacement: 100 mm -Fine adjustment: 15 mm -Swivel capability of the partial head carrier: 90° -Fine adjustment of the dividing head slide: 12 mm -Height from pipe guide center to grinding spindle center: 140 mm -Dimensions: 430/530/H1200 mm -Weight: 131 kg

Condition: good (used), Year of construction: 1969, Work table Clamping area 500 x 200 mm Distance between milling spindle and work table 300 mm Dwedpoidckfjfx Ai Eod Longitudinal movement of the table (manual) 300 mm Lateral movement of the table (manual) 160 mm Template table Template table 550 x 324 mm Distance between pantograph arm and clamping area 20 mm Rotatable 360° Template grooves 7 pcs., spacing 45 mm Milling spindle Spindle speeds 1,900 – 15,000 rpm Cutting speed 1 – 226 m/min Motor speed 2,800 rpm Internal taper of the tool spindle 1:5 Size of the collet bore 6 mm Adjustability of the spindle 1 mm fine, 3 mm coarse Pantograph Transmission ratio 1:1 to 1:50 Drive power 0.2 kW Dimensions Footprint L x W x H 1400 x 1000 x 1420 mm Weight 260 kg Accessories / Special features: • 1 set of letter and number dies • Stylus Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: ready for operation (used), Deckel SOE Cutter Grinder Maximum grinding length: 90 mm Maximum grindable angle: 180° Maximum grindable radius: 10 mm Coarse traverse: 100 mm Fine adjustment: 15 mm Swiveling range of the indexing head carrier: 90° Coarse adjustment of indexing slide: 40 mm Fine adjustment of indexing slide: 12 mm Height from center of tube guide to center of grinding spindle: 140 mm Wheel size: 100 x 50 x 20 mm You are welcome to arrange a viewing. A proper invoice will be issued. For foreign customers, a net invoice can also be provided. A valid VAT identification number is required. Subject to prior sale. Should you have any questions, please feel free to contact us by phone. The telephone number can be found at the very bottom of the item page in the imprint/legal information of the seller. Visit our shop and take a look at our other offers as well. The specified company names and trademarks are the property of their respective owners and are used for identification and description purposes only. The installation and electrical connection of the machine/device must be carried out or inspected by a qualified professional. Technical data deviations and errors in the description may occur and are subject to change. Dedpfxjxyv Axj Ai Ejwd Shipping is carried out exclusively to commercial customers – private consumers can only collect in person.