Cut-off machine

Degen TAM 25/600

Condition: refurbished (used), Year of construction: 2025, Function Ksdpofig I Nofx Ab Tswu The TAM 25/600 cuts off and face-grinds ejector pins, core-pins and punching-dies precisely within seconds! Workpieces from .032 to 1“ diameter, high speed steel or thungsten-carbide can be cut easily. Just insert the workpiece into the quick acting chuck, adjust to desired length and cut it at once. Optional there is an auxiliary chuck for very thin, short or stepped pins. Your advantages: • Quick acting chuck easy to use • Rapid insert and remove of workpieces • Cut-off and face-grind in one clamping • Auxiliary chuck for very thin, short or stepped pins After cutting off the work piece move it to end position, snap in lock-pin and measure it by a micrometer. Now finish workpiece to specified size by advancing the fixture using the micrometer screw. To dress the grinding wheel move grinding spindle forward. It will now be dressed automatically by the integrated dressing- diamond. This will leave the micrometer screw at 0-position at all times. Your advantages: • Precision advance of workpiece through micrometer-screw • Integrated dressing diamond for grinding-wheel • Water-cooled cutting and grinding in standard equipment • Adjustable grinding spindle to maintain zero "0" - position setting between cut-off and grinding-spindle The precision Drive motor 1,1 KW 400 V 1,2 HP 220 – 440 V Cut-off-spindle 11000 rpm 11000 rpm Grinding-spindle 4400 rpm 4400 rpm Cut-off-diameter limits 0.5 – 25mm 0.032 to 1“ Cut-off-length limits 600 mm 23 – 5/8“ Cut-off wheel 125 x 1.0 x 20 mm 5“ x 0.04 x 20 mm bore Grinding wheel 100 x 50 x 20 mm 4“ x 2“ x 20 mm bore Base dimensions 700 x 500 mm 27 – 1/2“ x 19 – 5/8“ Net weight Kg 135

Condition: used, Year of construction: 2002, Technical details: turning diameter: 475 mm turning length: 1500 mm control: HEIDENHAIN MANUAL PLUS 4110 turning diameter over slide: 260 mm turning speeds: 3000 U/min turret head: 12 Pos. spindle bore: 78 mm quill stroke: 120 mm weight of the machine ca.: 3,1 t dimensions of the machine ca.: 3,2 x 2 x 1,9 m SAUTER turret 12 pos. , VDI 30 Kedjxhqqmspfx Ab Tswu chipconveyor, 4-jaw chuck approx. 74.000h "machine on" *

Condition: good (used), Year of construction: 2009, Ref. -No.: 10556 Manufacturer: DMG MORI Type: DMC 60 FD Year of construction: 2009 Type of control: CNC Control: Siemens 840DSL-721 Storage location: Halberstadt Country of origin: Germany X-Travel: 630 mm Y-Travel: 800 mm Z-Travel: 850 mm Max. Workpiece diameter: 600 mm Max. Workpiece Weight: 400 kg Turning Speeds: 12000 RPM Tool changer: 60 Max. Workpiece height: 500 mm Weight Of The Machine Ca.: 10 t Numbers Of Pallets: 2 Motor spindle: 24000 RPM Further information: - Internal cooling - Swivel range of the B-axis -5/ +110° - Cooled table console, table bearings and motors - Cooled bearing blocks and spindle nuts of the ball screw drives - Cooled guides in the linear axes X/Y/Z - Drive power: 100%ED/40%ED 24 KW/35 KW - Chip conveyor - Internal coolant supply - Electric handwheel - Rotary function Rotary table - Operating mode 4 - 2 pallets ø 630 mm - Rotary pallet changer - IKZ 40bar , 980 liters, paper belt filter - Dsc Htetzywvjlwwxokp - Measuring probe Heidenhain - 3D Quickset Kwodpfoxc Tt Tjx Ab Teu Machine can be inspected under power by arrangement.

Condition: reconditioned (used), Year of construction: 1992, functionality: fully functional, center height: 150 mm, grinding length: 620 mm, center width: 680 mm, grinding wheel diameter: 350 mm, total width: 500 mm, Condition of the machine: The machine is currently in a used, non-overhauled condition. The following work carried out on the machine: Kjdorz Nflopfx Ab Towu - Complete disassembly of the entire machine except for the guides - Replacement of all sealing and wear parts of the entire machine - Replacement of the infeed spindle of the X-axis - Replacement of the main bearing of the workpiece spindle - Replacement of grinding spindle - All machine assemblies are restored to as-new condition Geometry: - Scraping of the X-axis guide - Scraping the Z-axis guide - Grinding the X-axis table - Grinding the Z-axis table - Grinding the upper tables - Grinding of the assembly housing (workpiece headstock, grinding headstock and tailstock) - Creation of measurement report for TSCHUDIN cylindrical grinding machine Painting: The main assemblies are repainted, the rest of the machine retains the original paintwork Electronics: The complete electronics of the machine are checked, tested and defective switches and cables are replaced

Condition: excellent (used), Here we offer you a Zwick / Roell tensile testing machine table-top testing machine.Zwick / Roell material testing machine BDO-FB0.5TH load in tensile / compression direction 500 N height 1565 mm , width 292 mm , depth 469 mmwidth of the test surface: infiniteTest range depth: 100 mmMax working stroke w.o. Accessories 1266 mmPC or printer interface RS 232Required PC connection (for PC operation) COM 1Performance data: 115/230 V (PH, N, PE)Rated power : 0.4 kVAN power frequency: 50/60 HzWeight: 47 kgType: BDO-FB0.5THCondition: used / usedScope supplied: (See picture)(Changes and errors in the technical data, details reserved!)We will be happy to answer any further questions you may have on the phone. Kodpfjd Sr S Iox Ab Tewu

Condition: good (used), Year of construction: 2016, machine/vehicle number: PRJ052353, Offer 25490 Technical Data: - Drilling capacity in steel ST 60: 40 mm - Drilling performance in steel ST 60: 50 mm - Drill spindle taper: MK 4 - Drill spindle stroke: 160 mm - Digital speed display - Throat depth: 300 mm - Swivel table with vice: 440 x 440 mm Kwsdpsxy Hp Aefx Ab Tou - Column diameter: 145 mm - Electromagnetic feeds: 0.1 – 0.2 – 0.3 – 0.4 mm/rev - Infinitely variable drill spindle speeds with digital readout: 200 – 3200 rpm - Drive: 400 V / 1.8 / 2.9 kW - Lighting - Electrical foot switch - Required space (approx.): W 650 x H 1900 x D 800 mm - Weight (approx.): 470 kg

Condition: excellent (used), Year of construction: 2018, operating hours: 21,000 h, functionality: fully functional, machine/vehicle number: S4E184001, turning diameter over cross slide: 430 mm, turning length: 670 mm, turning diameter: 220 mm, spindle bore: 45 mm, spindle speed (max.): 6,300 rpm, overall weight: 4,300 kg, Used CNC hard turning lathe with counter spindle Manufacturer: EMCO Model: Emcoturn 45E Year of manufacture: 2018 Few operating hours Control: Siemens 828D Kwedpfxsw Rrvwj Ab Tou Number of tools: 12 driven units Max. speed: 0-6000 rpm

Condition: used, Year of construction: 2008, operating hours: 5,900 h, travel distance X-axis: 350 mm, travel distance Y-axis: 220 mm, travel distance Z-axis: 220 mm, Wire Diameter 0,1-0,3 mm Automatik Threading Working Hours 5900 Std Verfahrwege X 350 mm Y 220 mm Kwsdewzyr Aspfx Ab Tou Z 220 mm U 350 mm V 220 mm Year 2008

Condition: new, Extraction capacity of filter unit at spigot*: 350 m³/h Total power consumption*: 0.09 kW Operating voltage: 230 V, 50/60 Hz, 1PH + N + PE Noise level*: 52 db(A) Dimensions L/W/H in mm: L 329 / W 374 /H 510 Colour: RAL 7035 Weight: 25 kg Manufacturer: ISI Industrieprodukte GmbH *Depending on the filter equipment Special voltage or special colour on request Application: Extraction of oil mist and smoke, for small to very large machine workrooms. Your advantages of the ELBARON series: - 18 unit variants available - Direct from the manufacturer - ISI-TRONIC as standard (digitalised filter control) - Electronically controlled EC fan as standard - Speed and air flow rate adjustable - Simplex (single-stage) or duplex (two-stage) available - Wide range of air flow rates available - Adaptable to pollutant load and air performance requirements - Large range of mounting and connection accessories - Quality Made in Germany We have developed the ELBARON® filter series for use in machining operations with pure oil or for separating oil mist and smoke. For many years now, the digital electrostatic air filters of the ELBARON® series have been among the most efficient filter units on the market and are in use worldwide. Our filter units are already digitalised as standard and can be controlled, for example, using a laptop. The ELBARON® unit series comprises 18 unit variants and can be optimally designed for your application in terms of size and performance. ELBARON® units impress with their long service life and absolute functional reliability. Our electrostatic filter cells are dimensioned in such a way that the best possible filter efficiencies, service lives and trouble-free operation are achieved under economic aspects. Kjdpfx Ash Rdwxob Towu

Condition: used, Intake opening: 1.200 x 1.600 mm Motor power: 110 kW, without gearbox Rotor flight circle: 380 mm Rotor speed: approx. 470 rpm Cutting system: 66 cutting inserts on toolholder Kedpfxobq Stqj Ab Tjwu Screen: reinforced screencage, 15 mm perforation Counter knife: with mechanical adjustment device Machine weight: approx. 5.900 kg