Wood shredder

Disc chipper Bruks

Condition: like new (used), functionality: fully functional, Year of construction: 2025, operating hours: 55 h, Machine with special rotor available immediately Advantages: + special rotor with reduced blade overhang, suitable for hard and soft materials + 22 kW motor Bwjdpfex Af Rdox Acwon + effective square blades *for pallets: up to a maximum of 10 pallets per hour *dependent on screen size and material. With smaller wood residues, significantly more. Motor: 22 kW; 400 V - 50 Hz - 3 phase, Screen: 15/20 mm or as agreed (10 to 40 mm possible) hydraulically operated slide Screen opening currently (15/20 mm) *can be exchanged Extraction nozzle Ø 200 mm. Feed opening 1000x1000 mm Dimensions: 2000x1800x1645mm Example image above: color of the system may vary Weight: 1920 kg. Included as standard: - Control cabinet with PLC control - automatic star/delta start - fast hydraulics - auto. OFF when the rotor is idle - speed 70-90 rpm for high throughput - cycle control to avoid idle times - performance-enhancing step control of the hydraulic slide - Pertinax guides for hydraulic slide - vibration-damping machine feet - CE compliant The following options are available at an extra cost: - Raise shredder by 30 cm (preparation for conveyor belt) + €2,480 net - Inclined conveyor belt (discharge height approx. 220 cm) + €12,980 net - Overband magnet + €6,980 net - Control for conveyor belt and overband magnet + €2,750 net (Start and stop synchronized with the shredder) - extended feed hopper 1500x1500 mm + €3,480 net Requirements for the raw material: - The moisture content (as received) must be below 25% - The feed must be free of metals and mineral contaminants. Damage to the tools and/or increased wear may result.

Condition: good (used), Year of construction: 2001, functionality: fully functional, Used pellet mill OGM 1,5 with 75 kw main engine. Capacity from wood about 1 tone/hour. Include a lot of spare part: - new ring die 6mm for wood: Salmatec Brand ( price from manufactory 2700 eur for 1). Bwodpjx R Suzsfx Acwsn - New bearing for roller 10 pcs. - New roller shell 10 pcs. - other spare parts, main axhis, plates for rolles.

Condition: used, Year of construction: 2006, functionality: fully functional, Complete briquetting line 2 x RUF 330. Boiler room, drum dryer, conveyors. Bwsdpfxoxazhte Acwen

Condition: ready for operation (used), functionality: fully functional, LINDNER wood chipper for sawmill offcuts, model T 400/140-2 – after technical inspection – in very good condition – suitable for producing technological wood chips TECHNICAL SPECIFICATIONS: infeed width: 400 mm infeed height: 140 mm rotor diameter: 450 mm rotor length: 400 mm Bwedor Ak Rgspfx Acwsn main motor power: 33 kW infeed motors power: 2 x 1.5 kW number of knives: 2 pieces screen dimensions: 60 mm x 90 mm infeed rollers in very good condition feeder motor power: 1.5 kW feeder length: 4,200 mm transport dimensions (L/W/H): 430 / 240 / 150 cm weight: approx. 2,000 kg

Condition: new, Year of construction: 2025, the SQUALO 615 multi-blade or multi-blade circular saw with single shaft is a technological machine, indispensable in a modern sawmill to optimize the production of sawn timber. moreover it is 2-in-1 as it can be configured as a trimming machine with 1 or more movable blades. Bodpfxshpbxis Acwown ideal for the production of strips, squares, sawn timber, profiles, edged planks, prisms, boards, elements for pallets. Rollers / conveyor belt width 620 mm Width of infeed / outfeed conveyor rollers 620/720 mm Max saw unit width 590 mm Max cutting height (without pad) mm 150 (mm 125 Trimming machine) Min. Length working mm 800 Max width passage 800 mm Blades hole diameter mm 80 (mm 104 Trimming machine) Circular blades diameter 250/470 mm (480 mm Trimming machine) Blade shaft speed rpm 3.800 Variable feed speed with ROLLS 3 - 36 m / min Variable feed speed with CARPET m / min 4 - 25 optional: softstarter start

Condition: used, Year of construction: 2003, Two-way excavator designed for loosening excavated material for storage or transport. The machine is used in the following works: - on railway and tram tracks Bwsdpfx Acohutkfewon - maintenance and track-related works - earth and road works Manufacturer: ATLAS Model: 1604 KZW Year of production: 2003 Own weight: 22,000 kg Dimensions: 5.9x2.5 m, h: 3.0 m Engine power: 90 kW Equipment: - air conditioning - Webasto heating - three-fold arm - front and rear hitch - additional output for a pneumatic hammer - reversing camera - four hydraulic side supports - Joystick control Technical condition: used, functional

Condition: ready for operation (used), Drum chipper type Bruks type 1202 CS6 for production of high quality pulp chips from bulky mixed waste such as: Edgings, slabs, trim ends, plywood, veneer and joinery waste and log tops. The chipper can produce pulp and board chips, or fuel chips. Capacity up to 50 m3 chips per hour With bigger electrical motor up to 100 m3 of chips per hour Bodpfx Acouhvhpjwewn Electrical motor 75 kW

Condition: used, Year of construction: 2012, Transverse chain conveyor with 4 units, length 6 m Log loading cradles with singulation connecting rods, 4 units Mobile cutter debarker with mechanical arm, min/max log length 1000/6000 mm, min/max log diameter 200/1100 mm Paddle chain waste removal conveyor, width 600 mm, length 10 m, ascending Bwedpfoyappaex Acwon Installed power: 35.2 kW Compressed air consumption: 100 NL/1' Cutter width: 300 mm

Condition: excellent (used), Year of construction: 2006, Specifications : Overall Length 54' 6" travel, 64' 10" operation Height 13' 2" Width 10' 10" Weight 94,000–108,000 pounds Top Feed Roll Motor - High-torque Poclain Bottom Feed Roll Motor - High-torque Brevini planetary with Char-Lynn hydraulic motor Feed Conveyor - 440 belt or chain Length - 16' standard; 20' optional Width - 60" Motor - High-torque Brevini planetary with Char-Lynn hydraulic motor Discharge Conveyor Length - 50' 0" Width - 60" Discharge height - 17' Motor - High-torque Char-Lynn Bwjdpexd D Nhjfx Acwen Engine Standard: CAT C-27, 1050 hp; PT Tech HPTO 15 clutch Option: CAT C-32,1200 hp; PT Tech HPTO 21 clutch Drive V-belt complete; 12-14-groove, 8-V banded belts with guard Flexaire Fan Reversing pitch radiator fan that reverses airflow every 5-15 minutes automatically (adjustable)

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, saw drive: 6,000 W, Industrial Crosscut Saw – Precision in Every Cut • Manual operation • Automatic infeed roller conveyor • Infeed length: 5.5 m • Outfeed length: 3 m • Laser dimension indicator Model: o Wravor 700 B Motor power: o 6 kW Applications: o industrial wood processing o carpentry o pallets o beams o solid wood cutting Bwjdpfx Aex Hqn Escwen Input power type: o three-phase