Tool kit for machine servicing

Divers

Condition: used, lot of debite machines moulders hydraulic shovel 27t and 42t polisher capacity 600mm to 2000mm vertical and horizontal slitter block size 2000 x 1800 3-point shovel etc. approx. 300 tons Gbodpfx Ajncfpbjl Uou negotiation on site always in French, English by appointment or by e-mail translator

Year of construction: 2005, condition: ready for operation (used), A lathe (Universal Turning Solution) is offered, control: Fanuc, tool turret: 12-station, tailstock, 3-jaw chuck. Tool setting arm: Renishaw HPRA. Inspection is possible by arrangement. Gbsdpfjx I Rpxjx Al Ueu

Condition: excellent (used), diverse vices as shown in attached pictures Godpfsfr T N Rox Al Ujbu

Condition: good (used), Year of construction: 1996, functionality: fully functional, Work area: 800x600x500 Rapid traverse rate: 30 m/min Spindle speed: 15000 RPM, SK40 NC rotary table, diameter = 280 mm Electronic handwheel module Electrical thermal expansion compensation Gedozv Syfopfx Al Ujbu Ethernet interface, TNC 426/430 Measuring probe system, SK40, Renishaw Chip conveyor without chip cart Enclosed cabin roof section Air blow-off device, C800 The spindle was replaced in May 2018 with a total operating time of 25,185 hours. The current operating time is 31,083 hours. This means that the spindle has been in operation for 5,898 hours since its replacement.

Condition: excellent (used), Year of construction: 2006, • Configuration: 3 linear axes (X/Y/Z) + B-axis tilting head • Travels (X/Y/Z): 2,500 / 920 / 820 mm • Table: 3.100 × 900 mm · max load 3.000 kg • Spindle: 20–18.000 rpm · HSK-A63 · 35/25 kW • Rapids: X 100 m/min · Y/Z 60 m/min • Tool magazine: 120 tools • Control: HEIDENHAIN iTNC 530 Gbjdpsy Skmrsfx Al Ueu Brand new Spindle installed as end of April 2026

Condition: good (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 28820005482, travel distance X-axis: 1,000 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 500 mm, feed rate X-axis: 50 m/min, feed rate Y-axis: 50 m/min, feed rate Z-axis: 50 m/min, rapid traverse X-axis: 50 m/min, rapid traverse Y-axis: 50 m/min, rapid traverse Z-axis: 50 m/min, Equipment: documentation/manual, Dear Sir or Madam, We are selling a DMC 100 V hi-dyn machining center in good condition. Unfortunately, the year of manufacture is not written down, but we suspect it was 2001. Please see the pictures for further details; we are of course happy to answer any questions you may have. The system can be viewed with power on. The buyer must organize collection with a suitable truck. The system can be dismantled and removed by either the buyer or us (for an additional fee of €1,500). Gjdpfx Aovx N Shjl Uebu

Condition: excellent (used), Year of construction: 2009, Hwacheon Cutex 160, Year 2009 CNC Control Fanuc OT i 12-station turret LNS bar feeder (max. bar diameter 42 mm) Tool package (including driven tool holders) Chip conveyor Tailstock Technical data: Swing diameter over bed: 550 mm Max. turning diameter: 300 mm Max. turning length: 300 mm X-axis travel: 170 mm Z-axis travel: 335 mm C-axis Max. bar capacity: 45 mm Spindle speed: 6000 rpm Turret: 12 stations Rapid traverse X: 36 m/min Godpfxjyc Nrys Al Usbu Rapid traverse Z: 36 m/min Drive power: 20 kW Machine weight approx.: 3200 kg

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: EC1606, grinding length: 1,200 mm, grinding width: 500 mm, grinding wheel diameter: 400 mm, distance table to spindle center: 700 mm, grinding wheel width: 50 mm, overall weight: 6,100 kg, grinding spindle speed: 1,500 rpm, space requirement height: 2,600 mm, space requirement length: 4,600 mm, space requirement width: 2,200 mm, Like-new, lightly used surface grinder. In very good condition. Gbodpfxey Rxuhs Al Uou Includes digital display on the Y-axis (SINO SDS6).

Condition: excellent (used), Year of construction: 2012, Control: Fanuc 0i-TD Equipment: - various tool holders - various driven tools - C-axis, driven tools Max. turning diameter: Ø 500 mm Max. turning length: 600 mm Bar capacity: Ø 75.5 mm Spindle speed: 3500 rpm Spindle nose: A2 - 8 Gbodpsy Dqb Tefx Al Ueu Machine weight: 6,700 kg

Year of construction: 2015, condition: ready for operation (used), A CNC milling machine Spinner is available. Travel X/Y/Z: 760mm/460mm/460mm, table dimensions X/Y: 900mm/410mm, max workpiece weight: 350kg, tool stations: 24, max tool weight: 8kg, max tool length: 200mm, speed: 12000rpm, max tool diameter: 80mm, tool holder: SK40. Machine dimensions X/Y/Z: approx. 2600mm/1600mm/2850mm, weight: approx. 4000kg. Including automation and robot M10. Documentation available. An on site inspection is possible. Gedpfx Ajxwn I Uel Ujbu