BAZ with swivel head / TNC-430 / 3D Probe

DMG DMU 80P

Condition: used, Year of construction: 2009, x-travel 800 mm y-travel 800 mm z-travel 800 mm control iTNC 530 Heidenhain Gedsu Ag Irjpfx Ag Tjbg Speed Mainspindle 50 - 18.000 min/-1 power capacity - main spindel 28 kW max. Torque 121 Nm tool taper HSK-A 63 Swivel range -30 / +180 ° table surface area dia. 900 x 700 mm max. table load 1.400 kg table speed 30 min/-1 rotatable C: 360 ° number of toolpositions 40 pos. tool taper HSK-A 63 max. tool diameter 230 mm max. tool length 450 mm max. tool weight 15,0 kg rapid traverse ( X / Y / Z ) 60 m/min Feed force ( X / Y / Z ) 13 / 13 / 9 kN weight of the machine ca. 13,0 t dimensions of the machine ca. 5,5 x 3,5 x 3,5 m total power requirement 68 kVA 5 Axis Machining Center - Universal DMG DECKEL MAHO - DMU 80 P duoBLOCK - Swivel-Milling-Head (B-Axis) - NC-Rotary Table (C-Axis) - Application Tuning Cycle ATC - WITHOUT clamping devices

Condition: new, thread dia. M6 - M24 mm Gjdpfjg N Nl Djx Ag Tebg turning speeds 200 U/min radius 1200 mm angle adjustable from - to 0 - 90 Grad weight of the machine ca. 0,4 t dimensions of the machine ca. 1,4 x 0,1 x 0,7 m Electric tapping machine / 4450124SET Fast and precise thread cutting with freely positionable swivel arm - The machine head can be swiveled from 0 to 90 degrees - Quick change chuck with slip clutch for safe thread cutting without Risk of breakage - Right-left rotation can be selected on the machine head - Setting the parameters via touch display on the swivel arm - Both manual and automatic switching from forward to backward to reaching the entered Incl. 1 each GT24 M6, M8, M10, M12, M14, M16, M18, M20, M22-24 tapping chuck Substructure 900 x 600 x 875 mm

Condition: excellent (used), Year of construction: 2006, operating hours: 32,000 h, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 60 m/min, feed rate X-axis: 15 m/min, feed rate Y-axis: 15 m/min, feed rate Z-axis: 15 m/min, torque: 121 Nm, controller manufacturer: Siemens, table width: 700 mm, table length: 900 mm, table load: 1,400 kg, rotational speed (min.): 20 rpm, rotational speed (max.): 18,000 rpm, spindle speed (max.): 18,000 rpm, operating hours of spindle: 32,000 h, coolant supply: 40 bar, spindle nose: HSK63A, number of slots in tool magazine: 30, tool length: 350 mm, tool diameter: 100 mm, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, DMG MORI DMU 80P duoBlock Year of manufacture: 2006 Operating hours: 62,000 h Spindle hours: 31,000 h Function tested and cleaned Gedpfxew Ht Ibo Ag Tsbg Maintenance performed according to manufacturer's specifications Geometry within new machine tolerance Equipment: 5 axes Swivel head (controlled B-axis) Direct linear measurement in X/Y/Z (glass scales) Chip conveyor Extraction system NC rotary table Tool magazine with 30 positions Heidenhain touch probe BLUM laser Handwheel Rotating viewing window ICS 40 bar (internal coolant supply) Chip flushing Operating mode 4

Condition: ready for operation (used), Year of construction: 2006, Heidenhain Millplus CNC WORKING AREA: Longitudinal travel X: 800 mm Transverse travel Y: 800 mm Vertical stroke Z: 800 mm PROGRESS: Gsdpfx Agowkh Aho Tsbg Feed X, Y, Z: 60,000 mm/min Rapid traverse X, Y, Z: 60 m/min SPINDLE: Spindle taper: HSK 63 Spindle speed: 18,000 rpm TABLE: Workpiece support area: 900 x 700 mm TOOL STORAGE: Storage locations: 180 positions Machine complete with: • Renishaw probe • Tool presetting • 40 bar high pressure with paper filter

Condition: used, Year of construction: 2001, functionality: fully functional, machine/vehicle number: 124, Price upon request Godpfswl An Ijx Ag Tebg Used CNC Vertical Lathe Manufacturer MORI SEIKI Model VL 55 Year of manufacture 2001 With MSC 518 CNC control, 12-tool turret, and chip conveyor Turning length = 653 mm Turning diameter = 550 mm X-axis = 350 mm Z-axis = 660 mm Speed up to = 2000 rpm Spindle power = 30 kW Approx. weight = 12.5 t Price upon request Specifications: Used CNC Vertical Lathe Manufacturer MORI SEIKI Model VL 55 YOM 2001 With MSC 518 CNC control, 12-tool turret, and chip conveyor Turning dia. = 550mm Turning length = 653 mm X-Axis = 350mm Z – Axis = 660 mm Speed = 2000 rpm Spindle power = 30 kW Weight approx.. = 12.5 t

Condition: as good as new (ex-display), Year of construction: 2017, operating hours: 132 h, functionality: fully functional, machine/vehicle number: 20731, travel distance X-axis: 500 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 300 mm, rapid traverse X-axis: 90 m/min, rapid traverse Y-axis: 90 m/min, rapid traverse Z-axis: 90 m/min, nominal power (apparent): 35 kVA, controller manufacturer: Fanuc 31I, spindle speed (max.): 42,000 rpm, operating hours of spindle: 132 h, coolant supply: 20 bar, spindle motor power: 15 W, spindle nose: HSK E40, input voltage: 415 V, type of input current: three-phase, Equipment: documentation/manual, rotational speed infinitely variable, The Machine is in perfect condition. Machining accuracy is +/-0.0015mm. (measured with zeiss micura) The machine is equipped with Renishaw OMP400 and BLUM Pico for workpiece and tool measuring. Repeating accuracy is +/-0.001 High speed and high accuracy option on Fanuc. Gsdpfxovcfi De Ag Tjbg The Machine can be inspected under power.

Year of construction: 1984, condition: ready for operation (used), Rafamet UBB 112/2 Wheel Tread Diameter Minimum 700 mm Wheel Tread Diameter Maximum 1120 mm Clamping length 540 - 1050 mm Wheelset Axle Length Minimum 1640 mm Wheelset Axle Length Maximum 2800 mm Maximum Tire Width 150 mm Maximum Wheelset Weight 4000 kg Saddle Set Up Motion Speed 2000 mm/min Saddle Feed Maximum 2000 mm/min Main Drive Motor Power 80 kW Weight aprox 40000 kg Gedohvml Ijpfx Ag Tsbg

Year of construction: 1990, condition: good (used), machine/vehicle number: 92041, table mounting size: 410 x 900 mm movements x/y/z: 560/410/380 mm spindle taper: SK 40 spindle turning speed range: 22 - 6000 rpm carriages: x/z until 10000, y until 240 mm/min space needed: 2600 x 2000 x 2300 mm Gjdpfx Aodhhpreg Tebg weight: 3500 kg

Condition: good (used), Year of construction: 2002, HEIDENHAIN TNC 430 control Spindle speed 20–9,000 rpm Travels X = 500, Y = 400, Z = 400 mm Tool holder SK 40 16-station tool changer Godpswglfxefx Ag Tebg Rotary table with B and C axes Clamping surface Ø 700 x 500 mm Max. table load 200 kg Infrared probe for workpiece measurement

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, CNC twin-spindle turning center Control: CNC path control including 19" TFT Siemens Sinumerik 840 D sl solution line with ERGOline control and with ShopTurn 3 G TECHNICAL DATA Max. turning diameter 340 mm Spindle distance 1470 mm Turning length 1135 mm Swing over bed 700 mm Swing to tool carrier 2540 mm Travel paths: X1 – Tool carrier I 270 mm Y1 – Tool carrier I 120 mm Z1 – Tool carrier I 1200 mm X2 – Tool carrier II 195 mm Y2 – Tool carrier II 80 mm Z2 – Tool carrier II 1200 mm X3 – Counter spindle slide 180 mm Z3 – Counter spindle slide 1200 mm Main spindle Integrated spindle motor ISM 102 Drive power (100/40% duty cycle) 40/48 kW Torque (100/40% duty cycle) 570/680 Nm Speed range 0-4000 rpm Bar diameter 102 mm Draw tube inner diameter 104 mm C-axis and spindle brake (angular resolution) 0.001° Counter spindle Integrated spindle motor ISM 76 Drive power (100/40% duty cycle) 25/32 kW Torque (100/40% duty cycle) 280/380 Nm Speed range 0-5000 rpm Bar diameter 65/75 mm C-axis (angular resolution) 0.001° Slide 1 Tool carrier (direct drive) Number of tools 12 Tool holder diameter VDI (DIN 69880) 40 mm Maximum power (100/40% duty cycle) 10.9/14.2 kW Maximum torque (100/40% duty cycle) 26/34 Nm Speed range 40 – 10,000 rpm Slide 2 Tool carrier (direct drive) Gsdpfx Aewcd S Njg Tsbg Number of tools 12 Tool holder diameter VDI (DIN 69880) 40 mm Maximum power (100/40% duty cycle) 10.9/14.2 kW Maximum torque (100/40% duty cycle) 26/34 Nm Speed range 40 – 10,000 rpm Slide 3 Rapid traverse speed X/Z axis 30/45 m/min Tool resolution Z axis 0.001° Feed force (40% duty cycle) X/Z axis 16/13 kN EQUIPMENT/ACCESSORIES  IRCO ILS-RBK 100/16 short-bar loader  Various main spindle reducers  NC-controlled workpiece retrieval device from both the main and counter spindles The device consists of an NC-controlled *Horizontal axis *Swivel unit *Vertical axis *2-jaw gripper for interchangeable gripper jaws  Conveyor belt for removing workpieces from the machine  8/20 bar coolant system with immersion cooler  Chip conveyor  Oil mist extraction  Control cabinet cooling unit (up to 40°)  Counter spindle slide  Easy-Tool monitor  1 collet chuck for quick-change clamping head size 100 for the main spindle  1 collet chuck for quick-change clamping head size 100, Nova Achsfix for the counter spindle  Approx. 40 various quick-change clamping heads size 100 (complete inventory)  Pneumatic tool changer, ø 100 mm  Approx. 50 various tool holders, fixed and driven (complete inventory)  Mounting elements  Documentation