DN SOLUTIONS DNM 750 II

DN SOLUTIONS DNM 750 II

Condition: new, Year of construction: 2023, functionality: fully functional, DN Solutions PUMA 5100MB – NEW, UNUSED MACHINE! Year: 2023 Gkodpfx Acjzpw Dpomsb Fanuc Oi-TF 15” control C-axis powered tool 21-inch chuck (535mm) Spindle bore: 166mm 12-position BMT75 turret Max. turning diameter: ø 650 mm Max. turning length: 952 mm Prepared for steady rest support Tailstock Tool probe CROMAR chip conveyor 12 tool holders, including 4 powered tool holders (2/2)

Condition: good (used), Year of construction: 2000, gear diameter: 449 mm, Equipped with: Fanuc 150MB CNC Control Dry Cutting Cutter Shroud Chip Evacuation System Auto Doors Hydraulic System Lubrication System Work light Stack Light Specifications: Largest Speed Ratio: 10:01 Work Area (Continuous): Largest Depth of Teeth: 15.24 mm Largest Width of Tooth Face: 50.8 mm Work Area Axis: Horizontal Movement X Axis: -114 - 178 mm Vertical Movement Y Axis: -178 - 190 mm Movement of the Carriage Baseplate Z-Axis: -10.16 - 500 mm Workpiece Headstock Swiveling Range B-Axis: -3 - 90 Degree Maximum Distance Machine Center to Spindle Side: 165 mm Number of Teeth: 5-200 Inclusive Max. Gear Pitch Dia. of Typical 35 Deg. Spiral Angle Gear Using Max. Cutter Dia. 12" Cutter at the Following Ratios: Face Milling 1 x 1 - 13.5" - 342.9mm 2 x 1 - 16.0" - 406.4mm 5 x 1 - 17.7" - 450.0mm Face Hobbing (210mm Dia. Cutter) 1 x 1 - 10.560" - 268.22mm 2 x 1 - 10.286" - 275.00mm Gksdpfjruakgjx Acmob 5 x 1 - 11.810" - 300.00mm Milling Head Diameter: Helixact: 100,125,169,200,250,320mm Continuous Gumption Procedure, Teichloroethylene: 102 - 210 mm Workpiece Spindle: Drilling of Large Diameters: 5 3/64" Cone Upward Gradient on 304.8 mm (1 Foot): 21/32" Deep One of the Cone: 5.29" Diameter of the Whole Spindle Perforating: 3.35" Speeds: B-Axle Workpiece Headstock Drag Axis: 30 Degrees A-Axle Workpiece Spindle Number of Revolutions: 0 83 min-1 X-Axis Horizontal: 80 mm/sec Y-Axis Vertically: 80 mm/sec Z-Axis Carriage Baseplate: 80 mm/sec Space Requirement L x W x H (Approximate): 4.75 x 3.40 x 2.54m / 188" x 134" x 100" Machine Weight (Approximate): 10980 kg / 24,156#

Condition: good (used), Year of construction: 2009, max. wheel diameter 1200 mm gear width 260 mm max. module 16 min. module 0,5 stroke 270 mm distance between table/spindle 920 mm taper of shaper cutter SK control Bosch MTX table diameter 900 mm Gsdpewzmpzjfx Acmokb min. workpiece diameter-at internal hobbing 1200 mm strokes - infinitely variable 50-1000 Hub/min spindle diameter 125 mm table hole 320 mm Distance of shafts Min/Max 0-820 power capacity Stosskopf 30 KW total power requirement 72 KVA weight of the machine ca. 24 t dimensions of the machine ca. 6,5x2,9x4 m Liebherr LH 90 control, 9 axis CNC, top condition.

Condition: used, Year of construction: 2007, x-travel 900 mm y-travel 300 mm z-travel 1000 mm control Siemens Sinumerik 840D max. workpiece diameter 1600 mm max. module 20 mm tip circle diameter 350 mm Milling arbour diameter 375 mm Total closing value 80 kVa weight of the machine ca. 33,5 t dimensions of the machine ca. 10,530 x 6,375 x 4,680 m Feed rate: - X-axis 1 to 3000 mm/min - Y-axis 1 to 3000 mm/min - Z-axis 1 to 4000 mm/min Spindle speeds in rpm: - Tool 26 to 265 - Workpiece table 0 to 8 Equipment/accessories: Gkodpfxow Rrb Ho Acmsb - M 2 motor milling head - Milling mandrels - Oil cooler - Technical documentation

Condition: used, Year of construction: 2012, x-travel 2100 mm y-travel 1020 mm z-travel 762 mm Control Fanuc MXP-200FP spindle speed 6000 U/min spindle capacity ca. 22 kW max. torque on the spindle ca. 550 Nm tool taper SK 50 Gedpfx Acjx Sr A Uomjkb table surface area 2300 x 1020 mm max. table load 3000 kg T-slots 6 x 22 mm T-slot - distance 150 mm 3-Axis CNC Machining Center Equipment/Accessories: - Automatic tool changer with chain magazine, 40 stations - max. tool-Ø: 120/240 mm - max. tool length: 350 mm - coolant system with internal coolant supply and filter - emulsion mist extraction - electronic handwheel - 2 pcs. magnetic clamping plates 800 x 400 mm - various tool tapers SK50 - chip conveyor

Condition: used, max. wheel diameter 0-200 mm max. module 25 min. module 0,5 Gksdpstuxa Ujfx Acmob

Condition: ready for operation (used), Year of construction: 2023, spindle motor power: 22,000 W, spindle speed (max.): 5,000 rpm, travel distance X-axis: 165 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 700 mm, total height: 2,250 mm, total width: 2,360 mm, controller manufacturer: FANUC, product length (max.): 3,880 mm, number of axes: 8, This 8-axis DN SOLUTIONS PUMA TT2100SYY was manufactured in 2023. As new, showroom model. It features a twin-spindle and twin-turret configuration, with a maximum spindle speed of 5,000 RPM and a bar capacity of 65 mm. The machine is equipped with 24 turret stations and high-rigidity linear roller guides for enhanced stability. If you are looking to get high-quality turning capabilities, consider the DN SOLUTIONS PUMA TT2100SYY turn-mill centre we have for sale. Contact us for further details. • Chuck size: 8" (204 mm) • Bar capacity: 65 mm • X1/X2 travel: 165 / 100 mm • Z1/Z2 travel: 700 / 700 mm • Y1/Y2 travel: 30 / 40 mm • Spindle motor power: 22 / 18.5 / 15 kW • Turret stations: 24 (12 + 12) • Turret interface: BMT 55 • Guideway type: High-rigidity linear roller guides • Spindle type: Integral motor spindle with wide speed range • Turret capability: Upper and lower turrets with Y-axis and 12 driven stations each • Structural design: Highly stable Y-axis design for high-volume serial production Additional equipment • Cooling and filtration: High-pressure coolant through turret; Oil skimmer • Sub-spindle features: Coolant supply through sub-spindle; Parts ejector • Parts handling: Parts catcher; Parts conveyor for both spindles • Calibration: Tool setter (auto-electric) • Automation and interfaces: Air conditioning (electrical cabinet); Bar feeder interface; 3-color tower light • Optional: Chip conveyor (hinge belt conveyor). Price on request • Machine is delivered with standard basic package: Turret fully equipped, base holder included. • Optional: • 5 pcs. External turning tool holders SQ20, BMT 55 (500-0696) • 2 pcs. Facing tool holders R/L (500-0701) • 1 pc. Double external turning tool holder HS/GS (500-0868) • 2 pcs. Double external turning tool holders HS (500-0705) • 1 pc. Parting tool holder (500-0709) • 7 pcs. Boring bar holders; BMT 55 ID 32 (500-0698) • 2 pcs. Triple internal turning tool holder GS (500-0707) • 2 pcs. Cover IK (500-0711) • 1 pc. Reducing sleeve set Boring (n/a) • 2 pcs. Reducing sleeve set OD 32 ID 20/25 (500-0710) • 1 pc. Adapter set PRECI-FLEX ER25 (BMT 55P) (500-0523) • 2 angled externally cooled external heat sinks Eppinger • 2 straight externally cooled external heat sinks Eppinger Additional Information As new, showroom model Technical Specification Gksdpsyrtbqjfx Acmob Counter Spindle Yes Driven Tools Yes

Condition: used, Year of construction: 2012, Technical details: max. wheel diameter: 260 mm Gkodsy Amllopfx Acmob gear width: 320 mm max. module: 5 weight of the machine ca.: 21 t dimensions of the machine ca.: 8,71 x 5,97 x 3,49 m no. of teeth: 1...999 max. helix angle: +45/-45 ° pitch min.: 0,1 mm pitch max.: 1000 mm X-axis: 345 mm y-axis: 250 mm Z-axis: 320 mm b-axis: 360 ° c-axis: 360 °

Condition: used, Year of construction: 2008, functionality: fully functional, travel distance X-axis: 2,050 mm, travel distance Y-axis: 850 mm, travel distance Z-axis: 800 mm, rapid traverse X-axis: 15 m/min, rapid traverse Y-axis: 15 m/min, rapid traverse Z-axis: 12 m/min, feed rate X-axis: 8 m/min, feed rate Y-axis: 8 m/min, feed rate Z-axis: 8 m/min, table width: 850 mm, table length: 2,200 mm, table load: 4,800 kg, spindle speed (min.): 10,000 rpm, distance table to spindle center: 950 mm, Equipment: chip conveyor, documentation/manual, Johnford VMC 2000 vertical machining center, CNC Heidenhain iTNC 530. X-axis – Longitudinal 2,050 mm Y-axis – Transverse 850 mm Z-axis – Vertical 800 mm Spindle-to-table distance 150-950 mm Main spindle to column distance 885 mm Table Surface 2,200x850 mm Maximum weight 4,800 kg Gedpfx Acoxdiigomekb Spindle Head Spindle taper - BT-40 (BIG PLUS System) Speed range (2) 10,000 rpm Motor HP 25 Equipped with: - Internal coolant system 20 bar - Part probe - Tool probe - Rigid tapping - Electronic handwheel - 2 longitudinal chip conveyors - Separate tank with filtration unit - Full enclosure

Condition: like new (used), Year of construction: 2020, operating hours: 9,422 h, functionality: fully functional, We are selling, on behalf of a client, a used, recent-model, like-new 5-axis machining center with a GANTRY design; model DMU 340 Gantry; year of manufacture 2020; 9422 operating hours; 2991 spindle hours. It features a SIEMENS CELOS operator interface. All specifications, technical data, or configurations of the machine are available upon request. The machine is available for demonstration and can be inspected immediately. Further original photographs are available upon request and after verification of your identity. A resale to dealers is not currently planned. Please refrain from making such inquiries. Gkedpszx Ek Ajfx Acmsb