Vessel Turning Unit

DUMETA D-HGZ-5-D

Condition: new, weight max. 5,0 t workpiece diameter 250 - 2500 mm total power requirement 0,75 kW load capacity drive unit max. 2500 kg load capacity rotating unit max. 2500 kg weight of the machine ca. 0,9 t The self-adjusting D-HGZ roller blocks adapt to the different Diameters of your workpieces yourself. This roller block is for special designed for heavy-duty activities. Furthermore, this roller block is for Suitable for thin-walled workpieces, as the four wheels per unit are an improved Supply pressure distribution. || Features: | - Electronic components of Top quality | - Infinitely adjustable speed of the drive unit | - Wheels fitted with solid rubber tires enclosed in one Steel construction | - Heavy construction enables very high stability. | - Favorable price-performance ratio enables quick recovery Your investment. | - The D-HGZ series is supplied as a standard version and includes a remote control with digital reading. || Accessories: | - double Iodpfx Asgvkpfjd Roat Foot pedal (start-stop / left-right) | - remote control

Condition: used, Year of construction: 1987, pressure / t stroke / mm table-size / mm weight of the machine ca. 65000 kg Iedpfx Aouddcajd Reat Make: Shepherd Type: SVRM 4-roller bending machine: Year of construction: 1986 Working width: 3000cm Smallest pipe diameter with 600 mm roller: Ø 720 mm Smallest tube diameter with 360 mm roller: Ø 460 mm Sheet thickness up to (depending on the material): 50 mm Material SA- 738 B Working width: 2500 mm Material SA- 738 B Material thickness: 35 mm conical bending: Except for the top roller, all rollers can be moved in an inclined position for conical bending. The roller positions can be read on display instruments. For semi-automatic or fully automatic operation of the machine, the bearing jewels of the rollers are equipped with scale bars and slide cams for limit switch actuation. This allows the rollers to return to the same set position over and over again, giving a very high level of uniformity in the shot wefts being bent.

Condition: new, capacity 90 degrees: round 240 mm capacity 90 degrees: square 240 mm 165 x 310 mm saw band length 2725 x 27 x 0,9 mm mm table height 890 mm band speed 35 / 70 m/min total power requirement 1,1 kW weight of the machine ca. 0,35 t Dimensions (LxWxH) 1,7 x 0,75 x 1,8 m The Z252/DG has the following equipment: - hydraulic cylinder, Iodshpktvjpfx Ad Rsat - emulsion pump, - eccentric clamp, - base, - saw blade, - 400V plug -16A- The machine is delivered fully assembled and ready for immediate use.

Condition: new, Year of construction: 2026, Drilling and milling machine Kudu with CNC control and tool changer (3-axis) drilling and milling machine with movable processing unit - the table remains stationary, the drill head moves. The drilling machine can be used both manually and fully automatically. After each drilling process, the processing unit moves to the next drilling position fully automatically in the X and Y axes. Operation is kept very simple. The data can be transferred to the machine control using the file formats DXF./DWG. be carried out via a programming station. Alternatively, the system can also be programmed directly on the machine control. The system is very robust and consists of proven machine components. Technical data: • Measuring length: 6,000 mm • Total length: 8,050 mm • Stable machine base • Drilling head speed: up to 2500 rpm (standard version), is supplied with the right speed for your application. • Tool holder: SK 40 • Drive of the X, Y and Z-axes via servomotors • Rapid traverse in the X-axis: 20 m/min • Rapid traverse in the Y-axis: 5 m/min • Distance from upper edge of table to lower edge of tool holder 400 mm • Table width 480 mm • Working height: 1050 mm • Drilling diameter: 3 to 30 mm in St. 50 (depending on the tool) • Tapping: M4 - M30 (with compensating chuck) • Machining path in the Y axis: 300 mm • Tolerance in the X axis: + - 0.1 mm • Tolerance in the Y-axis: 0.06 mm • Tolerance in the Z-axis: 0.06 mm • Drill head drive motor: 5.5 kW • System weight: 2300 kg • System dimensions: 8050 mm x 3000 mm x 2388 mm (see layout plan) • Power connection: 32 A • Air connection: 8 bar • Protection of the system at the front via light barrier • Access protection at the rear, machine fence • Control touch screen panel 21.5", reinforced front glass • Easy programming on the Machine • Milling of long holes and circles • Lubrication takes place using a minimum quantity spray system • without material vices • Remote maintenance possible using Teamviewer (LAN interface) • Tool memory for drilling tools, with dimensions, speed • Simulation of work processes • Digital hand wheel Iodpfxsfu Ivzs Ad Reat Your advantages • The surface of the workpieces is protected • Clear, graphic surface • Machining directly at the end of the workpiece is not difficult • 50% space saving compared to pushing machining • Chips are collected in the chip tray • Simplest programming & operation • Minimum quantity spray system (standard) • Programming errors are prevented by CAD /CAM excluded

Condition: new, Year of construction: 2026, For sawing e.g. stainless steel, tool steel, hollow sections and solid materials Two-pole drive motor enables saw band speeds of 30 and 65 m/min Monitoring of saw blade tension electromechanically via microswitch When the saw arm is raised, the lowering cylinder locks in the upper position via the solenoid valve - additional locking at the cylinder is therefore not required Saw arm inclined by 25°, thus longer service life of the saw band Precise and robust band guides with adjustable HM plates After completion of the cutting process the saw band stops automatically in the lower end position Lowering of the saw arm by gravity or manually With infinitely adjustable, constant saw arm lowering speed via hydraulic cylinder Dimensions and weights length approx. 1200 mm width/depth approx. 650 mm height approx. 1800 mm Weight approx. 270 kg Electrical data Supply voltage 400 V Mains frequency 50 Hz Machine data Saw band speed(s) 30 / 65 m/min Speed levels 2 Saw band length 2450 mm Saw band width 27 mm Saw band thickness 0,9 mm Material feed Table height material feed 925 mm Cutting range 0° round (tube) 220 mm Iasdpfx Adsg U Uv Ro Ret 0° round (solid material) 120 mm 0° rectangular lying (hollow profile) 230 x 150 mm 0° bundle (tube) 230 x 120 mm -45° round (tube) 160 mm -45° round (solid material) 85 mm -45° rectangular lying (hollow profile) 160 x 90 mm -60° round (tube) 90 mm -60° round (solid material) 55 mm -60° rectangular lying (hollow profile) 90 x 90 mm Art. No.: 3680001 S

Condition: new, Band saw machine Make: METALLKRAFT Model: BMBS 300 x 320 HA-DG Art.no.: 3690041 Condition: New machine cutting range (round): 300 mm belt speed: 20-100 m/min, infinitely variable standard equipped with: - Fully hydraulic, semi-automatic version. after starting, the machine clamps automatically after the end of the cut, it returns to the starting position stops the saw band and opens the vice. - Cutting probe for automatic detection of material height - Horizontal vice, mechanical, hydraulic - Monitoring of saw band tension, electromechanical - Chip clearing brush Iaodpfx Asilg Hdsd Rjt - Measuring stop with scale 1.000 mm - coolant device - Operating instructions

Year of construction: 1996, condition: good (used), machine/vehicle number: xxxx, High performance - bench tapping machines on T-slot plate Technical data: - Tapping capacity approx. M 3 - M 16 - Speed range up to 500 rpm - Working range ( swivel radius ) 2500 mm - Quick-change tool holder size 2 diam.31 - various inserts for quick-change tool holder Isdof Tcy Djpfx Ad Rsat - Table surface with 5 T-slots 2050 x 900 mm . table height 910 mm - Machine vice with jaw width 200 mm - 3 jaw chucks 250 mm - pneumatic connection with pressure reducer - mobile underframe - space requirement approx. W 2400 x H 2000 x D 1000 mm - weight approx. 1100 kg

Condition: new, Model Name Iasdsgvquwjpfx Ad Rjt Shark 332-1 CCS

Condition: like new (used), Year of construction: 2022, 600 Kg load capacity welding rotary table adjustable in height with through hole 100 - 200mm plate diameter 700mm height horizontal min. 0,65m, max. 1,25m height tilted min. 0,45m, max. 0,95m speed from 0,01 - 1,1 rpm Tilt up to 135 Isdpfxod Anz Ro Ad Roat hand and foot remote control with speed indicator very robust

Condition: new, Year of construction: 2023, Welding turntable, tank turning device 6000 Kg load capacity Didital display with foot remote control diameter from 180mm to 3500 mm Iaedok Adl Hjpfx Ad Rot drive rollers diameter 300mm dimensions: length 1900mm x width 470mm x height 390mm Speed infinitely variable 200 - 1800 mm / min.